The chlorine gas metering system DULCO^®Vaq type PM 3610 C for automatically controlled metering of chlorine gas. Its simple operation offers safety and precision in accordance with the current state of technology and in line with DIN standards.

Chlorine dioxide system, which continuously produces ClO₂ according to the acid/chlorite method with diluted chemicals. Extremely simple operation, clear construction, analogue control, manual control or via contacts.

Chlorine dioxide system for continuous production, metering and monitoring of chlorine dioxide with concentrated chemicals. Bello Zon^® CDKc is a ready-to-use convenient system with integrated intrinsically safe pre-dilution station.

Chlorine dioxide system for production of a chlorine-free chlorine dioxide solution, especially suitable for multiple points of injection. Bello Zon^® CDLb produces ClO₂ discontinuously using the acid/chlorite process with diluted chemicals.

Chlorine dioxide system for monitoring and metering chlorine dioxide and diluted chemicals. Maximum output and safety due to special reactor concept. Bello Zon^® CDVc can be easily and safely integrated into any water treatment process.

Controller AEGIS II continuously measures and controls the conductivity and biocide concentration to keep pipework and heat exchangers clean.

PE storage tanks produced in a rotation process. ProMinent metering pumps, suction lances and stirrers can all be added. The stackable PE collecting pans are available in matching sizes.

ORP measurements with DULCOTEST^® sensors: Precise, reliable and application-adapted measured values in real time. Can be used in water treatment or industrial process waters with strict requirements.

pH measurements with DULCOTEST^® sensors: Precise, reliable and application-adapted measured values in real time. Control, regulate and monitor chemical processes with the aid of precise measured values.

Accurate measurement of fluoride with DULCOTEST^® sensors in the monitoring of potable water and waste water, suitable for pH values up to 9.5.

Bromine measurement with DULCOTEST^® sensors: Safe metering in disinfection processes with bromine. The robustness of the sensors makes them suitable for wide range of water qualities.

Chlorine dioxide measurement with DULCOTEST^® sensors offers precise, reliable, application-specific measured values in real time for all oxidation and disinfection tasks.

The application-based DULCOTEST^® sensors for free chlorine deliver precise measured values and a high degree of monitoring and process reliability in any disinfection application.

Disinfection of swimming pool water with the application-optimised DULCOTEST^® sensors for total available chlorine - exact measured values and high process reliability guaranteed.

Reliably measure total chlorine with the versatile DULCOTEST^® sensors for total chlorine. Accurate measured values and a high degree of monitoring and process reliability are guaranteed.

Temperature measurement with DULCOTEST^® sensors: Can be used for direct temperature measurement or temperature compensation during measurement of pH, fluoride, conductivity, chlorine dioxide or hydrogen peroxide.

The flow meter DulcoFlow^® reliably measures pulsating flows in the range above 0.03 ml/stroke based on the ultrasound measuring principle. The flow meter achieves maximum chemical resistance, as all wetted parts are made of PVDF and PTFE.

Injectors for chlorine gas, series DULCO^®Vaq, generate a stable vacuum even at high operating pressures.

The ready-wired modular metering system DULCODOS^® is used for the ultra-precise metering of chemicals. It has a modular design and can be flexibly integrated into the most varied applications.

Polymer batching station Ultromat^® ULFa (continuous flow system): This metering system can be used to batch flocculation aids for the preparation of a ready-to-use polymer solution. The system was designed for the fully automatic batching of polymer solutions.

The motorised control valve for chlorine gas DULCO^®Vaq type PM 3531 ensures precise electronically controlled metering of the chlorine gas flow. The linear control characteristic is guaranteed by an externally controlled step motor.

OZONFILT^® OZMa represents maximum operational safety with minimal operating costs. The ozone generator is maintenance-free and generates up to 735 g/h of ozone from compressed air or oxygen.

Photometers measure nearly all disinfectants and the pH value based on the photometric principle. They are portable, compact and make safe, simple measurement possible.

The measuring instrument Portamess^® conductivity is a robust, leak-tight and battery-operated hand-held measuring instrument with a large measuring range and automatic or manual temperature compensation, which can be used in the industrial, environmental, food and waste water sectors.

pH and ORP measurement with Portamess^® pH/ORP - battery-powered, hand-held meter with automatic or manual temperature compensation.

Our plastic storage tanks guarantee compliance with statutory specifications taking into account country-specific approvals, which regulate the production and operation of systems for storage and metering or environmentally-hazardous substances.

The vacuum dosing regulator DULCO^®Vaq CGVa meters chlorine gas cost-effectively and highly efficiently. Maximum possible operating safety and reliability is ensured by the use of high-quality materials, such as tantalum and silver.

Vacuum switches DULCO^®Vaq PM 400 and 440 automatically and reliably switch between two chlorine gas storage tanks. They therefore ensure an uninterrupted chlorine gas supply, even if a chlorine gas storage tank becomes empty.

The chlorine gas metering system DULCO^®Vaq type PM 3610 C for automatically controlled metering of chlorine gas. Its simple operation offers safety and precision in accordance with the current state of technology and in line with DIN standards.

Chlorine dioxide system, which continuously produces ClO₂ according to the acid/chlorite method with diluted chemicals. Extremely simple operation, clear construction, analogue control, manual control or via contacts.

Chlorine dioxide system for continuous production, metering and monitoring of chlorine dioxide with concentrated chemicals. Bello Zon^® CDKc is a ready-to-use convenient system with integrated intrinsically safe pre-dilution station.

Chlorine dioxide system for production of a chlorine-free chlorine dioxide solution, especially suitable for multiple points of injection. Bello Zon^® CDLb produces ClO₂ discontinuously using the acid/chlorite process with diluted chemicals.

Chlorine dioxide system for monitoring and metering chlorine dioxide and diluted chemicals. Maximum output and safety due to special reactor concept. Bello Zon^® CDVc can be easily and safely integrated into any water treatment process.

Controller AEGIS II continuously measures and controls the conductivity and biocide concentration to keep pipework and heat exchangers clean.

