Air-operated Diaphragm Pump Duodos for pumping liquid media.

The application range of the DULCO^®Trans depends on the chemical resistance of the materials used.

The solenoid-coupled centrifugal pump von Taine^® for the pumping of liquid media works safely and reliably: liquid media are pumped leak-free.

The diaphragm metering pump Makro/ 5 is used to meter reactants and catalysts in the chemical industry. Thanks to its modular construction, it can adapt outstandingly to the actual requirements of each application.

The modular construction of the diaphragm metering pump Makro TZ with adjustable eccentric drive mechanism and mechanically deflected multi-layer safety diaphragm makes it wonderfully adaptable to the capacity requirements of the respective application.

The eccentric screw pump Spectra meters liquid polyelectrolytes in concentrated and dilute form. It can be used, for example, in waste water treatment or sludge dewatering.

As an extremely robust hydraulic diaphragm metering pump, the Hydro/ 2 meets the most exacting safety requirements. Its modular construction, with either one or two dosing heads, 4 gear ratios, 2 dosing head sizes and 3 dosing head materials, offers a very high degree of flexibility in terms of areas of application.

The Hydro/ 3 is an extremely robust hydraulic diaphragm metering pump. It meets the most exacting safety requirements. Its modular construction offers extremely good flexibility in terms of application, for example in the oil and gas industry.

The Hydro/ 4 is an extremely robust hydraulic diaphragm metering pump, which meets the most exacting safety requirements – it is equipped as standard with a pressure relief valve and PTFE multi-layer diaphragm with diaphragm rupture warning system. Its modular construction offers extremely good flexibility in terms of applications.

The Orlita^® Evolution 1 meets the highest safety requirements as an extremely robust hydraulic diaphragm metering pump. It stands out, thanks to its PTFE multi-layer diaphragm with integral diaphragm rupture warning system and unique diaphragm position control. Its modular construction offers extremely good flexibility in terms of applications.

The Orlita^® Evolution 2 meets the highest safety requirements as an extremely robust hydraulic diaphragm metering pump. It stands out, thanks to its PTFE multi-layer diaphragm with integral diaphragm rupture warning system and unique diaphragm position control.

The Orlita^® Evolution 3 meets the highest safety requirements as an extremely robust hydraulic diaphragm metering pump. It stands out, thanks to its PTFE multi-layer diaphragm with integral diaphragm rupture warning system and unique diaphragm position control.

The Orlita^® Evolution 4 meets the highest safety requirements as an extremely robust hydraulic diaphragm metering pump. It stands out, thanks to its PTFE multi-layer diaphragm with integral diaphragm rupture warning system and unique diaphragm position control.

The hydraulic diaphragm metering pump Orlita^® MF offers reliable capacities even under high pressure and has a modular construction, therefore has versatile uses. Thanks to its modular design, this pump is tailored to meet your requirements even at very high pump capacities.

This emptying unit is used to accommodate and empty Big Bags weighing up to 1,000 kg. The Big Bags are suspended in the frame with the aid of a lifting cross bar. The 30-litre powder storage tank is used to transfer the powder into a feed unit.

Air-operated Diaphragm Pump Duodos for pumping liquid media.

The application range of the DULCO^®Trans depends on the chemical resistance of the materials used.

The solenoid-coupled centrifugal pump von Taine^® for the pumping of liquid media works safely and reliably: liquid media are pumped leak-free.

The diaphragm metering pump Makro/ 5 is used to meter reactants and catalysts in the chemical industry. Thanks to its modular construction, it can adapt outstandingly to the actual requirements of each application.

The modular construction of the diaphragm metering pump Makro TZ with adjustable eccentric drive mechanism and mechanically deflected multi-layer safety diaphragm makes it wonderfully adaptable to the capacity requirements of the respective application.

The eccentric screw pump Spectra meters liquid polyelectrolytes in concentrated and dilute form. It can be used, for example, in waste water treatment or sludge dewatering.

As an extremely robust hydraulic diaphragm metering pump, the Hydro/ 2 meets the most exacting safety requirements. Its modular construction, with either one or two dosing heads, 4 gear ratios, 2 dosing head sizes and 3 dosing head materials, offers a very high degree of flexibility in terms of areas of application.

The Hydro/ 3 is an extremely robust hydraulic diaphragm metering pump. It meets the most exacting safety requirements. Its modular construction offers extremely good flexibility in terms of application, for example in the oil and gas industry.

The Hydro/ 4 is an extremely robust hydraulic diaphragm metering pump, which meets the most exacting safety requirements – it is equipped as standard with a pressure relief valve and PTFE multi-layer diaphragm with diaphragm rupture warning system. Its modular construction offers extremely good flexibility in terms of applications.

