Suggestions

Transmitter DULCOMETER DMTa

The transmitter DULCOMETER DMTa converts the sensor signals for pH, ORP value, chlorine concentration and conductivity into an interference-insensitive 4-20 mA analogue signal. Flexible, safe and always the optimum resolution of measured value.

Product description

The compact 2-wire transmitter – the link to the PLC and DULCOMETER.

The 2-wire transmitter DMTa converts the following sensor signals into an interference-insensitive 4-20 mA analogue signal: pH, ORP, temperature, chlorine and conductivity.

It is fed via the 2-wire analogue input of a PLC or via a 2-wire analogue input of a ProMinent controller. The 4-20 mA analogue current proportional to the measured value is transmitted via the same two lines.

The DMTa offers an on-site calibration When a metering pump has been installed, the capacity in litres per hour has to be determined under ... more in the glossary option of the sensor and galvanic separation between the sensor input and measured value output.

Your benefits

  • Flexibility in the choice of measured variable with pH, ORP and temperature
  • Excellent operational safety, thanks to sensor monitoring (pH)
  • Galvanic isolation between the sensor and supply
  • Always the optimum measured value resolution by auto-ranging with conductivity measurement
  • Safety through sensor monitoring of pH for glass breakage and line breakage
  • Various installation options: wall-mounted, installation on an upright or in a control cabinet

Field of application

The following list of applications are general examples of generally suitable applications for this product. Please contact your local sales representative to talk about the applicable use of this product in your specific case / environment.

  • Process engineering
  • Food and beverage industry
  • Pharmaceuticals
  • Wastewater treatment
  • Power station technology

    Technical Details

    • Measured variables: pH, ORP, chlorine, temperature and conductivity
    • Precision: 0.5 % of the measuring range limit value
    • Correction variable: Temperature via Pt 100/Pt 1000 (pH, chlorine, conductivity)
    • Communication interface: PROFIBUS DP (wall-mounted only)
    • Degree of protection: IP 65 (wall-mounted, pipe-mounted), IP 54 (installation in a control cabinet)
    • Display: Graphic display

    Technical Data

    Measuring range

    pH - 1.00 … 15.00
    -1200 … +1200 mV redox potential
    0.01 … 50.0 mg/l Chlorine
    -20 … +150 °C
    1 µS/cm … 200 mS/cm (auto-ranging), depending on the cell constant

    Cell constant

    0.006 … 12.0/cm for conductivity

    Resolution

    0.01 pH
    1 mV
    0.1 % of measuring range for chlorine
    0.1 °C
    Conductivity 1/1000 of display value (min. 0.001 μS/cm)

    Accuracy

    0.5% from measurement range

    Measurement input

    mV terminal (pH, ORP); input resistance > 5 x 1011 Ω
    Chlorine terminal (DMT chlorine sensors)
    Pt 100/1000 terminal
    Conductivity terminal (2 or 4-line connection)

    Correction variable

    Temperature via Pt 100/1000 (pH, chlorine, conductivity)

    Correction range temp.

    Chlorine: 5 … 45 °C, pH: 0 … 100 °C, conductivity: 0 … 100 °C

    Min. current loop

    4 mA

    Max. current loop

    20 mA

    Fault current

    23 mA

    Feed voltage

    2-wire transmitter, 16... 35 V DC, nominal 24 V
    PROFIBUS DP design, 16... 30 V DC, 24 V nominal

    Communication interface

    PROFIBUS DP (wall-mounted only)

    Min. ambient temperature

    0 °C

    Max. ambient temperature

    55 °C

    Climate

    Relative humidity up to 95% (non-condensing)

    Enclosure rating

    IP 65 (wall-mounted, pipe-mounted)
    IP 54 (installation in a control cabinet)

    Display

    graphical display

    Housing material

    PPE

    Dim. H

    135 mm

    Dim. B

    125 mm

    D dimension

    75 mm

    Weight

    0.45 kg

    Downloads for Transmitter DULCOMETER DMTa

    More in the Download Centre

    0 Results
    Filter by document type
    Application Example / Reference (0)
    Brochure / Flyer (0)
    Catalogue (0)
    Certificate / Declaration (0)
    Data Sheet (0)
    Drawing / Dimensional Drawing / 3D (0)
    Exploded View / Spare Parts (0)
    Material Safety Data Sheet (0)
    Operating Instructions (0)
    Others (0)
    Press Release (0)
    Publication / Article (0)
    Software (0)
    Wiring Diagram (0)

    Selected filters:

    Matching downloads

    Sort by Document type
    Load more matches ...
    No more matches available!