PE storage tanks produced in a rotation process. ProMinent metering pumps, suction lances and stirrers can all be added. The stackable PE collecting pans are available in matching sizes.

ORP measurements with DULCOTEST^® sensors: Precise, reliable and application-adapted measured values in real time. Can be used in water treatment or industrial process waters with strict requirements.

pH measurements with DULCOTEST^® sensors: Precise, reliable and application-adapted measured values in real time. Control, regulate and monitor chemical processes with the aid of precise measured values.

Accurate measurement of fluoride with DULCOTEST^® sensors in the monitoring of potable water and waste water, suitable for pH values up to 9.5.

Bromine measurement with DULCOTEST^® sensors: Safe metering in disinfection processes with bromine. The robustness of the sensors makes them suitable for wide range of water qualities.

Chlorine dioxide measurement with DULCOTEST^® sensors offers precise, reliable, application-specific measured values in real time for all oxidation and disinfection tasks.

The application-based DULCOTEST^® sensors for free chlorine deliver precise measured values and a high degree of monitoring and process reliability in any disinfection application.

Disinfection of swimming pool water with the application-optimised DULCOTEST^® sensors for total available chlorine - exact measured values and high process reliability guaranteed.

Reliably measure total chlorine with the versatile DULCOTEST^® sensors for total chlorine. Accurate measured values and a high degree of monitoring and process reliability are guaranteed.

Temperature measurement with DULCOTEST^® sensors: Can be used for direct temperature measurement or temperature compensation during measurement of pH, fluoride, conductivity, chlorine dioxide or hydrogen peroxide.

The flow meter DulcoFlow^® reliably measures pulsating flows in the range above 0.03 ml/stroke based on the ultrasound measuring principle. The flow meter achieves maximum chemical resistance, as all wetted parts are made of PVDF and PTFE.

Injectors for chlorine gas, series DULCO^®Vaq, generate a stable vacuum even at high operating pressures.

The ready-wired modular metering system DULCODOS^® is used for the ultra-precise metering of chemicals. It has a modular design and can be flexibly integrated into the most varied applications.

Polymer batching station Ultromat^® ULFa (continuous flow system): This metering system can be used to batch flocculation aids for the preparation of a ready-to-use polymer solution. The system was designed for the fully automatic batching of polymer solutions.

The motorised control valve for chlorine gas DULCO^®Vaq type PM 3531 ensures precise electronically controlled metering of the chlorine gas flow. The linear control characteristic is guaranteed by an externally controlled step motor.

OZONFILT^® OZMa represents maximum operational safety with minimal operating costs. The ozone generator is maintenance-free and generates up to 735 g/h of ozone from compressed air or oxygen.

Photometers measure nearly all disinfectants and the pH value based on the photometric principle. They are portable, compact and make safe, simple measurement possible.

The measuring instrument Portamess^® conductivity is a robust, leak-tight and battery-operated hand-held measuring instrument with a large measuring range and automatic or manual temperature compensation, which can be used in the industrial, environmental, food and waste water sectors.

pH and ORP measurement with Portamess^® pH/ORP - battery-powered, hand-held meter with automatic or manual temperature compensation.

Our plastic storage tanks guarantee compliance with statutory specifications taking into account country-specific approvals, which regulate the production and operation of systems for storage and metering or environmentally-hazardous substances.

The vacuum dosing regulator DULCO^®Vaq CGVa meters chlorine gas cost-effectively and highly efficiently. Maximum possible operating safety and reliability is ensured by the use of high-quality materials, such as tantalum and silver.

Vacuum switches DULCO^®Vaq PM 400 and 440 automatically and reliably switch between two chlorine gas storage tanks. They therefore ensure an uninterrupted chlorine gas supply, even if a chlorine gas storage tank becomes empty.

The chlorine gas metering system DULCO^®Vaq type PM 3610 C for automatically controlled metering of chlorine gas. Its simple operation offers safety and precision in accordance with the current state of technology and in line with DIN standards.

Chlorine dioxide system, which continuously produces ClO₂ according to the acid/chlorite method with diluted chemicals. Extremely simple operation, clear construction, analogue control, manual control or via contacts.

Chlorine dioxide system for continuous production, metering and monitoring of chlorine dioxide with concentrated chemicals. Bello Zon^® CDKc is a ready-to-use convenient system with integrated intrinsically safe pre-dilution station.

Chlorine dioxide system for production of a chlorine-free chlorine dioxide solution, especially suitable for multiple points of injection. Bello Zon^® CDLb produces ClO₂ discontinuously using the acid/chlorite process with diluted chemicals.

Chlorine dioxide system for monitoring and metering chlorine dioxide and diluted chemicals. Maximum output and safety due to special reactor concept. Bello Zon^® CDVc can be easily and safely integrated into any water treatment process.

Controller AEGIS II continuously measures and controls the conductivity and biocide concentration to keep pipework and heat exchangers clean.

PE storage tanks produced in a rotation process. ProMinent metering pumps, suction lances and stirrers can all be added. The stackable PE collecting pans are available in matching sizes.

ORP measurements with DULCOTEST^® sensors: Precise, reliable and application-adapted measured values in real time. Can be used in water treatment or industrial process waters with strict requirements.

pH measurements with DULCOTEST^® sensors: Precise, reliable and application-adapted measured values in real time. Control, regulate and monitor chemical processes with the aid of precise measured values.

Accurate measurement of fluoride with DULCOTEST^® sensors in the monitoring of potable water and waste water, suitable for pH values up to 9.5.

Bromine measurement with DULCOTEST^® sensors: Safe metering in disinfection processes with bromine. The robustness of the sensors makes them suitable for wide range of water qualities.

Chlorine dioxide measurement with DULCOTEST^® sensors offers precise, reliable, application-specific measured values in real time for all oxidation and disinfection tasks.

The application-based DULCOTEST^® sensors for free chlorine deliver precise measured values and a high degree of monitoring and process reliability in any disinfection application.

Disinfection of swimming pool water with the application-optimised DULCOTEST^® sensors for total available chlorine - exact measured values and high process reliability guaranteed.

