Suggestions
Products
See all results for products

DULCOTEST temperature sensors

Measuring ranges 0 – 100 °C

Temperature measurement with DULCOTEST sensors: Can be used for direct temperature measurement or temperature compensation during measurement of pH, fluoride, conductivity, chlorine dioxide or hydrogen peroxide.

Product description

Temperature measurement with the reliable DULCOTEST sensors

Temperature measurement can take place separately or as a correction variable for other measured parameters.

Temperature measurement is used universally, either to directly measure the temperature or for temperature compensation when measuring the following parameters:

  • pH
  • Fluoride
  • Conductivity
  • Chlorine dioxide
  • Hydrogen peroxide

Your benefits

  • Select Pt 100 or Pt 1000, depending on measuring range and accuracy required.
  • Sturdy design with dimensions of a standard pH sensor; the sensor element is integrated in a chemically inert glass sleeve.
  • Easily installed in a similar way to standard pH sensors with a PG 13.5 thread in existing fittings.
  • Transmitter with display/operation and without display/operation for transmission/conversion of the primary signal into a 4-20 mA signal and for transmission to a central control unit (PLC).

Field of application

The following list of applications are general examples of generally suitable applications for this product. Please contact your local sales representative to talk about the applicable use of this product in your specific case / environment.

  • Temperature measurement is universally used either to directly measure the temperature or for temperature compensation.

    Monitoring and Replenishing of Electroplating Baths

    Demanding baths require concentration

    Baths have to be monitored and replenished continually. This requires high concentration - from the sensors, controllers and pumps. Yet only small amounts of precisely fed chemicals are needed.
    more

    Waste Water Treatment in the Paper and Pulp Industry

    Clean waste water is returned to nature

    Very low-impact treatment for waste water. Our intelligent processes efficiently clean and save money too.
    more

    Flotation in Mining

    Frothers and collecting agents

    To remove ore from the flotation liquid faster, activating chemicals (frothers and collecting agents) have to be accurately added by metering. Getting the right amounts is crucial.
    more

    Cooling Water Treatment

    Efficiency is everything in the cooling water circuit

    Everything at ProMinent revolves around the perfect cooling water circuit, which needs to experience few losses over its long life. The precise metering of inhibitors and biocides and suitable filters make this possible.
    more

    Utility Water Treatment

    It makes economic sense to reuse process water.

    Why would you discharge water just because you've used it once? If this water is treated properly, it can be reused with ease, cutting costs in no time.
    more

    Waste Water Treatment

    Very low-impact treatment for waste water

    Our water treatment technology delivers thorough yet environmentally friendly waste water treatment. What's more, with precisely metered additives and optimised processes, you also save money.
    more

    Technical Details

    • Type Pt 100: for wide range measurements and with the controllers D1C, DAC and DULCOMARIN 3
    • Type Pt 1000: for high resolution with transmitter DMT and controllers DAC and DULCOMARIN 3

    DULCOTEST Temperature Sensors

    Temperature measurement with DULCOTEST sensors: Can be used for direct temperature measurement or temperature compensation during measurement of pH, fluoride, conductivity, chlorine dioxide or hydrogen peroxide.

    Your Benefits

    • Select Pt 100 or Pt 1000, depending on measuring range and accuracy required.
    • Sturdy design with dimensions of a standard pH sensor; the sensor element is integrated in a chemically inert glass sleeve.
    • Easily installed in a similar way to standard pH sensors with a PG 13.5 thread in existing fittings.
    • Transmitter with display/operation and without display/operation for transmission/conversion of the primary signal into a 4-20 mA signal and for transmission to a central control unit (PLC).

    Technical Details

    • Type Pt 100: for wide range measurements and with the controllers D1C, DAC and DULCOMARIN 3
    • Type Pt 1000: for high resolution with transmitter DMT and controllers DAC and DULCOMARIN 3

    Field of Application

    • Temperature measurement is universally used either to directly measure the temperature or for temperature compensation.

    Temperature

    0…100 °C

    Max. pressure

    10.0 bar

    Thread

    PG 13.5

    Electrical Connection

    SN6

    Typical applications

    Temperature measurement and pH temperature correction.

    Order no.

