Suggestions

Oil and Gas Industry

"Made in Germany" for the global oil and gas industry

ProMinent's tailored products are made in Germany. Designed as complete solutions and manufactured in-house, they are quickly ready for use (up-, mid- and downstream).

Requirements - Oil and Gas Industry

 

Making sure everything runs smoothly

We individually manufacture each of our metering pumps and systems, drawing on the wealth of experience we have gained over the decades. This is what makes ProMinent products so efficient. No matter whether our systems are used in isolation or locally, for complex or explosion-proof tasks, they all offer process reliability tested to European and international standards.

ProMinent metering applications keep the oil and gas flowing because they reliably prevent corrosion and deposits in the pipes or improve the flow characteristics of the oil. Their priceless assistance is very much in demand. ProMinent metering pumps feed chemicals such as inhibitors, additives and catalysts wherever they are needed – keeping them strictly separated at all times. One pump can drive several pump heads and meter various chemicals or one and the same feed chemical to various points in the process. After all, production safety is essential.

Tests prove efficiency

The environmental compatibility and production safety of our pumps is very important to us. So we test them thoroughly: in Heidelberg ProMinent undertakes extensive performance and pressure tests on its process metering pumps, including API 675 testing. All parameters are monitored, analysed and documented. But our work starts well in advance of production: we document the quotations and plans with great care and produce extensive computer-assisted calculations and designs. We also make it easy for our customers to use our pumps: they are simple to operate and incorporate into standard process control systems.

Wind, water or wilderness? We're there for you!

Inhospitable surroundings? Tough climate? This is where our robust products get to show what they are made of. Designed to be tough and virtually wear-free, they meter and transport flammable, toxic, highly viscous fluids or those laden with solids, even at very high pressure levels (up to 3,000 bar). All components can be used both onshore and offshore. This makes them so versatile they are suitable for everything from the oil fields of Kuwait and Kazakhstan to floating drilling platforms off the Norwegian coast. ProMinent metering systems are manufactured in line with international standards (MD, PED, API, ASME, Atex or NEC) and installed and maintained at your premises. With branches in more than 100 countries, there will always be a ProMinent service partner close by.

Downloads for Oil and Gas Industry

More in the Download Centre

0 Results
Filter by document type
Application Example / Reference (0)
Brochure / Flyer (0)
Catalogue (0)
Certificate / Declaration (0)
Data Sheet (0)
Drawing / Dimensional Drawing / 3D (0)
Exploded View / Spare Parts (0)
Material Safety Data Sheet (0)
Operating Instructions (0)
Others (0)
Press Release (0)
Publication / Article (0)
Software (0)
Wiring Diagram (0)

Selected filters:

Matching downloads

Sort by Document type
Load more matches ...
No more matches available!

Unfortunately, we did not find an appropriate match.

All words written correctly?
Search again with fewer or different search terms?

Please try again later

Service Unavailable

The server is temporarily unable to service your request due to maintenance downtime or capacity problems. Please try again later.

Overview

 

Making sure everything runs smoothly

We individually manufacture each of our metering pumps and systems, drawing on the wealth of experience we have gained over the decades. This is what makes ProMinent products so efficient. No matter whether our systems are used in isolation or locally, for complex or explosion-proof tasks, they all offer process reliability tested to European and international standards.

ProMinent metering applications keep the oil and gas flowing because they reliably prevent corrosion and deposits in the pipes or improve the flow characteristics of the oil. Their priceless assistance is very much in demand. ProMinent metering pumps feed chemicals such as inhibitors, additives and catalysts wherever they are needed – keeping them strictly separated at all times. One pump can drive several pump heads and meter various chemicals or one and the same feed chemical to various points in the process. After all, production safety is essential.

Tests prove efficiency

The environmental compatibility and production safety of our pumps is very important to us. So we test them thoroughly: in Heidelberg ProMinent undertakes extensive performance and pressure tests on its process metering pumps, including API 675 testing. All parameters are monitored, analysed and documented. But our work starts well in advance of production: we document the quotations and plans with great care and produce extensive computer-assisted calculations and designs. We also make it easy for our customers to use our pumps: they are simple to operate and incorporate into standard process control systems.

Wind, water or wilderness? We're there for you!