Reliably measure total chlorine with the versatile DULCOTEST^® sensors for total chlorine. Accurate measured values and a high degree of monitoring and process reliability are guaranteed.

Temperature measurement with DULCOTEST^® sensors: Can be used for direct temperature measurement or temperature compensation during measurement of pH, fluoride, conductivity, chlorine dioxide or hydrogen peroxide.

The flow meter DulcoFlow^® reliably measures pulsating flows in the range above 0.03 ml/stroke based on the ultrasound measuring principle. The flow meter achieves maximum chemical resistance, as all wetted parts are made of PVDF and PTFE.

Injectors for chlorine gas, series DULCO^®Vaq, generate a stable vacuum even at high operating pressures.

The ready-wired modular metering system DULCODOS^® is used for the ultra-precise metering of chemicals. It has a modular design and can be flexibly integrated into the most varied applications.

Polymer batching station Ultromat^® ULFa (continuous flow system): This metering system can be used to batch flocculation aids for the preparation of a ready-to-use polymer solution. The system was designed for the fully automatic batching of polymer solutions.

The motorised control valve for chlorine gas DULCO^®Vaq type PM 3531 ensures precise electronically controlled metering of the chlorine gas flow. The linear control characteristic is guaranteed by an externally controlled step motor.

OZONFILT^® OZMa represents maximum operational safety with minimal operating costs. The ozone generator is maintenance-free and generates up to 735 g/h of ozone from compressed air or oxygen.

Photometers measure nearly all disinfectants and the pH value based on the photometric principle. They are portable, compact and make safe, simple measurement possible.

The measuring instrument Portamess^® conductivity is a robust, leak-tight and battery-operated hand-held measuring instrument with a large measuring range and automatic or manual temperature compensation, which can be used in the industrial, environmental, food and waste water sectors.

pH and ORP measurement with Portamess^® pH/ORP - battery-powered, hand-held meter with automatic or manual temperature compensation.

Our plastic storage tanks guarantee compliance with statutory specifications taking into account country-specific approvals, which regulate the production and operation of systems for storage and metering or environmentally-hazardous substances.

The vacuum dosing regulator DULCO^®Vaq CGVa meters chlorine gas cost-effectively and highly efficiently. Maximum possible operating safety and reliability is ensured by the use of high-quality materials, such as tantalum and silver.

Vacuum switches DULCO^®Vaq PM 400 and 440 automatically and reliably switch between two chlorine gas storage tanks. They therefore ensure an uninterrupted chlorine gas supply, even if a chlorine gas storage tank becomes empty.

The chlorine gas metering system DULCO^®Vaq type PM 3610 C for automatically controlled metering of chlorine gas. Its simple operation offers safety and precision in accordance with the current state of technology and in line with DIN standards.

Chlorine dioxide system, which continuously produces ClO₂ according to the acid/chlorite method with diluted chemicals. Extremely simple operation, clear construction, analogue control, manual control or via contacts.

Chlorine dioxide system for continuous production, metering and monitoring of chlorine dioxide with concentrated chemicals. Bello Zon^® CDKc is a ready-to-use convenient system with integrated intrinsically safe pre-dilution station.

Chlorine dioxide system for production of a chlorine-free chlorine dioxide solution, especially suitable for multiple points of injection. Bello Zon^® CDLb produces ClO₂ discontinuously using the acid/chlorite process with diluted chemicals.

Chlorine dioxide system for monitoring and metering chlorine dioxide and diluted chemicals. Maximum output and safety due to special reactor concept. Bello Zon^® CDVc can be easily and safely integrated into any water treatment process.

Controller AEGIS II continuously measures and controls the conductivity and biocide concentration to keep pipework and heat exchangers clean.

PE storage tanks produced in a rotation process. ProMinent metering pumps, suction lances and stirrers can all be added. The stackable PE collecting pans are available in matching sizes.

ORP measurements with DULCOTEST^® sensors: Precise, reliable and application-adapted measured values in real time. Can be used in water treatment or industrial process waters with strict requirements.

pH measurements with DULCOTEST^® sensors: Precise, reliable and application-adapted measured values in real time. Control, regulate and monitor chemical processes with the aid of precise measured values.

Accurate measurement of fluoride with DULCOTEST^® sensors in the monitoring of potable water and waste water, suitable for pH values up to 9.5.

Bromine measurement with DULCOTEST^® sensors: Safe metering in disinfection processes with bromine. The robustness of the sensors makes them suitable for wide range of water qualities.

Chlorine dioxide measurement with DULCOTEST^® sensors offers precise, reliable, application-specific measured values in real time for all oxidation and disinfection tasks.

The application-based DULCOTEST^® sensors for free chlorine deliver precise measured values and a high degree of monitoring and process reliability in any disinfection application.

Disinfection of swimming pool water with the application-optimised DULCOTEST^® sensors for total available chlorine - exact measured values and high process reliability guaranteed.

Reliably measure total chlorine with the versatile DULCOTEST^® sensors for total chlorine. Accurate measured values and a high degree of monitoring and process reliability are guaranteed.

Temperature measurement with DULCOTEST^® sensors: Can be used for direct temperature measurement or temperature compensation during measurement of pH, fluoride, conductivity, chlorine dioxide or hydrogen peroxide.

The flow meter DulcoFlow^® reliably measures pulsating flows in the range above 0.03 ml/stroke based on the ultrasound measuring principle. The flow meter achieves maximum chemical resistance, as all wetted parts are made of PVDF and PTFE.

Injectors for chlorine gas, series DULCO^®Vaq, generate a stable vacuum even at high operating pressures.

The ready-wired modular metering system DULCODOS^® is used for the ultra-precise metering of chemicals. It has a modular design and can be flexibly integrated into the most varied applications.

Polymer batching station Ultromat^® ULFa (continuous flow system): This metering system can be used to batch flocculation aids for the preparation of a ready-to-use polymer solution. The system was designed for the fully automatic batching of polymer solutions.

The motorised control valve for chlorine gas DULCO^®Vaq type PM 3531 ensures precise electronically controlled metering of the chlorine gas flow. The linear control characteristic is guaranteed by an externally controlled step motor.

