Metering Systems for Polymers
Removing solids from liquids demands the use of liquid or powder polymers. This is achieved with polymer batching and metering systems. The experts in waste water treatment at ProMinent understand how to provide the efficient technology to support this specialist application. For the most stringent requirements, they developed Ultromat® metering systems. They are especially easy to install and operate.
Products
Metering System POLYMORE
Capacity range of up to 18,000 l/h
The metering system POLYMORE is the inline preparation station in which the liquid polymer is introduced into the pressure-encapsulated multi-zone mixing equipment through a peristaltic pump. The result is a prepared and homogeneous polymer solution. more
Your benefits
- Wall-mounted: saves space
- Low-maintenance peristaltic pump for metering the liquid polymer
- Simple and fast to connect: requires only water, liquid polymer and power
- Automatic control
Metering System PolyRex
Capacity range of up to 8200 l/h
The metering system PolyRex is a double-decker batching station for the processing of liquid and powdered polymers. It consists of the feed and mixer unit and the two stainless steel double-decker tanks. The polymers used are ideally utilised. more
Your benefits
Compact controller ABB AC500 PM573-ETH and touch panel CP635
- Dust-free filling of the powder storage tank thanks to use of a vacuum conveyor
- Double screw metering unit with 2 counter-rotating conveyor screws enables low-pulsation metering with a high level of dosing precision.
- Pressure reducer provides for a constant water supply
- Effective 3-phase mixing of the polymer solution
- No short-circuiting effect: polymer particles cannot pass through the process without activation
Metering System Ultromat® MT for Batch Operation
Capacity range 120 – 3,800 l/h
Manual polymer batching station Ultromat® MT: Perfect metering system for the processing of small quantities of liquid and powdered polymers: extremely robust and cost-effective. more
Your benefits
- Ideal for use where there is no need for continuous operation
- Manual addition of flocculants
- Robust and cost-effective
- Round polypropylene batching tank
- Flushing system with wetting cone and injector
- Gentle mixing of the polymer solution
Metering System Ultromat® ULDa
Extraction rates of up to 2,000 l/h
The ProMinent metering system Ultromat® ULDa is an automatic polyelectrolyte preparation system. It is useful wherever polymers need to be automatically prepared as polymer solutions to act as flocculation aids. more
Your benefits
- Processing of liquid polymer (0.05 – 1.0 %) and powdered polymers (0.05 – 0.5 %)
- No mixing of fresh and matured polymer
- Wide range of versions for specific applications
- Operator-controlled input of solvent concentration and calibration of powder feeder and liquid concentrate pump
- Water apparatus with flow meter and fitting set for the dilution water
- Gentle mixing of the polymer solution (electric stirrer)
Metering System Ultromat® ULFa
Extraction rates of up to 8,000 l/h
Polymer batching station Ultromat® ULFa (continuous flow system): This metering system can be used to batch flocculation aids for the preparation of a ready-to-use polymer solution. The system was designed for the fully automatic batching of polymer solutions. more
Your benefits
- Processing of liquid polymers (0.05 – 1.0 %) and powdered polymers (0.05 – 0.5 %)
- Minimal carry-over of product and thus higher-quality results
- Extraction of the polymer solution and drainage of the chambers through the front of the storage tank
- User-managed input of the solvent concentration and calibration of powder feeder unit and liquid concentrate pump
- Gentle mixing of the polymer solution (electric stirrer)
- Pressure sensor for the measurement of the liquid level
Metering System Ultromat® ULPa
Extraction rates from 400 to 4,000 l/h
The metering system Ultromat® ULPa (oscillating system) is ideal for batching flocculation aids for the preparation of a ready-to-use polymer solution. more
Your benefits
- Processing of liquid polymers (0.05 - 1.0 %) and powdered polymers (0.05 - 0.5 %)
- No mixing of fresh and matured polymer
- Operator-controlled input of solvent concentration and calibration of powder feeder and liquid concentrate pump
- Gentle mixing of the polymer solution (electric stirrer)
- Pressure sensor for the measurement of the liquid level
- Version with terminal box available on request
Contact us
Close Form
