Suggestions

Controller DULCOMETER Compact

As a controller in water analysis, the DULCOMETER Compact is the correct controller for control tasks that require only a 1-way control.

Product description

Compact yet fully equipped - the basic water analysis unit

The DULCOMETER Compact controller is a one-channel PID controller Controls processes automatically to ensure that the specified values (e.g. pH: acid or alkaline) are maintained even in the event of interfering influences. more in the glossary for the measured variables The physical variables to be determined by measuring. more in the glossary pH, ORP, chlorine and inductive conductivity. It can monodirectionally control the measured variable, monitor limit values and transmit the measured value via an mA output, e.g. to a PLC. The mA output can optionally also be configured as a controlled variable output. The controller has one pulse frequency output to control one metering pump. One output relay can optionally be used as an alarm or limit value or to control motor-driven metering pumps or solenoid valves. A digital input is used to switch off the control or to process a sample water limit contact by remote control. The impact of temperature on the measurements can be provided by temperature measurement or by manual input. Menu-driven operation is language-independent.

Your benefits

  • Flexibility in the choice of measured variable for pH and ORP
  • Always the optimum measured value resolution by using auto-ranging with the conductivity measurement
  • Depending on the requirement, various display options for conductivity, such as: conductivity, TDS (Total Dissolved Solids), salinity and specific resistance
  • Safety thanks to sensor monitoring with pH for glass breakage and line breakage
  • Various installation options: wall-mounted, installation on an upright or in a control cabinet

Field of application

The following list of applications are general examples of generally suitable applications for this product. Please contact your local sales representative to talk about the applicable use of this product in your specific case / environment.

  • Measurement and control of water parameters in industrial and process water treatment plants
  • Permeate monitoring in reverse osmosis systems
  • Measurement and control of the hygiene parameters in swimming pools

    Technical Details

    • Measured variables: pH, ORP, chlorine, conductive and inductive conductivity
    • Method of installation, degree of protection: Combination housing (wall mounting, control panel mounting, pillar assembly) IP 67, control panel IP 54
    • Measurement: 1 measuring channel, temperature compensation for conductivity and pH
    • Control: PID controller, monodirectional controller (e.g. with pH acid or alkali)
    • Control inputs: 1 digital control input

    Technical Data

    Measuring range

    pH: 0 ... 14
    ORP: -1000 ... +1000 mV
    Chlorine: 0.05 ... 5 ppm, shock metering up to 10 ppm, max. 12 h with chlorine sensors CLB 4-μA-5 ppm and CLB 5-μA-5 ppm
    Conductive conductivity: 0.5 µS/cm ... 20 mS/cm (auto-ranging)
    Inductive conductivity with ICT 2: 20 µS/cm ... 2000 mS/cm (auto-ranging)
    Inductive conductivity with ICT 5: 200 μS/cm ... 2000 mS/cm (auto-ranging)

    Resolution

    pH: 0.01 pH
    ORP: 1 mV
    Chlorine: 0.01 ppm
    Conductivity: 0.1 µS/cm (depends on the measuring range)

    Accuracy

    0.5% of the upper range value

    Temperature compensation range

    0 ... 120 °C, chlorine 1 ... 45 °C

    Control

    Monodirectional PID control with selectable control direction

    Inputs

    Sensor input for the relevant measured variable
    Temperature sensor input: pH: Pt 1000, chlorine and conductivity: Pt 100/ Pt 1000
    1 digital input as a remote control input for the pause control/sample water fault functions

    Outputs

    1 pulse frequency output for controlling metering pumps
    1 active 0/4…20 mA output configurable as a measured or control variable, max. load: 400 Ω
    1 output relay used as a changeover contact, can be configured as an alarm, limit value or pulse width-modulated control output for motor-driven metering pumps

    Cell constant, conductive conductivity

    0.05 ... 12.0 cm-1

    Voltage supply

    100 ... 230 V, 50/60 Hz, 5 W

    Permissible operating temperature

    -10 ... +60 °C

    Enclosure rating

    IP 67, based on NEMA 4 X Indoor

    Dimensions

    135 x 125 x 75 mm (H x W x D)

    Weight

    0.5 kg

    Downloads for Controller DULCOMETER Compact

    More in the Download Centre

    0 Results
    Filter by document type
    Application Example / Reference (0)
    Brochure / Flyer (0)
    Catalogue (0)
    Certificate / Declaration (0)
    Data Sheet (0)
    Drawing / Dimensional Drawing / 3D (0)
    Exploded View / Spare Parts (0)
    Material Safety Data Sheet (0)
    Operating Instructions (0)
    Others (0)
    Press Release (0)
    Publication / Article (0)
    Software (0)
    Wiring Diagram (0)

    Selected filters:

    Matching downloads

    Sort by Document type
    Load more matches ...
    No more matches available!