OZONFILT^® OZMa represents maximum operational safety with minimal operating costs. The ozone generator is maintenance-free and generates up to 735 g/h of ozone from compressed air or oxygen.

Photometers measure nearly all disinfectants and the pH value based on the photometric principle. They are portable, compact and make safe, simple measurement possible.

The measuring instrument Portamess^® conductivity is a robust, leak-tight and battery-operated hand-held measuring instrument with a large measuring range and automatic or manual temperature compensation, which can be used in the industrial, environmental, food and waste water sectors.

pH and ORP measurement with Portamess^® pH/ORP - battery-powered, hand-held meter with automatic or manual temperature compensation.

Our plastic storage tanks guarantee compliance with statutory specifications taking into account country-specific approvals, which regulate the production and operation of systems for storage and metering or environmentally-hazardous substances.

The vacuum dosing regulator DULCO^®Vaq CGVa meters chlorine gas cost-effectively and highly efficiently. Maximum possible operating safety and reliability is ensured by the use of high-quality materials, such as tantalum and silver.

Vacuum switches DULCO^®Vaq PM 400 and 440 automatically and reliably switch between two chlorine gas storage tanks. They therefore ensure an uninterrupted chlorine gas supply, even if a chlorine gas storage tank becomes empty.

The chlorine gas metering system DULCO^®Vaq type PM 3610 C for automatically controlled metering of chlorine gas. Its simple operation offers safety and precision in accordance with the current state of technology and in line with DIN standards.

Chlorine dioxide system, which continuously produces ClO₂ according to the acid/chlorite method with diluted chemicals. Extremely simple operation, clear construction, analogue control, manual control or via contacts.

Chlorine dioxide system for continuous production, metering and monitoring of chlorine dioxide with concentrated chemicals. Bello Zon^® CDKc is a ready-to-use convenient system with integrated intrinsically safe pre-dilution station.

Chlorine dioxide system for production of a chlorine-free chlorine dioxide solution, especially suitable for multiple points of injection. Bello Zon^® CDLb produces ClO₂ discontinuously using the acid/chlorite process with diluted chemicals.

Chlorine dioxide system for monitoring and metering chlorine dioxide and diluted chemicals. Maximum output and safety due to special reactor concept. Bello Zon^® CDVc can be easily and safely integrated into any water treatment process.

Controller AEGIS II continuously measures and controls the conductivity and biocide concentration to keep pipework and heat exchangers clean.

PE storage tanks produced in a rotation process. ProMinent metering pumps, suction lances and stirrers can all be added. The stackable PE collecting pans are available in matching sizes.

ORP measurements with DULCOTEST^® sensors: Precise, reliable and application-adapted measured values in real time. Can be used in water treatment or industrial process waters with strict requirements.

pH measurements with DULCOTEST^® sensors: Precise, reliable and application-adapted measured values in real time. Control, regulate and monitor chemical processes with the aid of precise measured values.

Accurate measurement of fluoride with DULCOTEST^® sensors in the monitoring of potable water and waste water, suitable for pH values up to 9.5.

Bromine measurement with DULCOTEST^® sensors: Safe metering in disinfection processes with bromine. The robustness of the sensors makes them suitable for wide range of water qualities.

Chlorine dioxide measurement with DULCOTEST^® sensors offers precise, reliable, application-specific measured values in real time for all oxidation and disinfection tasks.

The application-based DULCOTEST^® sensors for free chlorine deliver precise measured values and a high degree of monitoring and process reliability in any disinfection application.

Disinfection of swimming pool water with the application-optimised DULCOTEST^® sensors for total available chlorine - exact measured values and high process reliability guaranteed.

Reliably measure total chlorine with the versatile DULCOTEST^® sensors for total chlorine. Accurate measured values and a high degree of monitoring and process reliability are guaranteed.

Temperature measurement with DULCOTEST^® sensors: Can be used for direct temperature measurement or temperature compensation during measurement of pH, fluoride, conductivity, chlorine dioxide or hydrogen peroxide.

The flow meter DulcoFlow^® reliably measures pulsating flows in the range above 0.03 ml/stroke based on the ultrasound measuring principle. The flow meter achieves maximum chemical resistance, as all wetted parts are made of PVDF and PTFE.

Injectors for chlorine gas, series DULCO^®Vaq, generate a stable vacuum even at high operating pressures.

The ready-wired modular metering system DULCODOS^® is used for the ultra-precise metering of chemicals. It has a modular design and can be flexibly integrated into the most varied applications.

Polymer batching station Ultromat^® ULFa (continuous flow system): This metering system can be used to batch flocculation aids for the preparation of a ready-to-use polymer solution. The system was designed for the fully automatic batching of polymer solutions.

The motorised control valve for chlorine gas DULCO^®Vaq type PM 3531 ensures precise electronically controlled metering of the chlorine gas flow. The linear control characteristic is guaranteed by an externally controlled step motor.

OZONFILT^® OZMa represents maximum operational safety with minimal operating costs. The ozone generator is maintenance-free and generates up to 735 g/h of ozone from compressed air or oxygen.

Photometers measure nearly all disinfectants and the pH value based on the photometric principle. They are portable, compact and make safe, simple measurement possible.

The measuring instrument Portamess^® conductivity is a robust, leak-tight and battery-operated hand-held measuring instrument with a large measuring range and automatic or manual temperature compensation, which can be used in the industrial, environmental, food and waste water sectors.

pH and ORP measurement with Portamess^® pH/ORP - battery-powered, hand-held meter with automatic or manual temperature compensation.

Our plastic storage tanks guarantee compliance with statutory specifications taking into account country-specific approvals, which regulate the production and operation of systems for storage and metering or environmentally-hazardous substances.

The vacuum dosing regulator DULCO^®Vaq CGVa meters chlorine gas cost-effectively and highly efficiently. Maximum possible operating safety and reliability is ensured by the use of high-quality materials, such as tantalum and silver.