Inhospitable surroundings? Tough climate? This is where our robust products get to show what they are made of. Designed to be tough and virtually wear-free, they meter and transport flammable, toxic, highly viscous fluids or those laden with solids, even at very high pressure levels (up to 3,000 bar). All components can be used both onshore and offshore. This makes them so versatile they are suitable for everything from the oil fields of Kuwait and Kazakhstan to floating drilling platforms off the Norwegian coast. ProMinent metering systems are manufactured in line with international standards (MD, PED, API, ASME, Atex or NEC) and installed and maintained at your premises. With branches in more than 100 countries, there will always be a ProMinent service partner close by.

Downloads

Suitable products - Oil and Gas Industry

The diaphragm metering pump EXTRONIC is perfectly suited to the sensitive application of liquid media in facilities at risk of gas explosions as it is approved in compliance with the EU EX Regulation 2014/34/EU (ATEX).

more

As an extremely robust hydraulic diaphragm metering pump, the HYDRO range meets the most exacting safety requirements. Its modular construction, with either one or two dosing heads, 4 gear ratios, 2 dosing head sizes and 3 dosing head materials, offers a very high degree of flexibility in terms of areas of application.

more

The robust hydraulic diaphragm metering pump Makro/ 5 guarantees outstanding process reliability. Its modular construction offers extremely good flexibility and a large range of drive versions are available.

more

The hydraulic diaphragm metering pump ORLITA MF offers reliable dosing rates even under high pressure and has a modular construction, making it highly versatile. Thanks to its modular design, this pump is tailored to meet your requirements even at very high pump capacities.

more

The ORLITA Evolution meets the most exacting safety requirements as an extremely robust hydraulic diaphragm metering pump. It is characterised by its PTFE multi-layer diaphragm with integral diaphragm rupture warning/signalling and unique diaphragm position control.

more

The ORLITA Evolution mikro is an innovative micro-metering pump for high pressures. The hydraulic diaphragm metering pump is the first of its kind with an electronically regulated linear direct power end. The power end has few mechanical functional elements and thus operates with virtually minimal maintenance.

more

The diaphragm metering pump ORLITA MH has a robust metal diaphragm. This permits precise pump capacities even at very high pressure. The ORLITA MH has a modular construction and is therefore very versatile. For example, a range of drive versions is available and drives and dosing heads can be freely combined.

more

The metal diaphragm metering pumps ORLITA MHHP are special pumps, which provide precise pump capacities even at maximum pressures of up to 3000 bar.

more

The plunger metering pump Sigma SBKa is an extremely robust plunger metering pump with high-performance plunger and the option to adjust the pump capacity in 0.2% increments. It offers a wide range of power end versions, such as three-phase or 1-phase AC motors, even for Exe and Exde areas with ATEX certification.

more

The plunger metering pump Makro TZ impresses with its excellent process reliability, outstanding flexibility and its modular construction enables it to be outstandingly adapted to the performance requirements of the respective application.

more

The plunger metering pump Makro/ 5 can virtually be used throughout the low-pressure range and its modular construction enables it to be outstandingly adapted to the performance requirements of the respective application.

more

The high-performance plunger metering pump ORLITA PS enables precise pump capacities even at maximum pressure and temperatures of up to +400 °C. The ORLITA PS pump has a modular construction and is therefore very flexible.

more

The plunger metering pump ORLITA DR does not need valves and can therefore be operated within a broad stroke rate range. It is therefore suitable for use with high-viscosity and extremely high-viscosity media of up to 106 mPas within a wide temperature range of -40 °C to 400 °C.

more

The HYDRO API 675 is an extremely robust hydraulic diaphragm metering pump, which meets the most exacting safety requirements and is designed in accordance with API 675. This is ensured by the PTFE multi-layer diaphragm with diaphragm monitoring, the full-motion drive and automatic bleeding, for example. Its modular construction makes it extremely versatile.

more

As an extremely robust hydraulic diaphragm metering pump, the ORLITA Evolution E1Sa/E2Sa meets the most exacting safety requirements. It is characterised by its PTFE multi-layer diaphragm with integral diaphragm rupture warning / signalling system and unique diaphragm position control.

more

Contact us

»Please send us your request! We will contact you shortly.«

+49 6221 842 0  Send request   

News and Events