Electroplating

The motor-driven metering pump alpha is the metering pump for liquid media and the optimum solution for simple applications. Robust, low-noise, chemical-resistant, with precise metering and good suction capacity.

All-purpose solenoid-driven metering pump for metering liquid media in water treatment and chemical processes: Solenoid-driven metering pump Beta^®. Cost-effective, overload-proof, adaptable to existing signal transducers.

The solenoid-driven diaphragm metering pump gamma incorporates a wealth of eXcellent ingenuity! With integrated pressure measurement, it ensures the smooth running of your metering process. The gamma/ X is ideal for all metering work involving liquid media.

The gamma/ XL is a smart, connectible solenoid-driven metering pump that is setting new standards in terms of productivity, reliability and cost-effectiveness.

The solenoid-coupled centrifugal pump von Taine^® for the pumping of liquid media works safely and reliably: liquid media are pumped leak-free.

Air-operated Diaphragm Pump Duodos for pumping liquid media.

The flow meter DulcoFlow^® reliably measures pulsating flows in the range above 0.03 ml/stroke based on the ultrasound measuring principle. The flow meter achieves maximum chemical resistance, as all wetted parts are made of PVDF and PTFE.

The motor-driven metering pump Vario C delivers a high level of process quality for continuous metering within simple metering tasks. It can be used, for example, in the metering of additives or flocculants in chemical metering.

The Sigma/ 1 Basic is an extremely robust motor-driven metering pump with patented multi-layer safety diaphragm for excellent process reliability. It offers a wide range of power end designs, such as three-phase or 1-phase AC motors, also for use in areas at risk from explosion.

Robust motor-driven metering pumps like the Sigma/ 2 Basic guarantee excellent process reliability with their patented multi-layer safety diaphragm. The diaphragm metering pump offers a number of power end versions, also suitable for use in areas at risk from explosion.

The patented multi-layer safety diaphragm for excellent process reliability is just one feature of the extremely robust motor-driven metering pump Sigma/3 Basic. It also offers a wide range of power end versions, such as three-phase or 1-phase AC motors, also for use in ATEX areas.

The Sigma control type is a smart motor-driven metering pump that is setting new standards in terms of productivity, reliability and safety.

The Sigma control type is a smart motor-driven metering pump that is setting new standards in terms of productivity, reliability and safety.

The Sigma control type is a smart motor-driven metering pump that is setting new standards in terms of productivity, reliability and safety.

PE storage tanks produced in a rotation process. ProMinent metering pumps, suction lances and stirrers can all be added. The stackable PE collecting pans are available in matching sizes.

Our plastic storage tanks guarantee compliance with statutory specifications taking into account country-specific approvals, which regulate the production and operation of systems for storage and metering or environmentally-hazardous substances.

For storing and metering liquid chemicals Use a selection guide (identity code) to quickly and flexibly adapt your metering system to your metering task.

The controller DULCOMETER^® D1Cb/D1Cc can be used for control tasks in potable water treatment, waste water treatment and many other areas. Safe, convenient and clear, thanks to the large illuminated graphic display, plain text operating menu and pH sensor monitoring.

As a controller in water analysis, the DULCOMETER^® Compact is the correct controller for control tasks that require only a 1 way control.

Conductivity sensors for optimum process integration: DULCOTEST^® sensors meet a wide range of measuring requirements and allow the best solution to any given measuring task to be achieved.

Accurate measurement of fluoride with DULCOTEST^® sensors in the monitoring of potable water and waste water, suitable for pH values up to 9.5.

ORP measurements with DULCOTEST^® sensors: Precise, reliable and application-adapted measured values in real time. Can be used in water treatment or industrial process waters with strict requirements.

pH measurements with DULCOTEST^® sensors: Precise, reliable and application-adapted measured values in real time. Control, regulate and monitor chemical processes with the aid of precise measured values.

Temperature measurement with DULCOTEST^® sensors: Can be used for direct temperature measurement or temperature compensation during measurement of pH, fluoride, conductivity, chlorine dioxide or hydrogen peroxide.

Monitoring and treatment of waste water with DULCOTROL^® Waste Water – the compact measuring and control system specially designed for applications in municipal and industrial waste water treatment.

pH and ORP measurement with Portamess^® pH/ORP - battery-powered, hand-held meter with automatic or manual temperature compensation.

The measuring instrument Portamess^® conductivity is a robust, leak-tight and battery-operated hand-held measuring instrument with a large measuring range and automatic or manual temperature compensation, which can be used in the industrial, environmental, food and waste water sectors.

In the fight against the corona virus, researchers are working against time: a vaccine must be developed, tested and approved as quickly as possible. For this reason, one of the world's largest service providers for medical research contacted ProMinent to optimise special metering tasks.

The effective disinfection of surfaces plays the central role in the containment of the corona virus. With our electrolysis systems, the highly effective disinfectant can be produced directly on site. The North Italian civil defence is already benefiting from this.

To combat the spread of the coronavirus in the Chinese city of Wuhan, several temporary hospitals were built in a very short time. ProMinent China donated two chlorine dioxide systems for water treatment for one of them.

At aquanale 2019, ProMinent's stand showed how swimming pool operators can ensure clear, pure swimming pool water with energy-saving and environmentally-sound solutions. “All in all, a successful, international exhibition. We are very happy!" said Harald Jarc, Managing Director of ProMinent Deutschland GmbH, of aquanale in Cologne, which attracted a large number of visitors. He added: "At this year's trade fair, we entered into a lot of quality discussions with existing and potential customers from Germany and abroad. On the first day of the event, a lot of people were drawn to our stand by the presence of Sarah Köhler, World Champion in the 1500 m freestyle. The friendly swimmer from Heidelberg signed give-aways and chatted to existing customers and potential customers about water quality and how it impacts on performance, success and health.”

BrauBeviale 2019 was best summed up by Andrea Kalrait, who manages the event: “Fantastic atmosphere at the Nuremberg Exhibition Centre: numerous new contacts from home and abroad, initial business contacts and closing of deals: plenty of good food and drink”. This was confirmed by Robert Günther, Divisional Manager for Food & Beverage / Potable Water at ProMinent Deutschland GmbH who added: “Our products ensure that the food and beverage industry is always playing it safe. Our products allow food and drink to be produced, brewed and bottled hygienically.”

As sponsor of the swimming talent Sarah Köhler we congratulate her and the German Open Water Relay on the gold medal!

Strong outgassing, highly viscous, abrasive, shear sensitive or chemically aggressive? Fluids that place high demands on pumps.

On May 2, 2019 ProMinent carry out the opening of its new facilities in Mexico located at the north of Queretaro City.

After the five-day trade fair, Deutsche Messe AG concluded that everything had gone very well. Dr. Jochen Köckler, Chair of the Board at Deutsche Messe AG, said that “Hannover Messe 2019 has demonstrated that it is the most important platform internationally for all technologies associated with industrial transformation”. Torsten Silkenbeumer, Key Account Manager for Process Technology at ProMinent, confirmed that the event had been a success from ProMinent’s standpoint too: "Our involvement in the Pump Plaza produced numerous leads in Germany and abroad. Alongside our metering and process pumps, visitors were especially interested in our web-based solutions for digital fluid management.”