Vacuum switches DULCO^®Vaq PM 400 and 440 automatically and reliably switch between two chlorine gas storage tanks. They therefore ensure an uninterrupted chlorine gas supply, even if a chlorine gas storage tank becomes empty.

The chlorine gas metering system DULCO^®Vaq type PM 3610 C for automatically controlled metering of chlorine gas. Its simple operation offers safety and precision in accordance with the current state of technology and in line with DIN standards.

Chlorine dioxide system, which continuously produces ClO₂ according to the acid/chlorite method with diluted chemicals. Extremely simple operation, clear construction, analogue control, manual control or via contacts.

Chlorine dioxide system for continuous production, metering and monitoring of chlorine dioxide with concentrated chemicals. Bello Zon^® CDKc is a ready-to-use convenient system with integrated intrinsically safe pre-dilution station.

Chlorine dioxide system for production of a chlorine-free chlorine dioxide solution, especially suitable for multiple points of injection. Bello Zon^® CDLb produces ClO₂ discontinuously using the acid/chlorite process with diluted chemicals.

Chlorine dioxide system for monitoring and metering chlorine dioxide and diluted chemicals. Maximum output and safety due to special reactor concept. Bello Zon^® CDVc can be easily and safely integrated into any water treatment process.

Controller AEGIS II continuously measures and controls the conductivity and biocide concentration to keep pipework and heat exchangers clean.

PE storage tanks produced in a rotation process. ProMinent metering pumps, suction lances and stirrers can all be added. The stackable PE collecting pans are available in matching sizes.

ORP measurements with DULCOTEST^® sensors: Precise, reliable and application-adapted measured values in real time. Can be used in water treatment or industrial process waters with strict requirements.

pH measurements with DULCOTEST^® sensors: Precise, reliable and application-adapted measured values in real time. Control, regulate and monitor chemical processes with the aid of precise measured values.

Accurate measurement of fluoride with DULCOTEST^® sensors in the monitoring of potable water and waste water, suitable for pH values up to 9.5.

Bromine measurement with DULCOTEST^® sensors: Safe metering in disinfection processes with bromine. The robustness of the sensors makes them suitable for wide range of water qualities.

Chlorine dioxide measurement with DULCOTEST^® sensors offers precise, reliable, application-specific measured values in real time for all oxidation and disinfection tasks.

The application-based DULCOTEST^® sensors for free chlorine deliver precise measured values and a high degree of monitoring and process reliability in any disinfection application.

Disinfection of swimming pool water with the application-optimised DULCOTEST^® sensors for total available chlorine - exact measured values and high process reliability guaranteed.

Reliably measure total chlorine with the versatile DULCOTEST^® sensors for total chlorine. Accurate measured values and a high degree of monitoring and process reliability are guaranteed.

Temperature measurement with DULCOTEST^® sensors: Can be used for direct temperature measurement or temperature compensation during measurement of pH, fluoride, conductivity, chlorine dioxide or hydrogen peroxide.

The flow meter DulcoFlow^® reliably measures pulsating flows in the range above 0.03 ml/stroke based on the ultrasound measuring principle. The flow meter achieves maximum chemical resistance, as all wetted parts are made of PVDF and PTFE.

Injectors for chlorine gas, series DULCO^®Vaq, generate a stable vacuum even at high operating pressures.

The ready-wired modular metering system DULCODOS^® is used for the ultra-precise metering of chemicals. It has a modular design and can be flexibly integrated into the most varied applications.

Polymer batching station Ultromat^® ULFa (continuous flow system): This metering system can be used to batch flocculation aids for the preparation of a ready-to-use polymer solution. The system was designed for the fully automatic batching of polymer solutions.

The motorised control valve for chlorine gas DULCO^®Vaq type PM 3531 ensures precise electronically controlled metering of the chlorine gas flow. The linear control characteristic is guaranteed by an externally controlled step motor.

OZONFILT^® OZMa represents maximum operational safety with minimal operating costs. The ozone generator is maintenance-free and generates up to 735 g/h of ozone from compressed air or oxygen.

Photometers measure nearly all disinfectants and the pH value based on the photometric principle. They are portable, compact and make safe, simple measurement possible.

The measuring instrument Portamess^® conductivity is a robust, leak-tight and battery-operated hand-held measuring instrument with a large measuring range and automatic or manual temperature compensation, which can be used in the industrial, environmental, food and waste water sectors.

pH and ORP measurement with Portamess^® pH/ORP - battery-powered, hand-held meter with automatic or manual temperature compensation.

Our plastic storage tanks guarantee compliance with statutory specifications taking into account country-specific approvals, which regulate the production and operation of systems for storage and metering or environmentally-hazardous substances.

The vacuum dosing regulator DULCO^®Vaq CGVa meters chlorine gas cost-effectively and highly efficiently. Maximum possible operating safety and reliability is ensured by the use of high-quality materials, such as tantalum and silver.

Vacuum switches DULCO^®Vaq PM 400 and 440 automatically and reliably switch between two chlorine gas storage tanks. They therefore ensure an uninterrupted chlorine gas supply, even if a chlorine gas storage tank becomes empty.

The Flemish Ministry of Health only permits approved disinfectants and disinfection processes for protection against legionella. Chlorine dioxide systems Bello Zon® have been certified for this since the beginning of 2018.

Markus Rösch, Divisional Manager for Pool and Wellness at ProMinent Deutschland, provided this positive summing up on the last day of aquanale: “The huge interest shown over the last four days has far exceeded our expectations: “We welcomed many interested visitors and received very positive feedback on the new products we presented.

Ternary oxide systems containing lithium guarantee a high energy density, long service life and high number of charge cycles for lithium storage batteries. Metering systems ensure the quality of the precursors needed for production.

The Carolus Thermen in Aachen in Germany, named after king Charles the Great, are an unparalleled world of wellness. The demanding job of treating the thermal water is handled by our modern electrolysis system and the powerful measuring and control system.

Bacteria and cross-contamination set off all the alarm bells in food production! This article shows how manufacturers of poultry and salad products have used chlorine dioxide systems from ProMinent to efficiently overcome these problems.