    Unfortunately, we did not find an appropriate match.

    All words written correctly?
    Search again with fewer or different search terms?

    Please try again later

    Service Unavailable

    The server is temporarily unable to service your request due to maintenance downtime or capacity problems. Please try again later.

    Overview

    Compact yet fully equipped - the basic water analysis unit

    The DULCOMETER Compact controller is a one-channel PID controller Controls processes automatically to ensure that the specified values (e.g. pH: acid or alkaline) are maintained even in the event of interfering influences. more in the glossary for the measured variables The physical variables to be determined by measuring. more in the glossary pH, ORP, chlorine and inductive conductivity. It can monodirectionally control the measured variable, monitor limit values and transmit the measured value via an mA output, e.g. to a PLC. The mA output can optionally also be configured as a controlled variable output. The controller has one pulse frequency output to control one metering pump. One output relay can optionally be used as an alarm or limit value or to control motor-driven metering pumps or solenoid valves. A digital input is used to switch off the control or to process a sample water limit contact by remote control. The impact of temperature on the measurements can be provided by temperature measurement or by manual input. Menu-driven operation is language-independent.

    Your benefits

    • Flexibility in the choice of measured variable for pH and ORP
    • Always the optimum measured value resolution by using auto-ranging with the conductivity measurement
    • Depending on the requirement, various display options for conductivity, such as: conductivity, TDS (Total Dissolved Solids), salinity and specific resistance
    • Safety thanks to sensor monitoring with pH for glass breakage and line breakage
    • Various installation options: wall-mounted, installation on an upright or in a control cabinet

    Application

    Technical Data

    Downloads

    Contact us

    »Please send us your request! We will contact you shortly.«

    +49 6221 842 0  Send request   

    Matching Products

    CHLORINSITU IIa is a compact on-site electrolysis system for the production of a low-chlorate hypochlorite solution from salt and electricity. Key advantages are its simple process management and excellent system safety through integrated ventilation and bleeding.

    more

    Ultra-pure or low-chloride and low-chlorate sodium hypochlorite requires specialist plant engineering. The electrolysis system CHLORINSITU III is the solution for you.

    more

    Generation of sodium hypochlorite solution for smaller swimming pools and pools.

    more

    Produce high-purity chlorine gas in a vacuum process. Cost-effective, robust and compact.

    more

    Electrolysis systems of type CHLORINSITU V take the place of the chlorine gas system in the swimming pool and only need salt, water and electricity to do so.

    more

    Electrolysis systems of type CHLORINSITU V Plus generate ultra-pure chlorine gas directly on site and only need salt, water and electricity to do so. Peaks in demand can be covered by this system (Plus system). They are especially well suited to systems for disinfecting potable water, wastewater, process water and water in swimming pools and cooling towers.

    more

    Efficient production of the highly effective disinfectant DULCOLYT 400 with an exceptionally low chloride and chlorate content. Ideal for particularly sensitive applications in the beverage and food industry, e.g. for the production of baby food. Maximum protection against corrosion and very good cost efficiency.

    more

    All-purpose solenoid-driven metering pump for metering liquid media in water treatment and chemical processes: Solenoid-driven metering pump beta. Cost-effective, overload-proof and adaptable to existing signal transducers.

    more

    The solenoid-driven diaphragm metering pump gamma incorporates a wealth of eX cellent ingenuity! With integrated pressure measurement, it ensures the smooth running of your metering process. The gamma/ X is ideal for all metering work involving liquid media.

    more

    The gamma/ XL is a smart, connectible solenoid-driven metering pump that is setting new standards in terms of productivity, reliability and cost-effectiveness.

    more

    The motor-driven metering pump alpha is the metering pump for liquid media and the optimum solution for simple applications. Robust, low-noise, chemical-resistant, with precise metering and good suction capacity.