The Orlita^® Evolution 1 meets the highest safety requirements as an extremely robust hydraulic diaphragm metering pump. It stands out, thanks to its PTFE multi-layer diaphragm with integral diaphragm rupture warning system and unique diaphragm position control. Its modular construction offers extremely good flexibility in terms of applications.

The Orlita^® Evolution 2 meets the highest safety requirements as an extremely robust hydraulic diaphragm metering pump. It stands out, thanks to its PTFE multi-layer diaphragm with integral diaphragm rupture warning system and unique diaphragm position control.

The Orlita^® Evolution 3 meets the highest safety requirements as an extremely robust hydraulic diaphragm metering pump. It stands out, thanks to its PTFE multi-layer diaphragm with integral diaphragm rupture warning system and unique diaphragm position control.

The Orlita^® Evolution 4 meets the highest safety requirements as an extremely robust hydraulic diaphragm metering pump. It stands out, thanks to its PTFE multi-layer diaphragm with integral diaphragm rupture warning system and unique diaphragm position control.

The hydraulic diaphragm metering pump Orlita^® MF offers reliable capacities even under high pressure and has a modular construction, therefore has versatile uses. Thanks to its modular design, this pump is tailored to meet your requirements even at very high pump capacities.

This emptying unit is used to accommodate and empty Big Bags weighing up to 1,000 kg. The Big Bags are suspended in the frame with the aid of a lifting cross bar. The 30-litre powder storage tank is used to transfer the powder into a feed unit.

Air-operated Diaphragm Pump Duodos for pumping liquid media.

The application range of the DULCO^®Trans depends on the chemical resistance of the materials used.

The solenoid-coupled centrifugal pump von Taine^® for the pumping of liquid media works safely and reliably: liquid media are pumped leak-free.

The diaphragm metering pump Makro/ 5 is used to meter reactants and catalysts in the chemical industry. Thanks to its modular construction, it can adapt outstandingly to the actual requirements of each application.

The modular construction of the diaphragm metering pump Makro TZ with adjustable eccentric drive mechanism and mechanically deflected multi-layer safety diaphragm makes it wonderfully adaptable to the capacity requirements of the respective application.

The eccentric screw pump Spectra meters liquid polyelectrolytes in concentrated and dilute form. It can be used, for example, in waste water treatment or sludge dewatering.

As an extremely robust hydraulic diaphragm metering pump, the Hydro/ 2 meets the most exacting safety requirements. Its modular construction, with either one or two dosing heads, 4 gear ratios, 2 dosing head sizes and 3 dosing head materials, offers a very high degree of flexibility in terms of areas of application.

The Hydro/ 3 is an extremely robust hydraulic diaphragm metering pump. It meets the most exacting safety requirements. Its modular construction offers extremely good flexibility in terms of application, for example in the oil and gas industry.

The Hydro/ 4 is an extremely robust hydraulic diaphragm metering pump, which meets the most exacting safety requirements – it is equipped as standard with a pressure relief valve and PTFE multi-layer diaphragm with diaphragm rupture warning system. Its modular construction offers extremely good flexibility in terms of applications.

The Orlita^® Evolution 1 meets the highest safety requirements as an extremely robust hydraulic diaphragm metering pump. It stands out, thanks to its PTFE multi-layer diaphragm with integral diaphragm rupture warning system and unique diaphragm position control. Its modular construction offers extremely good flexibility in terms of applications.

The Orlita^® Evolution 2 meets the highest safety requirements as an extremely robust hydraulic diaphragm metering pump. It stands out, thanks to its PTFE multi-layer diaphragm with integral diaphragm rupture warning system and unique diaphragm position control.

The Orlita^® Evolution 3 meets the highest safety requirements as an extremely robust hydraulic diaphragm metering pump. It stands out, thanks to its PTFE multi-layer diaphragm with integral diaphragm rupture warning system and unique diaphragm position control.

The Orlita^® Evolution 4 meets the highest safety requirements as an extremely robust hydraulic diaphragm metering pump. It stands out, thanks to its PTFE multi-layer diaphragm with integral diaphragm rupture warning system and unique diaphragm position control.

The hydraulic diaphragm metering pump Orlita^® MF offers reliable capacities even under high pressure and has a modular construction, therefore has versatile uses. Thanks to its modular design, this pump is tailored to meet your requirements even at very high pump capacities.

This emptying unit is used to accommodate and empty Big Bags weighing up to 1,000 kg. The Big Bags are suspended in the frame with the aid of a lifting cross bar. The 30-litre powder storage tank is used to transfer the powder into a feed unit.

Air-operated Diaphragm Pump Duodos for pumping liquid media.

The application range of the DULCO^®Trans depends on the chemical resistance of the materials used.

