|
|
 |
|
|
| Features |
Advantages and benefits |
|
- Modular design for up to five (more on request) sensors of any type (PG 13.5 and/or R 1" thread)
|
- Cost effective and simple upgrading/backfitting through variable modules
- Enhanced measuring- and process safety through flow monitor module
- Robust against electrical interference through a potential equaliser pin
- Simple assembly (pre-mounted on panel)
- Quick response time of the measurement because of low volume capacity
- Save calibration at the location of the sensor by means of a sampling tap
|
 | |
|
|
|
|
|
| Features |
Advantages and benefits |
|
- Multiple housing for four sensors (pH, ORP, conductivitiy, temeperature, fluoride; PG 13.5 thread)
|
- Simple cleaning of the sensor housing and sensor due to a removable housing cup
- Cup can be used as container for a calibration solution
- Enhanced measuring- and process safety as housing is robust against electrical interference due to a potential equaliser pin
- Simple mounting for quick installation
- Quick response time of the measurement because of low volume capacity
|
 | |
|
|
|
|
Immersion Assembly IPHa 1 |
|
|
|
|
|
| Features |
Advantages and benefits |
|
- For one sensor (pH, ORP, conductivity, temperature; PG 13.5 thread)
- Immersion depths: 1 m, 2 m
|
- Fits a transmitter beside the electrode
- Simple drawing back of the pipe and modification of the length by the customer due to missing fittings
- Enhanced measuring- and process safety as housing is robust against electrical interference due to a potential equaliser pin
- Simple and quick installation
- High variability due to a lot of accessories
- Assembly to a flange possible
|
 | |
|
|
|
|
Immersion Assembly IPHa 3 |
|
|
|
|
|
| Features |
Advantages and benefits |
|
- For up to three electrodes (pH, ORP, conductivity, temperature, fluoride; PG 13.5 thread)
- Immersion depths: 1 m, 2 m
|
- Fits up to three transmitters beside the electrode(s)
- Simple drawing back of the pipe and modification of the length by the customer due to missing fittings
- Enhanced measuring- and process safety as housing is robust against electrical interference due to a potential equaliser pin
- Simple and quick installation
- High variability due to a lot of accessories
- Assembly to a flange possible
|
 | |
|
|
|
|
IMA-ICT 1 Immersion Housing |
|
|
|
|
|
| Features |
Advantages and Benefits |
|
- For one inductive conductivity sensor type ICT 1-IM, immersion depth 1 m, 2 m
|
- A large accessory range enables variable, safe, simple and quick assembly
- Flange mounting possible
- Also available with sensor and completely pre-mounted for quick and safe assembly (see sensor ICT 1-IMA)
- Cost-effective
|
 | |
|
|
|
|
Insertion Housing Adapter |
|
|
|
|
|
| Features |
Advantages and benefits |
|
- For one sensor (pH, ORP, temperature, conductivity; PG 13.5 thread)
- Mounting: Screw in
- Material: PP for temperatures up to 80°C or stainless steel up to 180°C
- Thread: R ½" and R ¾"
|
- Direct and simple assembly in pipes and tanks with enhanced requirements for pressure and temperature
|
 | |
|
|
|
|
Insertion Housing Adapter Set |
|
|
|
|
|
| Features |
Advantages and benefits |
|
- For one sensor (pH, ORP, temperature, conductivity; PG 13.5 thread)
- Mounting: Gluing
- Material: PVC for temperatures up to 50°C
- Pipes: DN 20 and DN 25
|
- Direct and simple assembly in pipes and tanks for standard conditions
- 90° and 45° angle for optimal orientation of the sensor
|
 | |
|
|
|
|
Buit-in Sensor housing for Adapter-Set for Types LM(P) |
|
|
|
|
|
|
|
| |
|
|