Magnificent mountain panorama under cloudless blue skies – guests at the Spa Hotel Tanneck in Allgäu are treated to a pool landscape with precisely this view. Efficient systems from ProMinent ensure a continuous supply of water of incomparable quality.

At drinktec 2017 between 11 and 15 September 2017 in Munich, ProMinent will present its world first, the UV system Dulcodes LP, at stand 316 in hall B3. The system adapts its output according to flow and temperature, even when these parameters change rapidly. The UV system designed especially for use in the food and beverage industry satisfies hygienic design requirements, is CIP-compatible and is fitted with materials compliant with the FDA.

Standard disinfection processes produce chlorate concentrations far above the desired minimum limits. The alternative is DULCO®Lyse, which guarantees a chlorate level far below manufacturers' specifications. ProMinent presents its optimised diaphragm electrolysis process on stand 316 in hall B3 at drinktec 2017. The trade fair runs between 11 and 15 September 2017 in Munich.

ProMinent is presenting ready-wired metering stations DULCODOS® F&B on stand 316 in hall B3 at drinktec 2017, which runs between 11 and 15 September 2017. These metering systems have been specifically developed for the food and beverage sector and are used to meter cleaning agents, disinfectants and additives, as well as additives and auxiliary agents with ultimate precision. They correspond to the fields of application of Directive (EC) No. 1935/2004.

Are you looking for integral concepts or processes for sustainable water treatment? You will be spoilt for choice at ProMinent. True to the motto "Ready for you. Anytime, anywhere", innovative solutions for efficient water disinfection and hygienic production in breweries, the manufacture of soft drinks and the liquid food industry will be on display on stand 316 in hall B3.

The air contains dust which is constantly being swirled around. Then there's water. And high-pressure jets from all directions, for minutes at a time. Harsh conditions – but no problem for the gamma/ X, because it now offers IP 66 protection.

At the end of HANNOVER MESSE 2017, Peter Hitzler, Sales Manager (Industry) at ProMinent Deutschland GmbH, looks back on a successful event: "As part of the International PUMPENplatz stand, we came into contact with excellent leads in Germany and abroad. Our components and systems for the efficient, environmentally friendly and sustainable handling of liquid media met with great approval," he says.

The Flemish Ministry of Health only permits approved disinfectants and disinfection processes for protection against legionella. Chlorine dioxide systems Bello Zon® have been certified for this since the beginning of 2018.

Markus Rösch, Divisional Manager for Pool and Wellness at ProMinent Deutschland, provided this positive summing up on the last day of aquanale: “The huge interest shown over the last four days has far exceeded our expectations: “We welcomed many interested visitors and received very positive feedback on the new products we presented.

Ternary oxide systems containing lithium guarantee a high energy density, long service life and high number of charge cycles for lithium storage batteries. Metering systems ensure the quality of the precursors needed for production.

The Carolus Thermen in Aachen in Germany, named after king Charles the Great, are an unparalleled world of wellness. The demanding job of treating the thermal water is handled by our modern electrolysis system and the powerful measuring and control system.

Bacteria and cross-contamination set off all the alarm bells in food production! This article shows how manufacturers of poultry and salad products have used chlorine dioxide systems from ProMinent to efficiently overcome these problems.

Magnificent mountain panorama under cloudless blue skies – guests at the Spa Hotel Tanneck in Allgäu are treated to a pool landscape with precisely this view. Efficient systems from ProMinent ensure a continuous supply of water of incomparable quality.

At drinktec 2017 between 11 and 15 September 2017 in Munich, ProMinent will present its world first, the UV system Dulcodes LP, at stand 316 in hall B3. The system adapts its output according to flow and temperature, even when these parameters change rapidly. The UV system designed especially for use in the food and beverage industry satisfies hygienic design requirements, is CIP-compatible and is fitted with materials compliant with the FDA.

Standard disinfection processes produce chlorate concentrations far above the desired minimum limits. The alternative is DULCO®Lyse, which guarantees a chlorate level far below manufacturers' specifications. ProMinent presents its optimised diaphragm electrolysis process on stand 316 in hall B3 at drinktec 2017. The trade fair runs between 11 and 15 September 2017 in Munich.

ProMinent is presenting ready-wired metering stations DULCODOS® F&B on stand 316 in hall B3 at drinktec 2017, which runs between 11 and 15 September 2017. These metering systems have been specifically developed for the food and beverage sector and are used to meter cleaning agents, disinfectants and additives, as well as additives and auxiliary agents with ultimate precision. They correspond to the fields of application of Directive (EC) No. 1935/2004.

Are you looking for integral concepts or processes for sustainable water treatment? You will be spoilt for choice at ProMinent. True to the motto "Ready for you. Anytime, anywhere", innovative solutions for efficient water disinfection and hygienic production in breweries, the manufacture of soft drinks and the liquid food industry will be on display on stand 316 in hall B3.

The air contains dust which is constantly being swirled around. Then there's water. And high-pressure jets from all directions, for minutes at a time. Harsh conditions – but no problem for the gamma/ X, because it now offers IP 66 protection.

At the end of HANNOVER MESSE 2017, Peter Hitzler, Sales Manager (Industry) at ProMinent Deutschland GmbH, looks back on a successful event: "As part of the International PUMPENplatz stand, we came into contact with excellent leads in Germany and abroad. Our components and systems for the efficient, environmentally friendly and sustainable handling of liquid media met with great approval," he says.

The Flemish Ministry of Health only permits approved disinfectants and disinfection processes for protection against legionella. Chlorine dioxide systems Bello Zon® have been certified for this since the beginning of 2018.

Markus Rösch, Divisional Manager for Pool and Wellness at ProMinent Deutschland, provided this positive summing up on the last day of aquanale: “The huge interest shown over the last four days has far exceeded our expectations: “We welcomed many interested visitors and received very positive feedback on the new products we presented.

Ternary oxide systems containing lithium guarantee a high energy density, long service life and high number of charge cycles for lithium storage batteries. Metering systems ensure the quality of the precursors needed for production.