The solenoid-coupled centrifugal pump von Taine^® for the pumping of liquid media works safely and reliably: liquid media are pumped leak-free.

The diaphragm metering pump Makro/ 5 is used to meter reactants and catalysts in the chemical industry. Thanks to its modular construction, it can adapt outstandingly to the actual requirements of each application.

The modular construction of the diaphragm metering pump Makro TZ with adjustable eccentric drive mechanism and mechanically deflected multi-layer safety diaphragm makes it wonderfully adaptable to the capacity requirements of the respective application.

The eccentric screw pump Spectra meters liquid polyelectrolytes in concentrated and dilute form. It can be used, for example, in waste water treatment or sludge dewatering.

As an extremely robust hydraulic diaphragm metering pump, the Hydro/ 2 meets the most exacting safety requirements. Its modular construction, with either one or two dosing heads, 4 gear ratios, 2 dosing head sizes and 3 dosing head materials, offers a very high degree of flexibility in terms of areas of application.

The Hydro/ 3 is an extremely robust hydraulic diaphragm metering pump. It meets the most exacting safety requirements. Its modular construction offers extremely good flexibility in terms of application, for example in the oil and gas industry.

The Hydro/ 4 is an extremely robust hydraulic diaphragm metering pump, which meets the most exacting safety requirements – it is equipped as standard with a pressure relief valve and PTFE multi-layer diaphragm with diaphragm rupture warning system. Its modular construction offers extremely good flexibility in terms of applications.

The Orlita^® Evolution 1 meets the highest safety requirements as an extremely robust hydraulic diaphragm metering pump. It stands out, thanks to its PTFE multi-layer diaphragm with integral diaphragm rupture warning system and unique diaphragm position control. Its modular construction offers extremely good flexibility in terms of applications.

The Orlita^® Evolution 2 meets the highest safety requirements as an extremely robust hydraulic diaphragm metering pump. It stands out, thanks to its PTFE multi-layer diaphragm with integral diaphragm rupture warning system and unique diaphragm position control.

The Orlita^® Evolution 3 meets the highest safety requirements as an extremely robust hydraulic diaphragm metering pump. It stands out, thanks to its PTFE multi-layer diaphragm with integral diaphragm rupture warning system and unique diaphragm position control.

The Orlita^® Evolution 4 meets the highest safety requirements as an extremely robust hydraulic diaphragm metering pump. It stands out, thanks to its PTFE multi-layer diaphragm with integral diaphragm rupture warning system and unique diaphragm position control.

The hydraulic diaphragm metering pump Orlita^® MF offers reliable capacities even under high pressure and has a modular construction, therefore has versatile uses. Thanks to its modular design, this pump is tailored to meet your requirements even at very high pump capacities.

This emptying unit is used to accommodate and empty Big Bags weighing up to 1,000 kg. The Big Bags are suspended in the frame with the aid of a lifting cross bar. The 30-litre powder storage tank is used to transfer the powder into a feed unit.

Air-operated Diaphragm Pump Duodos for pumping liquid media.

The application range of the DULCO^®Trans depends on the chemical resistance of the materials used.

The solenoid-coupled centrifugal pump von Taine^® for the pumping of liquid media works safely and reliably: liquid media are pumped leak-free.

The diaphragm metering pump Makro/ 5 is used to meter reactants and catalysts in the chemical industry. Thanks to its modular construction, it can adapt outstandingly to the actual requirements of each application.

The modular construction of the diaphragm metering pump Makro TZ with adjustable eccentric drive mechanism and mechanically deflected multi-layer safety diaphragm makes it wonderfully adaptable to the capacity requirements of the respective application.

The eccentric screw pump Spectra meters liquid polyelectrolytes in concentrated and dilute form. It can be used, for example, in waste water treatment or sludge dewatering.

As an extremely robust hydraulic diaphragm metering pump, the Hydro/ 2 meets the most exacting safety requirements. Its modular construction, with either one or two dosing heads, 4 gear ratios, 2 dosing head sizes and 3 dosing head materials, offers a very high degree of flexibility in terms of areas of application.

The Hydro/ 3 is an extremely robust hydraulic diaphragm metering pump. It meets the most exacting safety requirements. Its modular construction offers extremely good flexibility in terms of application, for example in the oil and gas industry.

The Hydro/ 4 is an extremely robust hydraulic diaphragm metering pump, which meets the most exacting safety requirements – it is equipped as standard with a pressure relief valve and PTFE multi-layer diaphragm with diaphragm rupture warning system. Its modular construction offers extremely good flexibility in terms of applications.

The Orlita^® Evolution 1 meets the highest safety requirements as an extremely robust hydraulic diaphragm metering pump. It stands out, thanks to its PTFE multi-layer diaphragm with integral diaphragm rupture warning system and unique diaphragm position control. Its modular construction offers extremely good flexibility in terms of applications.

