The ProMinent® alpha is a metering pump designed for simple operations. It is especially suited to continuous dosing.
Advantages
- High suction capacity, smooth dosing stroke and constantly accurate dosing
- Robust bodywork: Strong shaded pole motor with gear, shock-resistant and chemical resistant housing of glass fibre reinforced plastics, controlled eccentric for stroke agitation
- Constant operation event with outgasing media possible thanks to combined ventilation valve with integrated fine ventilation screw for continuous, automatic ventilation at full operation pressure
- Good adjustment to precise use by 4 different gear reductions and liquid ends in 3 sizes and 2 materials
Features
- Capacity range 0.5 - 21 l/h, 10 - 4 bar
- Adjustment of dosing capacity via stroke length adjustment in 10% steps from 0 to 100%
- Stroke length adjustment via eccentricity adjustments
- Diaphragm control from middle run
- Coercive control of suction and discharge strokes
- Smooth, sinusoidal stroke run for suction and dosing stroke
- Constant stroke frequency
- Liquid end in PP or Acrylic/PVC
- Liquid end with double ball-valve on suction and pressure sides
- Spring-loaded valves for highly viscous media
- Patented coarse/fine ventilation for continous, automatic ventilation
- Controlled via mains ON/OFF connection
Technical Data
|
50 Hz Version |
60 Hz Version |
| Pump Type |
bar |
l/h |
strokes
/min. |
bar |
l/h |
strokes
/min. |
suction lift
m WS |
Connector dimensions
Ø × i Ø mm |
| 1001 |
10,0 |
1,2 |
30 |
10,0 |
1,4 |
36 |
6 |
8 × 5 |
| 1002 |
10,0 |
2,4 |
58 |
10,0 |
2,9 |
69 |
6 |
8 × 5 |
| 1003 |
10,0 |
3,5 |
88 |
10,0 |
4,2 |
105 |
6 |
8 × 5 |
| 0804 |
7,5 |
4,0 |
30 |
7,5 |
5,0 |
36 |
6 |
8 × 5 |
| 0808 |
7,5 |
8,0 |
58 |
7,5 |
9,5 |
69 |
6 |
8 × 5 |
| 0612 |
5,5 |
12,0 |
88 |
5,5 |
14,0 |
105 |
6 |
8 × 5 |
| 0419 |
4,0 |
18,5 |
128 |
4,0 |
21,5 |
154 |
6 |
8 × 5 |
Materials in Contact with Chemicals
|
Liquid end |
Suction/Discharge Connector |
Seals |
Valve balls |
Patented Ventilation |
| PP1 |
Polypropylene |
Polypropylene |
EPDM |
Ceramic |
Yes |
| PP2 |
Polypropylene |
Polypropylene |
FPM A* |
Ceramic |
Yes |
| PP3 |
Polypropylene |
Polypropylene |
FPM B* |
Ceramic |
Yes |
| NP3 |
Acrylic glass(PMMA) |
PVC |
FPM B* |
Ceramic |
Yes |
| NP6 |
Acrylic glass
(PMMA) |
PVC |
FPM* |
Ceramic |
No |
DEVELOPAN® dosing diaphragms with PTFE coating for all versions.
*FPM: Fluoric caoutchouc
|