Suggestions

Intelligent recycling of backwash water in swimming pools

Reducing the need for fresh water, reducing the operational costs

In accordance with DIN 19645, backwash water can be treated in public swimming pools. To this end, ProMinent has developed a standardised procedure which can be easily adapted to any customer requirements, thanks to its modular construction.

Requirements - Intelligent recycling of backwash water in swimming pools

 

Make sensible use of backwash water and make considerable savings

Public swimming pools are permitted, in accordance with DIN 19645, to treat backwash water and then to re-use it, thus considerably reducing the operating costs. The savings result in a reduction in the need for fresh water and the waste water amounts that can be up to 80% over all lower energy costs.
Using the standard procedures developed by ProMinent for various modules, the backwash water can be efficiently recycled, depending on its intended purpose and quality of the operational water type required: for reuse as fill-water; for cleaning, lavatory cleaning and irrigation as process water or for direct transfer back into the surface water.
The system is available in three sizes for a flow rate of up to 80 m³ per day. Compared to conventional technology, it is particularly suited to the renovation of swimming pools thanks to its minimal footprint. And depending on the water quality that is required, modules for disinfection with chlorine or chlorine dioxide Chlorine dioxide is an exceptionally reactive gas, which is not stored due to its instability ... more in the glossary can be added. The flexible installation and simple commissioning combine with fully-automatic operation are further advantages of this economical solutions.

Downloads for Intelligent recycling of backwash water in swimming pools

More in the Download Centre

0 Results
Filter by document type
Application Example / Reference (0)
Brochure / Flyer (0)
Catalogue (0)
Certificate / Declaration (0)
Data Sheet (0)
Drawing / Dimensional Drawing / 3D (0)
Exploded View / Spare Parts (0)
Material Safety Data Sheet (0)
Operating Instructions (0)
Others (0)
Press Release (0)
Publication / Article (0)
Software (0)
Wiring Diagram (0)

Selected filters:

Matching downloads

Sort by Document type
Load more matches ...
No more matches available!

Unfortunately, we did not find an appropriate match.

All words written correctly?
Search again with fewer or different search terms?

Please try again later

Service Unavailable

The server is temporarily unable to service your request due to maintenance downtime or capacity problems. Please try again later.

Overview

 

Make sensible use of backwash water and make considerable savings

Public swimming pools are permitted, in accordance with DIN 19645, to treat backwash water and then to re-use it, thus considerably reducing the operating costs. The savings result in a reduction in the need for fresh water and the waste water amounts that can be up to 80% over all lower energy costs.
Using the standard procedures developed by ProMinent for various modules, the backwash water can be efficiently recycled, depending on its intended purpose and quality of the operational water type required: for reuse as fill-water; for cleaning, lavatory cleaning and irrigation as process water or for direct transfer back into the surface water.
The system is available in three sizes for a flow rate of up to 80 m³ per day. Compared to conventional technology, it is particularly suited to the renovation of swimming pools thanks to its minimal footprint. And depending on the water quality that is required, modules for disinfection with chlorine or chlorine dioxide Chlorine dioxide is an exceptionally reactive gas, which is not stored due to its instability ... more in the glossary can be added. The flexible installation and simple commissioning combine with fully-automatic operation are further advantages of this economical solutions.

Downloads

Suitable products - Intelligent recycling of backwash water in swimming pools

All-purpose solenoid-driven metering pump for metering liquid media in water treatment and chemical processes: Solenoid-driven metering pump beta. Cost-effective, overload-proof and adaptable to existing signal transducers.

more

The peristaltic pump DULCOFLEX DF4a for metering flocculants and activated charcoal treats water precisely and accurately. It is ideal for use in swimming pools, hot tubs or spa and wellness facilities. An operating pressure up to 4 bar is possible.

more

As a controller in water analysis, the DULCOMETER Compact is the correct controller for control tasks that require only a 1-way control.

more

Ultrafiltration system DULCOCLEAN UF reliably and safely uses membrane technology to remove turbidity, particles and microbiological contamination.

more

The unique UV systems DULCODES LP are synonymous with pioneering water treatment – efficient and free of chemicals.

more

Do you wish for a simple controller for water analysis? One that is easy to operate and with which you can freely select between all common measured variables per channel? There is one: our all-rounder DULCOMETER diaLog DACb! What is more, it is Ethernet-/LAN-capable and can be ideally integrated into existing networks.

more

With DULCONNEX API, you can access your data on request from the DULCONNEX Cloud. Use this for integration into existing process control systems, SCADA, mobile or online apps as well as MES or share data with other digital solutions.

more

The DULCONNEX Inventory Management add-on is an extension to the DULCONNEX Platform. It can be used to monitor tank levels and inventory levels of chemicals at various sites regardless of your location. Tank level monitoring is based on the data of the DULCOLEVEL radar level sensor.

more

Contact us

»Please send us your request! We will contact you shortly.«

+49 6221 842 0  Send request   

News and Events