The Orlita^® Evolution 2 meets the highest safety requirements as an extremely robust hydraulic diaphragm metering pump. It stands out, thanks to its PTFE multi-layer diaphragm with integral diaphragm rupture warning system and unique diaphragm position control.

The Orlita^® Evolution 3 meets the highest safety requirements as an extremely robust hydraulic diaphragm metering pump. It stands out, thanks to its PTFE multi-layer diaphragm with integral diaphragm rupture warning system and unique diaphragm position control.

The Orlita^® Evolution 4 meets the highest safety requirements as an extremely robust hydraulic diaphragm metering pump. It stands out, thanks to its PTFE multi-layer diaphragm with integral diaphragm rupture warning system and unique diaphragm position control.

The hydraulic diaphragm metering pump Orlita^® MF offers reliable capacities even under high pressure and has a modular construction, therefore has versatile uses. Thanks to its modular design, this pump is tailored to meet your requirements even at very high pump capacities.

This emptying unit is used to accommodate and empty Big Bags weighing up to 1,000 kg. The Big Bags are suspended in the frame with the aid of a lifting cross bar. The 30-litre powder storage tank is used to transfer the powder into a feed unit.

Air-operated Diaphragm Pump Duodos for pumping liquid media.

The application range of the DULCO^®Trans depends on the chemical resistance of the materials used.

The solenoid-coupled centrifugal pump von Taine^® for the pumping of liquid media works safely and reliably: liquid media are pumped leak-free.

The diaphragm metering pump Makro/ 5 is used to meter reactants and catalysts in the chemical industry. Thanks to its modular construction, it can adapt outstandingly to the actual requirements of each application.

The modular construction of the diaphragm metering pump Makro TZ with adjustable eccentric drive mechanism and mechanically deflected multi-layer safety diaphragm makes it wonderfully adaptable to the capacity requirements of the respective application.

The eccentric screw pump Spectra meters liquid polyelectrolytes in concentrated and dilute form. It can be used, for example, in waste water treatment or sludge dewatering.

As an extremely robust hydraulic diaphragm metering pump, the Hydro/ 2 meets the most exacting safety requirements. Its modular construction, with either one or two dosing heads, 4 gear ratios, 2 dosing head sizes and 3 dosing head materials, offers a very high degree of flexibility in terms of areas of application.

The Hydro/ 3 is an extremely robust hydraulic diaphragm metering pump. It meets the most exacting safety requirements. Its modular construction offers extremely good flexibility in terms of application, for example in the oil and gas industry.

The Hydro/ 4 is an extremely robust hydraulic diaphragm metering pump, which meets the most exacting safety requirements – it is equipped as standard with a pressure relief valve and PTFE multi-layer diaphragm with diaphragm rupture warning system. Its modular construction offers extremely good flexibility in terms of applications.

The Orlita^® Evolution 1 meets the highest safety requirements as an extremely robust hydraulic diaphragm metering pump. It stands out, thanks to its PTFE multi-layer diaphragm with integral diaphragm rupture warning system and unique diaphragm position control. Its modular construction offers extremely good flexibility in terms of applications.

The Orlita^® Evolution 2 meets the highest safety requirements as an extremely robust hydraulic diaphragm metering pump. It stands out, thanks to its PTFE multi-layer diaphragm with integral diaphragm rupture warning system and unique diaphragm position control.

The Orlita^® Evolution 3 meets the highest safety requirements as an extremely robust hydraulic diaphragm metering pump. It stands out, thanks to its PTFE multi-layer diaphragm with integral diaphragm rupture warning system and unique diaphragm position control.

The Orlita^® Evolution 4 meets the highest safety requirements as an extremely robust hydraulic diaphragm metering pump. It stands out, thanks to its PTFE multi-layer diaphragm with integral diaphragm rupture warning system and unique diaphragm position control.

The hydraulic diaphragm metering pump Orlita^® MF offers reliable capacities even under high pressure and has a modular construction, therefore has versatile uses. Thanks to its modular design, this pump is tailored to meet your requirements even at very high pump capacities.

This emptying unit is used to accommodate and empty Big Bags weighing up to 1,000 kg. The Big Bags are suspended in the frame with the aid of a lifting cross bar. The 30-litre powder storage tank is used to transfer the powder into a feed unit.

The Flemish Ministry of Health only permits approved disinfectants and disinfection processes for protection against legionella. Chlorine dioxide systems Bello Zon® have been certified for this since the beginning of 2018.

Markus Rösch, Divisional Manager for Pool and Wellness at ProMinent Deutschland, provided this positive summing up on the last day of aquanale: “The huge interest shown over the last four days has far exceeded our expectations: “We welcomed many interested visitors and received very positive feedback on the new products we presented.