    Unfortunately, we did not find an appropriate match.

    All words written correctly?
    Search again with fewer or different search terms?

    Please try again later

    Service Unavailable

    The server is temporarily unable to service your request due to maintenance downtime or capacity problems. Please try again later.

    Overview

    The compact 2-wire transmitter – the link to the PLC and DULCOMETER.

    The 2-wire transmitter DMTa converts the following sensor signals into an interference-insensitive 4-20 mA analogue signal: pH, ORP, temperature, chlorine and conductivity.

    It is fed via the 2-wire analogue input of a PLC or via a 2-wire analogue input of a ProMinent controller. The 4-20 mA analogue current proportional to the measured value is transmitted via the same two lines.

    The DMTa offers an on-site calibration When a metering pump has been installed, the capacity in litres per hour has to be determined under ... more in the glossary option of the sensor and galvanic separation between the sensor input and measured value output.

    Your benefits

    • Flexibility in the choice of measured variable with pH, ORP and temperature
    • Excellent operational safety, thanks to sensor monitoring (pH)
    • Galvanic isolation between the sensor and supply
    • Always the optimum measured value resolution by auto-ranging with conductivity measurement
    • Safety through sensor monitoring of pH for glass breakage and line breakage
    • Various installation options: wall-mounted, installation on an upright or in a control cabinet

    Application

    Technical Data

    Downloads

    Contact us

    »Please send us your request! We will contact you shortly.«

    +49 6221 842 0  Send request   

    Matching Products

    All-purpose solenoid-driven metering pump for metering liquid media in water treatment and chemical processes: Solenoid-driven metering pump beta. Cost-effective, overload-proof and adaptable to existing signal transducers.

    more

    The peristaltic pump DULCOFLEX DF2a meters chemicals functionally, cost-effectively and quietly – ideal for use in swimming pools, hot tubs, and in spa and wellness facilities.

    more

    The peristaltic pump DULCOFLEX DF4a for metering flocculants and activated charcoal treats water precisely and accurately. It is ideal for use in swimming pools, hot tubs or spa and wellness facilities. An operating pressure up to 4 bar is possible.

    more

    The controller DULCOMETER D1Cb/D1Cc can be used for control tasks in potable water treatment, wastewater treatment and many other areas. Safe, convenient and clear, thanks to the large illuminated graphic display, plain text operating menu and pH sensor monitoring.

    more

    The measuring and control system DULCOMARIN 3 is your digital link to the technology of the future. It controls the entire range of swimming pools – from adventure pools to private pools – and is used as a multi-pool system for up to 16 filter circuits.

    more

    Photometers measure nearly all disinfectants and the pH value based on the photometric principle. They are portable, compact and make safe, simple measurement possible.

    more

    As a nanofiltration system, the DULCOSMOSE NF, a compact and value-for-money unit, can handle partial desalination in industrial applications. Maximum permeate output at low operating pressures ensures low operating costs thanks to the "ultra low pressure" diaphragm.

    more

    Ultrafiltration system DULCOCLEAN UF reliably and safely uses membrane technology to remove turbidity, particles and microbiological contamination.

    more

    ORP measurements with DULCOTEST sensors: Precise, reliable and application-adapted measured values in real-time. Can be used in water treatment or industrial process waters with strict requirements.

    more

    Chlorine dioxide measurement with DULCOTEST sensors offers precise, reliable, application-specific measured values in real-time for all oxidation and disinfection tasks.

    more

    The application-based DULCOTEST sensors for free chlorine deliver precise measured values and a high degree of monitoring and process reliability in any disinfection application.

    more

    Disinfection of swimming pool water with the application-optimised DULCOTEST sensors for total available chlorine - exact measured values and high process reliability guaranteed.

    more

    Reliably measure total chlorine with the versatile DULCOTEST sensors for total chlorine. Accurate measured values and a high degree of monitoring and process reliability are guaranteed.

    more

    Temperature measurement with DULCOTEST sensors: Can be used for direct temperature measurement or temperature compensation during measurement of pH, fluoride, conductivity, chlorine dioxide or hydrogen peroxide.

    more

    Conductivity sensors for optimum process integration: DULCOTEST sensors meet a wide range of measuring requirements and allow the best solution to any given measuring task to be achieved.

    more