    Pt 100-SE temperature sensor

    305063

    Pt 1000-SE temperature sensor

    1002856

    Downloads for DULCOTEST temperature sensors

    More in the Download Centre

    0 Results
    Filter by document type
    Application Example / Reference (0)
    Brochure / Flyer (0)
    Catalogue (0)
    Certificate / Declaration (0)
    Data Sheet (0)
    Drawing / Dimensional Drawing / 3D (0)
    Exploded View / Spare Parts (0)
    Material Safety Data Sheet (0)
    Operating Instructions (0)
    Others (0)
    Press Release (0)
    Publication / Article (0)
    Software (0)
    Wiring Diagram (0)
    Selected filters:

    Matching downloads

    Sort by Document type
    Load more matches ...
    No more matches available!

    Unfortunately, we did not find an appropriate match.

    All words written correctly?
    Search again with fewer or different search terms?

    Please try again later

    Service Unavailable

    The server is temporarily unable to service your request due to maintenance downtime or capacity problems. Please try again later.

    Overview

    Temperature measurement with the reliable DULCOTEST sensors

    Temperature measurement can take place separately or as a correction variable for other measured parameters.

    Temperature measurement is used universally, either to directly measure the temperature or for temperature compensation when measuring the following parameters:

    • pH
    • Fluoride
    • Conductivity
    • Chlorine dioxide
    • Hydrogen peroxide

    Your benefits

    • Select Pt 100 or Pt 1000, depending on measuring range and accuracy required.
    • Sturdy design with dimensions of a standard pH sensor; the sensor element is integrated in a chemically inert glass sleeve.
    • Easily installed in a similar way to standard pH sensors with a PG 13.5 thread in existing fittings.
    • Transmitter with display/operation and without display/operation for transmission/conversion of the primary signal into a 4-20 mA signal and for transmission to a central control unit (PLC).

    Application

    Technical Data

    Downloads

    Contact us

    ProMinent GmbH


    +49 6221 842 0   
    Send request    

    »Please send us your request! We will contact you shortly.«

    +49 6221 842 0  Send request   

    Spare Parts and Accessories

    Matching Products

    DULCOTEST sensors for chlorine dioxide

    Graduated measuring ranges 0.01 – 10 mg/l

    Chlorine dioxide measurement with DULCOTEST sensors offers precise, reliable, application-specific measured values in real-time for all oxidation and disinfection tasks.

    more

    DULCOTEST pH sensors

    Graduated pH measuring ranges 0 – 14

    pH measurements with DULCOTEST sensors: Precise, reliable and application-adapted measured values in real-time. Control, regulate and monitor chemical processes with the aid of precise measured values.

    more

    DULCOTEST sensors for fluoride

    Graduated measuring ranges 0.05 – 100 mg/l

    Accurate measurement of fluoride with DULCOTEST sensors in the monitoring of potable water and wastewater, suitable for pH values up to 9.5.

    more

    DULCOTEST sensors for hydrogen peroxide

    Graduated measuring ranges 0.2 – 2,000 mg/l, special measuring ranges up to 100,000 mg/l

    Hydrogen peroxide measurement with DULCOTEST sensors: Efficient and reliable determination of the concentration of hydrogen peroxide - can be used in a wide range of applications.

    more

    Controller DULCOMETER diaLog DACb

    Do you wish for a simple controller for water analysis? One that is easy to operate and with which you can freely select between all common measured variables per channel? There is one: our all-rounder DULCOMETER diaLog DACb! What is more, it is Ethernet-/LAN-capable and can be ideally integrated into existing networks.

    more

    Controller DULCOMETER D1Cb/D1Cc

    The controller DULCOMETER D1Cb/D1Cc can be used for control tasks in potable water treatment, wastewater treatment and many other areas. Safe, convenient and clear, thanks to the large illuminated graphic display, plain text operating menu and pH sensor monitoring.

    more

    Controller DULCOMETER Compact

    As a controller in water analysis, the DULCOMETER Compact is the correct controller for control tasks that require only a 1-way control.

    more

    DULCOTEST sensors for conductivity

    Graduated measuring ranges 0.01 µS/cm – 2,000 mS/cm

    Conductivity sensors for optimum process integration: DULCOTEST sensors meet a wide range of measuring requirements and allow the best solution to any given measuring task to be achieved.

    more

    Practical examples for this product

    +49 6221 842 0
    Request
    Newsletter
    Call
    Request
    Newsletter