Ternary oxide systems containing lithium guarantee a high energy density, long service life and high number of charge cycles for lithium storage batteries. Metering systems ensure the quality of the precursors needed for production.

The Carolus Thermen in Aachen in Germany, named after king Charles the Great, are an unparalleled world of wellness. The demanding job of treating the thermal water is handled by our modern electrolysis system and the powerful measuring and control system.

Bacteria and cross-contamination set off all the alarm bells in food production! This article shows how manufacturers of poultry and salad products have used chlorine dioxide systems from ProMinent to efficiently overcome these problems.

Magnificent mountain panorama under cloudless blue skies – guests at the Spa Hotel Tanneck in Allgäu are treated to a pool landscape with precisely this view. Efficient systems from ProMinent ensure a continuous supply of water of incomparable quality.

At drinktec 2017 between 11 and 15 September 2017 in Munich, ProMinent will present its world first, the UV system Dulcodes LP, at stand 316 in hall B3. The system adapts its output according to flow and temperature, even when these parameters change rapidly. The UV system designed especially for use in the food and beverage industry satisfies hygienic design requirements, is CIP-compatible and is fitted with materials compliant with the FDA.

Standard disinfection processes produce chlorate concentrations far above the desired minimum limits. The alternative is DULCO®Lyse, which guarantees a chlorate level far below manufacturers' specifications. ProMinent presents its optimised diaphragm electrolysis process on stand 316 in hall B3 at drinktec 2017. The trade fair runs between 11 and 15 September 2017 in Munich.

ProMinent is presenting ready-wired metering stations DULCODOS® F&B on stand 316 in hall B3 at drinktec 2017, which runs between 11 and 15 September 2017. These metering systems have been specifically developed for the food and beverage sector and are used to meter cleaning agents, disinfectants and additives, as well as additives and auxiliary agents with ultimate precision. They correspond to the fields of application of Directive (EC) No. 1935/2004.

Are you looking for integral concepts or processes for sustainable water treatment? You will be spoilt for choice at ProMinent. True to the motto "Ready for you. Anytime, anywhere", innovative solutions for efficient water disinfection and hygienic production in breweries, the manufacture of soft drinks and the liquid food industry will be on display on stand 316 in hall B3.

The air contains dust which is constantly being swirled around. Then there's water. And high-pressure jets from all directions, for minutes at a time. Harsh conditions – but no problem for the gamma/ X, because it now offers IP 66 protection.

At the end of HANNOVER MESSE 2017, Peter Hitzler, Sales Manager (Industry) at ProMinent Deutschland GmbH, looks back on a successful event: "As part of the International PUMPENplatz stand, we came into contact with excellent leads in Germany and abroad. Our components and systems for the efficient, environmentally friendly and sustainable handling of liquid media met with great approval," he says.

The Flemish Ministry of Health only permits approved disinfectants and disinfection processes for protection against legionella. Chlorine dioxide systems Bello Zon® have been certified for this since the beginning of 2018.

Markus Rösch, Divisional Manager for Pool and Wellness at ProMinent Deutschland, provided this positive summing up on the last day of aquanale: “The huge interest shown over the last four days has far exceeded our expectations: “We welcomed many interested visitors and received very positive feedback on the new products we presented.

Ternary oxide systems containing lithium guarantee a high energy density, long service life and high number of charge cycles for lithium storage batteries. Metering systems ensure the quality of the precursors needed for production.

The Carolus Thermen in Aachen in Germany, named after king Charles the Great, are an unparalleled world of wellness. The demanding job of treating the thermal water is handled by our modern electrolysis system and the powerful measuring and control system.

Bacteria and cross-contamination set off all the alarm bells in food production! This article shows how manufacturers of poultry and salad products have used chlorine dioxide systems from ProMinent to efficiently overcome these problems.

Magnificent mountain panorama under cloudless blue skies – guests at the Spa Hotel Tanneck in Allgäu are treated to a pool landscape with precisely this view. Efficient systems from ProMinent ensure a continuous supply of water of incomparable quality.

At drinktec 2017 between 11 and 15 September 2017 in Munich, ProMinent will present its world first, the UV system Dulcodes LP, at stand 316 in hall B3. The system adapts its output according to flow and temperature, even when these parameters change rapidly. The UV system designed especially for use in the food and beverage industry satisfies hygienic design requirements, is CIP-compatible and is fitted with materials compliant with the FDA.

Standard disinfection processes produce chlorate concentrations far above the desired minimum limits. The alternative is DULCO®Lyse, which guarantees a chlorate level far below manufacturers' specifications. ProMinent presents its optimised diaphragm electrolysis process on stand 316 in hall B3 at drinktec 2017. The trade fair runs between 11 and 15 September 2017 in Munich.