    more

    The Sigma/ 1 Basic is an extremely robust motor-driven metering pump with patented multi-layer safety diaphragm for excellent process reliability. It offers a wide range of power end designs, such as three-phase or 1-phase AC motors, also for use in areas at risk from explosion.

    more

    The Sigma control type is a smart motor-driven metering pump that is setting new standards in terms of productivity, reliability and safety.

    more

    Robust motor-driven metering pumps like the Sigma/ 2 Basic guarantee excellent process reliability with their patented multi-layer safety diaphragm. The diaphragm metering pump offers a number of power end versions, also suitable for use in areas at risk from explosion.

    more

    The Sigma control type is a smart motor-driven metering pump that is setting new standards in terms of productivity, reliability and safety.

    more

    The patented multi-layer safety diaphragm for excellent process reliability is just one feature of the extremely robust motor-driven metering pump Sigma/3 Basic. It also offers a wide range of power end versions, such as three-phase or 1-phase AC motors, also for use in ATEX areas.

    more

    The Sigma control type is a smart motor-driven metering pump that is setting new standards in terms of productivity, reliability and safety.

    more

    The peristaltic pump DULCOFLEX DF2a meters chemicals functionally, cost-effectively and quietly – ideal for use in swimming pools, hot tubs, and in spa and wellness facilities.

    more

    The peristaltic pump DULCOFLEX DF4a for metering flocculants and activated charcoal treats water precisely and accurately. It is ideal for use in swimming pools, hot tubs or spa and wellness facilities. An operating pressure up to 4 bar is possible.

    more

    For storing and metering liquid chemicals use a selection guide (identity code) to quickly and flexibly adapt your metering system to your metering task.

    more

    DULCODOS panel is a complete metering system for reliable chemical metering. It is now even more space-saving and quickly available – our new standards ensure this. You can select perfectly coordinated components depending on material resistance, pump capacity and function.

    more

    The controller DULCOMETER D1Cb/D1Cc can be used for control tasks in potable water treatment, wastewater treatment and many other areas. Safe, convenient and clear, thanks to the large illuminated graphic display, plain text operating menu and pH sensor monitoring.

    more

    Do you wish for a simple controller for water analysis? One that is easy to operate and with which you can freely select between all common measured variables per channel? There is one: our all-rounder DULCOMETER diaLog DACb! What is more, it is Ethernet-/LAN-capable and can be ideally integrated into existing networks.

    more

    The measuring and control system DULCOMARIN 3 is your digital link to the technology of the future. It controls the entire range of swimming pools – from adventure pools to private pools – and is used as a multi-pool system for up to 16 filter circuits.

    more

    Photometers measure nearly all disinfectants and the pH value based on the photometric principle. They are portable, compact and make safe, simple measurement possible.

    more

    Monitoring and treatment of potable and similar types of water with DULCOTROL Potable water/F&B – the compact measuring and control system specially designed for water treatment in waterworks and in the food and beverage industry.

    more

    Monitoring and treatment of wastewater with DULCOTROL Wastewater – the compact measuring and control system specially designed for applications in municipal and industrial wastewater treatment.

    more

    As a nanofiltration system, the DULCOSMOSE NF, a compact and value-for-money unit, can handle partial desalination in industrial applications. Maximum permeate output at low operating pressures ensures low operating costs thanks to the "ultra low pressure" diaphragm.

    more

    Ultrafiltration system DULCOCLEAN UF reliably and safely uses membrane technology to remove turbidity, particles and microbiological contamination.

    more

    ORP measurements with DULCOTEST sensors: Precise, reliable and application-adapted measured values in real-time. Can be used in water treatment or industrial process waters with strict requirements.

    more

    pH measurements with DULCOTEST sensors: Precise, reliable and application-adapted measured values in real-time. Control, regulate and monitor chemical processes with the aid of precise measured values.

    more

    The application-based DULCOTEST sensors for free chlorine deliver precise measured values and a high degree of monitoring and process reliability in any disinfection application.

    more

    Temperature measurement with DULCOTEST sensors: Can be used for direct temperature measurement or temperature compensation during measurement of pH, fluoride, conductivity, chlorine dioxide or hydrogen peroxide.

    more

    Conductivity sensors for optimum process integration: DULCOTEST sensors meet a wide range of measuring requirements and allow the best solution to any given measuring task to be achieved.

    more