The Carolus Thermen in Aachen in Germany, named after king Charles the Great, are an unparalleled world of wellness. The demanding job of treating the thermal water is handled by our modern electrolysis system and the powerful measuring and control system.

Bacteria and cross-contamination set off all the alarm bells in food production! This article shows how manufacturers of poultry and salad products have used chlorine dioxide systems from ProMinent to efficiently overcome these problems.

Magnificent mountain panorama under cloudless blue skies – guests at the Spa Hotel Tanneck in Allgäu are treated to a pool landscape with precisely this view. Efficient systems from ProMinent ensure a continuous supply of water of incomparable quality.

At drinktec 2017 between 11 and 15 September 2017 in Munich, ProMinent will present its world first, the UV system Dulcodes LP, at stand 316 in hall B3. The system adapts its output according to flow and temperature, even when these parameters change rapidly. The UV system designed especially for use in the food and beverage industry satisfies hygienic design requirements, is CIP-compatible and is fitted with materials compliant with the FDA.

Standard disinfection processes produce chlorate concentrations far above the desired minimum limits. The alternative is DULCO®Lyse, which guarantees a chlorate level far below manufacturers' specifications. ProMinent presents its optimised diaphragm electrolysis process on stand 316 in hall B3 at drinktec 2017. The trade fair runs between 11 and 15 September 2017 in Munich.

ProMinent is presenting ready-wired metering stations DULCODOS® F&B on stand 316 in hall B3 at drinktec 2017, which runs between 11 and 15 September 2017. These metering systems have been specifically developed for the food and beverage sector and are used to meter cleaning agents, disinfectants and additives, as well as additives and auxiliary agents with ultimate precision. They correspond to the fields of application of Directive (EC) No. 1935/2004.

Are you looking for integral concepts or processes for sustainable water treatment? You will be spoilt for choice at ProMinent. True to the motto "Ready for you. Anytime, anywhere", innovative solutions for efficient water disinfection and hygienic production in breweries, the manufacture of soft drinks and the liquid food industry will be on display on stand 316 in hall B3.

The air contains dust which is constantly being swirled around. Then there's water. And high-pressure jets from all directions, for minutes at a time. Harsh conditions – but no problem for the gamma/ X, because it now offers IP 66 protection.

At the end of HANNOVER MESSE 2017, Peter Hitzler, Sales Manager (Industry) at ProMinent Deutschland GmbH, looks back on a successful event: "As part of the International PUMPENplatz stand, we came into contact with excellent leads in Germany and abroad. Our components and systems for the efficient, environmentally friendly and sustainable handling of liquid media met with great approval," he says.

The Flemish Ministry of Health only permits approved disinfectants and disinfection processes for protection against legionella. Chlorine dioxide systems Bello Zon® have been certified for this since the beginning of 2018.

Markus Rösch, Divisional Manager for Pool and Wellness at ProMinent Deutschland, provided this positive summing up on the last day of aquanale: “The huge interest shown over the last four days has far exceeded our expectations: “We welcomed many interested visitors and received very positive feedback on the new products we presented.

Ternary oxide systems containing lithium guarantee a high energy density, long service life and high number of charge cycles for lithium storage batteries. Metering systems ensure the quality of the precursors needed for production.

The Carolus Thermen in Aachen in Germany, named after king Charles the Great, are an unparalleled world of wellness. The demanding job of treating the thermal water is handled by our modern electrolysis system and the powerful measuring and control system.

Bacteria and cross-contamination set off all the alarm bells in food production! This article shows how manufacturers of poultry and salad products have used chlorine dioxide systems from ProMinent to efficiently overcome these problems.

Magnificent mountain panorama under cloudless blue skies – guests at the Spa Hotel Tanneck in Allgäu are treated to a pool landscape with precisely this view. Efficient systems from ProMinent ensure a continuous supply of water of incomparable quality.

At drinktec 2017 between 11 and 15 September 2017 in Munich, ProMinent will present its world first, the UV system Dulcodes LP, at stand 316 in hall B3. The system adapts its output according to flow and temperature, even when these parameters change rapidly. The UV system designed especially for use in the food and beverage industry satisfies hygienic design requirements, is CIP-compatible and is fitted with materials compliant with the FDA.

Standard disinfection processes produce chlorate concentrations far above the desired minimum limits. The alternative is DULCO®Lyse, which guarantees a chlorate level far below manufacturers' specifications. ProMinent presents its optimised diaphragm electrolysis process on stand 316 in hall B3 at drinktec 2017. The trade fair runs between 11 and 15 September 2017 in Munich.

ProMinent is presenting ready-wired metering stations DULCODOS® F&B on stand 316 in hall B3 at drinktec 2017, which runs between 11 and 15 September 2017. These metering systems have been specifically developed for the food and beverage sector and are used to meter cleaning agents, disinfectants and additives, as well as additives and auxiliary agents with ultimate precision. They correspond to the fields of application of Directive (EC) No. 1935/2004.

Are you looking for integral concepts or processes for sustainable water treatment? You will be spoilt for choice at ProMinent. True to the motto "Ready for you. Anytime, anywhere", innovative solutions for efficient water disinfection and hygienic production in breweries, the manufacture of soft drinks and the liquid food industry will be on display on stand 316 in hall B3.

The air contains dust which is constantly being swirled around. Then there's water. And high-pressure jets from all directions, for minutes at a time. Harsh conditions – but no problem for the gamma/ X, because it now offers IP 66 protection.

At the end of HANNOVER MESSE 2017, Peter Hitzler, Sales Manager (Industry) at ProMinent Deutschland GmbH, looks back on a successful event: "As part of the International PUMPENplatz stand, we came into contact with excellent leads in Germany and abroad. Our components and systems for the efficient, environmentally friendly and sustainable handling of liquid media met with great approval," he says.

The Flemish Ministry of Health only permits approved disinfectants and disinfection processes for protection against legionella. Chlorine dioxide systems Bello Zon® have been certified for this since the beginning of 2018.

Markus Rösch, Divisional Manager for Pool and Wellness at ProMinent Deutschland, provided this positive summing up on the last day of aquanale: “The huge interest shown over the last four days has far exceeded our expectations: “We welcomed many interested visitors and received very positive feedback on the new products we presented.