ProMinent is presenting ready-wired metering stations DULCODOS® F&B on stand 316 in hall B3 at drinktec 2017, which runs between 11 and 15 September 2017. These metering systems have been specifically developed for the food and beverage sector and are used to meter cleaning agents, disinfectants and additives, as well as additives and auxiliary agents with ultimate precision. They correspond to the fields of application of Directive (EC) No. 1935/2004.

Are you looking for integral concepts or processes for sustainable water treatment? You will be spoilt for choice at ProMinent. True to the motto "Ready for you. Anytime, anywhere", innovative solutions for efficient water disinfection and hygienic production in breweries, the manufacture of soft drinks and the liquid food industry will be on display on stand 316 in hall B3.

The air contains dust which is constantly being swirled around. Then there's water. And high-pressure jets from all directions, for minutes at a time. Harsh conditions – but no problem for the gamma/ X, because it now offers IP 66 protection.

At the end of HANNOVER MESSE 2017, Peter Hitzler, Sales Manager (Industry) at ProMinent Deutschland GmbH, looks back on a successful event: "As part of the International PUMPENplatz stand, we came into contact with excellent leads in Germany and abroad. Our components and systems for the efficient, environmentally friendly and sustainable handling of liquid media met with great approval," he says.

The Flemish Ministry of Health only permits approved disinfectants and disinfection processes for protection against legionella. Chlorine dioxide systems Bello Zon® have been certified for this since the beginning of 2018.

Markus Rösch, Divisional Manager for Pool and Wellness at ProMinent Deutschland, provided this positive summing up on the last day of aquanale: “The huge interest shown over the last four days has far exceeded our expectations: “We welcomed many interested visitors and received very positive feedback on the new products we presented.

Ternary oxide systems containing lithium guarantee a high energy density, long service life and high number of charge cycles for lithium storage batteries. Metering systems ensure the quality of the precursors needed for production.

The Carolus Thermen in Aachen in Germany, named after king Charles the Great, are an unparalleled world of wellness. The demanding job of treating the thermal water is handled by our modern electrolysis system and the powerful measuring and control system.

Bacteria and cross-contamination set off all the alarm bells in food production! This article shows how manufacturers of poultry and salad products have used chlorine dioxide systems from ProMinent to efficiently overcome these problems.

Magnificent mountain panorama under cloudless blue skies – guests at the Spa Hotel Tanneck in Allgäu are treated to a pool landscape with precisely this view. Efficient systems from ProMinent ensure a continuous supply of water of incomparable quality.

At drinktec 2017 between 11 and 15 September 2017 in Munich, ProMinent will present its world first, the UV system Dulcodes LP, at stand 316 in hall B3. The system adapts its output according to flow and temperature, even when these parameters change rapidly. The UV system designed especially for use in the food and beverage industry satisfies hygienic design requirements, is CIP-compatible and is fitted with materials compliant with the FDA.

Standard disinfection processes produce chlorate concentrations far above the desired minimum limits. The alternative is DULCO®Lyse, which guarantees a chlorate level far below manufacturers' specifications. ProMinent presents its optimised diaphragm electrolysis process on stand 316 in hall B3 at drinktec 2017. The trade fair runs between 11 and 15 September 2017 in Munich.

ProMinent is presenting ready-wired metering stations DULCODOS® F&B on stand 316 in hall B3 at drinktec 2017, which runs between 11 and 15 September 2017. These metering systems have been specifically developed for the food and beverage sector and are used to meter cleaning agents, disinfectants and additives, as well as additives and auxiliary agents with ultimate precision. They correspond to the fields of application of Directive (EC) No. 1935/2004.

Are you looking for integral concepts or processes for sustainable water treatment? You will be spoilt for choice at ProMinent. True to the motto "Ready for you. Anytime, anywhere", innovative solutions for efficient water disinfection and hygienic production in breweries, the manufacture of soft drinks and the liquid food industry will be on display on stand 316 in hall B3.

The air contains dust which is constantly being swirled around. Then there's water. And high-pressure jets from all directions, for minutes at a time. Harsh conditions – but no problem for the gamma/ X, because it now offers IP 66 protection.

At the end of HANNOVER MESSE 2017, Peter Hitzler, Sales Manager (Industry) at ProMinent Deutschland GmbH, looks back on a successful event: "As part of the International PUMPENplatz stand, we came into contact with excellent leads in Germany and abroad. Our components and systems for the efficient, environmentally friendly and sustainable handling of liquid media met with great approval," he says.

The Flemish Ministry of Health only permits approved disinfectants and disinfection processes for protection against legionella. Chlorine dioxide systems Bello Zon® have been certified for this since the beginning of 2018.

