Suggestions

Electrolysis Systems

No chemicals required

There is no need to transport chemicals. No need to store or handle hazardous substances. Instead, sophisticated systems use harmless sodium chloride – ordinary salt – to produce chlorine, hydrogen and sodium hydroxide. Which means good news for the environment.

It's really very simple

Electrolysis is an economically sensible and technically perfected alternative to the metering of sodium hypochlorite or other disinfectants. The chlorine can either be metered into the water directly as hypochlorous acid (HOCl) or temporarily stored with the sodium hydroxide in the form of sodium hypochlorite (NaOCl).

Reassuring to know

Disinfection with sodium chloride is completely safe. With ProMinent electrolysis systems you can confidently say goodbye to the storage, transport and handling of hazardous chemicals. You can generate chlorine and perform pH correction with a single system (CHLORINSITU® IV Plus/compact). ProMinent electrolysis systems are negative pressure systems, so they offer maximum operating reliability.

We offer a range of solutions for potable, process and swimming pool water. You can find various application combinations in the table. If you have a specific problem, don't hesitate to ask our specialists. If they don't have a solution ready to hand, they will find one. That's guaranteed.

Products

Electrolysis System CHLORINSITU® III Compact

Output of 25 – 50 g sodium hypochlorite per hour

Generation of sodium hypochlorite in smaller amounts for smaller swimming pools: Electrolysis system CHLORINSITU® III Compact. more

Your benefits

  • Sodium hypochlorite solution low in chloride and chlorate with a high chlorine concentration (25 g/l FAC)
  • Minimal acid consumption for pH correction, making savings of up to 70 % possible
  • Cost-effective operation thanks to the use of sodium chloride as an inexpensive raw material and minimal chemical consumption for pH adjustment
  • Robust, simple technology
  • Compact space-saving design, ready mounted on a wall panel

Electrolysis System CHLORINSITU® IV Compact

Output of 25 – 50 g ultra-pure active chlorine per hour

Generate ultra-pure chlorine gas using the vacuum method with electrolysis system CHLORINSITU® IV Compact. Cost-effective, robust and compact. more

Your benefits

  • Chlorination and pH value adjustment in a single system
  • Production and metering of ultra-pure hypochlorous acid
  • Cost-effective operation thanks to the use of sodium chloride as an inexpensive raw material and no consumption of chemicals for pH correction
  • Safe vacuum system technology
  • Robust, simple technology
  • Compact space-saving design, ready mounted on a wall panel

Electrolysis System CHLORINSITU® II

Output of 50 – 2,400 g sodium hypochlorite per hour

Electrolysis system CHLORINSITU® II: Robust, safe and economical system for areas where carry-over of sodium chloride into the water being treated is not a problem. more

Your benefits

  • Robust, simple technology
  • Safe system control with remote diagnosis by Remote Control Engineer
  • Cost-effective operation thanks to the use of sodium chloride as an inexpensive raw material and lower chemical consumption for pH adjustment
  • Compact, space-saving design
  • Improved working conditions for operating personnel
  • No risk of confusing dangerous chemical tanks

Electrolysis System CHLORINSITU® III

Output of 100 – 10,000 g sodium hypochlorite per hour

Need sodium hypochlorite that is high-purity or low-chloride and low-chlorate? The electrolysis system CHLORINSITU® III is the solution. Can be used for potable water, waste water, process water, swimming pool water and in cooling towers. more

Your benefits

  • Sodium hypochlorite solution low in chloride and chlorate with a high chlorine concentration (25 g/l FAC)
  • Minimal acid consumption for pH correction, making savings of up to 70 % possible
  • Safe system control with remote diagnosis by Remote Control Engineer
  • Excellent service life of the diaphragm cells, thanks to constant vacuum
  • A frequency-controlled circulation pump maintains the vacuum constant in the enclosed anode area
  • Maximum operating safety due to their design as negative pressure systems
new

Electrolysis System CHLORINSITU® V Plus

Capacity 100 – 3,500 g of ultra-pure active chlorine per hour

Generation of active chlorine in combination with a sodium hypochlorite solution using the vacuum process with the electrolysis system CHLORINSITU® V Plus. Chlorination and pH value adjustment from a single system. more

Your benefits

  • Chlorination and pH adjustment with a single system
  • Exceedingly low chloride and chlorate content
  • Reservoir of sodium hypochlorite solution to cover peak demand
  • Production and metering of ultra-pure hypochlorous acid combined with sodium hypochlorite production
  • Excellent service life of the diaphragm cells, thanks to constant vacuum
  • Maximum operating safety due to their design as negative pressure systems
new

Electrolysis System CHLORINSITU® V

Output of 100 – 3,500 g ultra-pure active chlorine per hour

Generate ultra-pure active chlorine using the vacuum method with electrolysis system CHLORINSITU® V. Suited to applications for metering hypochlorous acid and simultaneously correcting the pH value. more

Your benefits

  • Chlorination and pH adjustment with a single system
  • Exceedingly low chloride and chlorate content
  • Production and metering of ultra-pure hypochlorous acid without temporary storage
  • Safe system control with remote diagnosis by Remote Control Engineer
  • Excellent service life of the diaphragm cells, thanks to constant vacuum
  • A frequency-controlled circulation pump maintains the vacuum constant in the enclosed anode area

Electrolysis System DULCO®Lyse

Output of 100 – 300 g ultra-pure hypochlorous acid per hour

Efficient production of DULCO®Lyt 400 (ECA water) with an exceptionally low chloride and chlorate content. Maximum protection against corrosion and very good cost efficiency because of low chloride. more

Your benefits

  • Extremely low chloride and chlorate content for maximum protection and corrosion-free system technology
  • Environmentally friendly, highly effective disinfection
  • Long-term freedom from germs, without any transport, storage or handling of concentrated chemicals
  • Handling of chemicals is reduced (only sodium chloride is required)
  • Compact, space-saving design
  • Cost-effective operation, thanks to use of inexpensive sodium chloride as a raw material

Contact us

Ralf Kiermaier

Vice President Sales and Marketing, ProMinent GmbH

Save contact

»Please send us your request! We will contact you shortly.«

+49 6221 842 0  Send request   

Close Form

Your Request

Personal Information


Further product +
Attachment
Upload Next file

Personal Information


Please fill in all mandatory fields.
*Mandatory fields

Check and Send


Personal Information:
Salutation
Title
Last name  
First name  
Company
Customer ID
E-mail address
Phone
Street
House no.
City  
Country
Callback Yes

Back

Applications

1 2