Ternary oxide systems containing lithium guarantee a high energy density, long service life and high number of charge cycles for lithium storage batteries. Metering systems ensure the quality of the precursors needed for production.

The Carolus Thermen in Aachen in Germany, named after king Charles the Great, are an unparalleled world of wellness. The demanding job of treating the thermal water is handled by our modern electrolysis system and the powerful measuring and control system.

Bacteria and cross-contamination set off all the alarm bells in food production! This article shows how manufacturers of poultry and salad products have used chlorine dioxide systems from ProMinent to efficiently overcome these problems.

Magnificent mountain panorama under cloudless blue skies – guests at the Spa Hotel Tanneck in Allgäu are treated to a pool landscape with precisely this view. Efficient systems from ProMinent ensure a continuous supply of water of incomparable quality.

At drinktec 2017 between 11 and 15 September 2017 in Munich, ProMinent will present its world first, the UV system Dulcodes LP, at stand 316 in hall B3. The system adapts its output according to flow and temperature, even when these parameters change rapidly. The UV system designed especially for use in the food and beverage industry satisfies hygienic design requirements, is CIP-compatible and is fitted with materials compliant with the FDA.

Standard disinfection processes produce chlorate concentrations far above the desired minimum limits. The alternative is DULCO®Lyse, which guarantees a chlorate level far below manufacturers' specifications. ProMinent presents its optimised diaphragm electrolysis process on stand 316 in hall B3 at drinktec 2017. The trade fair runs between 11 and 15 September 2017 in Munich.

ProMinent is presenting ready-wired metering stations DULCODOS® F&B on stand 316 in hall B3 at drinktec 2017, which runs between 11 and 15 September 2017. These metering systems have been specifically developed for the food and beverage sector and are used to meter cleaning agents, disinfectants and additives, as well as additives and auxiliary agents with ultimate precision. They correspond to the fields of application of Directive (EC) No. 1935/2004.

Are you looking for integral concepts or processes for sustainable water treatment? You will be spoilt for choice at ProMinent. True to the motto "Ready for you. Anytime, anywhere", innovative solutions for efficient water disinfection and hygienic production in breweries, the manufacture of soft drinks and the liquid food industry will be on display on stand 316 in hall B3.

The air contains dust which is constantly being swirled around. Then there's water. And high-pressure jets from all directions, for minutes at a time. Harsh conditions – but no problem for the gamma/ X, because it now offers IP 66 protection.

At the end of HANNOVER MESSE 2017, Peter Hitzler, Sales Manager (Industry) at ProMinent Deutschland GmbH, looks back on a successful event: "As part of the International PUMPENplatz stand, we came into contact with excellent leads in Germany and abroad. Our components and systems for the efficient, environmentally friendly and sustainable handling of liquid media met with great approval," he says.

The Flemish Ministry of Health only permits approved disinfectants and disinfection processes for protection against legionella. Chlorine dioxide systems Bello Zon® have been certified for this since the beginning of 2018.

Markus Rösch, Divisional Manager for Pool and Wellness at ProMinent Deutschland, provided this positive summing up on the last day of aquanale: “The huge interest shown over the last four days has far exceeded our expectations: “We welcomed many interested visitors and received very positive feedback on the new products we presented.

Ternary oxide systems containing lithium guarantee a high energy density, long service life and high number of charge cycles for lithium storage batteries. Metering systems ensure the quality of the precursors needed for production.

The Carolus Thermen in Aachen in Germany, named after king Charles the Great, are an unparalleled world of wellness. The demanding job of treating the thermal water is handled by our modern electrolysis system and the powerful measuring and control system.

Bacteria and cross-contamination set off all the alarm bells in food production! This article shows how manufacturers of poultry and salad products have used chlorine dioxide systems from ProMinent to efficiently overcome these problems.

Magnificent mountain panorama under cloudless blue skies – guests at the Spa Hotel Tanneck in Allgäu are treated to a pool landscape with precisely this view. Efficient systems from ProMinent ensure a continuous supply of water of incomparable quality.

At drinktec 2017 between 11 and 15 September 2017 in Munich, ProMinent will present its world first, the UV system Dulcodes LP, at stand 316 in hall B3. The system adapts its output according to flow and temperature, even when these parameters change rapidly. The UV system designed especially for use in the food and beverage industry satisfies hygienic design requirements, is CIP-compatible and is fitted with materials compliant with the FDA.

Standard disinfection processes produce chlorate concentrations far above the desired minimum limits. The alternative is DULCO®Lyse, which guarantees a chlorate level far below manufacturers' specifications. ProMinent presents its optimised diaphragm electrolysis process on stand 316 in hall B3 at drinktec 2017. The trade fair runs between 11 and 15 September 2017 in Munich.

ProMinent is presenting ready-wired metering stations DULCODOS® F&B on stand 316 in hall B3 at drinktec 2017, which runs between 11 and 15 September 2017. These metering systems have been specifically developed for the food and beverage sector and are used to meter cleaning agents, disinfectants and additives, as well as additives and auxiliary agents with ultimate precision. They correspond to the fields of application of Directive (EC) No. 1935/2004.

Are you looking for integral concepts or processes for sustainable water treatment? You will be spoilt for choice at ProMinent. True to the motto "Ready for you. Anytime, anywhere", innovative solutions for efficient water disinfection and hygienic production in breweries, the manufacture of soft drinks and the liquid food industry will be on display on stand 316 in hall B3.

The air contains dust which is constantly being swirled around. Then there's water. And high-pressure jets from all directions, for minutes at a time. Harsh conditions – but no problem for the gamma/ X, because it now offers IP 66 protection.

At the end of HANNOVER MESSE 2017, Peter Hitzler, Sales Manager (Industry) at ProMinent Deutschland GmbH, looks back on a successful event: "As part of the International PUMPENplatz stand, we came into contact with excellent leads in Germany and abroad. Our components and systems for the efficient, environmentally friendly and sustainable handling of liquid media met with great approval," he says.