Markus Rösch, Divisional Manager for Pool and Wellness at ProMinent Deutschland, provided this positive summing up on the last day of aquanale: “The huge interest shown over the last four days has far exceeded our expectations: “We welcomed many interested visitors and received very positive feedback on the new products we presented.

Ternary oxide systems containing lithium guarantee a high energy density, long service life and high number of charge cycles for lithium storage batteries. Metering systems ensure the quality of the precursors needed for production.

The Carolus Thermen in Aachen in Germany, named after king Charles the Great, are an unparalleled world of wellness. The demanding job of treating the thermal water is handled by our modern electrolysis system and the powerful measuring and control system.

Bacteria and cross-contamination set off all the alarm bells in food production! This article shows how manufacturers of poultry and salad products have used chlorine dioxide systems from ProMinent to efficiently overcome these problems.

Magnificent mountain panorama under cloudless blue skies – guests at the Spa Hotel Tanneck in Allgäu are treated to a pool landscape with precisely this view. Efficient systems from ProMinent ensure a continuous supply of water of incomparable quality.

At drinktec 2017 between 11 and 15 September 2017 in Munich, ProMinent will present its world first, the UV system Dulcodes LP, at stand 316 in hall B3. The system adapts its output according to flow and temperature, even when these parameters change rapidly. The UV system designed especially for use in the food and beverage industry satisfies hygienic design requirements, is CIP-compatible and is fitted with materials compliant with the FDA.

Standard disinfection processes produce chlorate concentrations far above the desired minimum limits. The alternative is DULCO®Lyse, which guarantees a chlorate level far below manufacturers' specifications. ProMinent presents its optimised diaphragm electrolysis process on stand 316 in hall B3 at drinktec 2017. The trade fair runs between 11 and 15 September 2017 in Munich.

ProMinent is presenting ready-wired metering stations DULCODOS® F&B on stand 316 in hall B3 at drinktec 2017, which runs between 11 and 15 September 2017. These metering systems have been specifically developed for the food and beverage sector and are used to meter cleaning agents, disinfectants and additives, as well as additives and auxiliary agents with ultimate precision. They correspond to the fields of application of Directive (EC) No. 1935/2004.

Are you looking for integral concepts or processes for sustainable water treatment? You will be spoilt for choice at ProMinent. True to the motto "Ready for you. Anytime, anywhere", innovative solutions for efficient water disinfection and hygienic production in breweries, the manufacture of soft drinks and the liquid food industry will be on display on stand 316 in hall B3.

The air contains dust which is constantly being swirled around. Then there's water. And high-pressure jets from all directions, for minutes at a time. Harsh conditions – but no problem for the gamma/ X, because it now offers IP 66 protection.

At the end of HANNOVER MESSE 2017, Peter Hitzler, Sales Manager (Industry) at ProMinent Deutschland GmbH, looks back on a successful event: "As part of the International PUMPENplatz stand, we came into contact with excellent leads in Germany and abroad. Our components and systems for the efficient, environmentally friendly and sustainable handling of liquid media met with great approval," he says.

The Flemish Ministry of Health only permits approved disinfectants and disinfection processes for protection against legionella. Chlorine dioxide systems Bello Zon® have been certified for this since the beginning of 2018.

Markus Rösch, Divisional Manager for Pool and Wellness at ProMinent Deutschland, provided this positive summing up on the last day of aquanale: “The huge interest shown over the last four days has far exceeded our expectations: “We welcomed many interested visitors and received very positive feedback on the new products we presented.

Ternary oxide systems containing lithium guarantee a high energy density, long service life and high number of charge cycles for lithium storage batteries. Metering systems ensure the quality of the precursors needed for production.

The Carolus Thermen in Aachen in Germany, named after king Charles the Great, are an unparalleled world of wellness. The demanding job of treating the thermal water is handled by our modern electrolysis system and the powerful measuring and control system.

Bacteria and cross-contamination set off all the alarm bells in food production! This article shows how manufacturers of poultry and salad products have used chlorine dioxide systems from ProMinent to efficiently overcome these problems.

Magnificent mountain panorama under cloudless blue skies – guests at the Spa Hotel Tanneck in Allgäu are treated to a pool landscape with precisely this view. Efficient systems from ProMinent ensure a continuous supply of water of incomparable quality.

At drinktec 2017 between 11 and 15 September 2017 in Munich, ProMinent will present its world first, the UV system Dulcodes LP, at stand 316 in hall B3. The system adapts its output according to flow and temperature, even when these parameters change rapidly. The UV system designed especially for use in the food and beverage industry satisfies hygienic design requirements, is CIP-compatible and is fitted with materials compliant with the FDA.

Standard disinfection processes produce chlorate concentrations far above the desired minimum limits. The alternative is DULCO®Lyse, which guarantees a chlorate level far below manufacturers' specifications. ProMinent presents its optimised diaphragm electrolysis process on stand 316 in hall B3 at drinktec 2017. The trade fair runs between 11 and 15 September 2017 in Munich.

ProMinent is presenting ready-wired metering stations DULCODOS® F&B on stand 316 in hall B3 at drinktec 2017, which runs between 11 and 15 September 2017. These metering systems have been specifically developed for the food and beverage sector and are used to meter cleaning agents, disinfectants and additives, as well as additives and auxiliary agents with ultimate precision. They correspond to the fields of application of Directive (EC) No. 1935/2004.

Are you looking for integral concepts or processes for sustainable water treatment? You will be spoilt for choice at ProMinent. True to the motto "Ready for you. Anytime, anywhere", innovative solutions for efficient water disinfection and hygienic production in breweries, the manufacture of soft drinks and the liquid food industry will be on display on stand 316 in hall B3.

The air contains dust which is constantly being swirled around. Then there's water. And high-pressure jets from all directions, for minutes at a time. Harsh conditions – but no problem for the gamma/ X, because it now offers IP 66 protection.

At the end of HANNOVER MESSE 2017, Peter Hitzler, Sales Manager (Industry) at ProMinent Deutschland GmbH, looks back on a successful event: "As part of the International PUMPENplatz stand, we came into contact with excellent leads in Germany and abroad. Our components and systems for the efficient, environmentally friendly and sustainable handling of liquid media met with great approval," he says.

The Flemish Ministry of Health only permits approved disinfectants and disinfection processes for protection against legionella. Chlorine dioxide systems Bello Zon® have been certified for this since the beginning of 2018.

Markus Rösch, Divisional Manager for Pool and Wellness at ProMinent Deutschland, provided this positive summing up on the last day of aquanale: “The huge interest shown over the last four days has far exceeded our expectations: “We welcomed many interested visitors and received very positive feedback on the new products we presented.

Ternary oxide systems containing lithium guarantee a high energy density, long service life and high number of charge cycles for lithium storage batteries. Metering systems ensure the quality of the precursors needed for production.

The Carolus Thermen in Aachen in Germany, named after king Charles the Great, are an unparalleled world of wellness. The demanding job of treating the thermal water is handled by our modern electrolysis system and the powerful measuring and control system.

Bacteria and cross-contamination set off all the alarm bells in food production! This article shows how manufacturers of poultry and salad products have used chlorine dioxide systems from ProMinent to efficiently overcome these problems.

Magnificent mountain panorama under cloudless blue skies – guests at the Spa Hotel Tanneck in Allgäu are treated to a pool landscape with precisely this view. Efficient systems from ProMinent ensure a continuous supply of water of incomparable quality.

At drinktec 2017 between 11 and 15 September 2017 in Munich, ProMinent will present its world first, the UV system Dulcodes LP, at stand 316 in hall B3. The system adapts its output according to flow and temperature, even when these parameters change rapidly. The UV system designed especially for use in the food and beverage industry satisfies hygienic design requirements, is CIP-compatible and is fitted with materials compliant with the FDA.

Standard disinfection processes produce chlorate concentrations far above the desired minimum limits. The alternative is DULCO®Lyse, which guarantees a chlorate level far below manufacturers' specifications. ProMinent presents its optimised diaphragm electrolysis process on stand 316 in hall B3 at drinktec 2017. The trade fair runs between 11 and 15 September 2017 in Munich.

ProMinent is presenting ready-wired metering stations DULCODOS® F&B on stand 316 in hall B3 at drinktec 2017, which runs between 11 and 15 September 2017. These metering systems have been specifically developed for the food and beverage sector and are used to meter cleaning agents, disinfectants and additives, as well as additives and auxiliary agents with ultimate precision. They correspond to the fields of application of Directive (EC) No. 1935/2004.

Are you looking for integral concepts or processes for sustainable water treatment? You will be spoilt for choice at ProMinent. True to the motto "Ready for you. Anytime, anywhere", innovative solutions for efficient water disinfection and hygienic production in breweries, the manufacture of soft drinks and the liquid food industry will be on display on stand 316 in hall B3.

The air contains dust which is constantly being swirled around. Then there's water. And high-pressure jets from all directions, for minutes at a time. Harsh conditions – but no problem for the gamma/ X, because it now offers IP 66 protection.

At the end of HANNOVER MESSE 2017, Peter Hitzler, Sales Manager (Industry) at ProMinent Deutschland GmbH, looks back on a successful event: "As part of the International PUMPENplatz stand, we came into contact with excellent leads in Germany and abroad. Our components and systems for the efficient, environmentally friendly and sustainable handling of liquid media met with great approval," he says.