Suggestions
Immersion Fittings for Sensors

Your sensor is ideally accommodated in the immersion fitting. This fitting ensures optimum measuring conditions.

Product description

Getting stuck in

We offer a range of immersion fittings for specific integration into processes. They hold potentiometric sensors or conductivity sensors and ensure optimum operating conditions for measurement.

PVC Immersion Assembly Type ETS 1 P

Immersion fitting to hold one conductivity, Pt 100, pH or ORP sensor with SN6 plug-in head and PG 13.5 screw-in thread. In addition, a stainless steel rod is integrated as a liquid reference potential.

Sensor connector (inner)SN6 connector
Signal lead connector (outer)Coax SN6 male connector
MaterialRigid PVC
Type of fittingClamping flange with mounting plate
Immersion depthVariable
Max. temperature55 °C
Order no.
ETS 1 P914950
  • pk_6_064

PP Immersion Assembly Type lPHa 1-PP

Immersion fitting for holding one sensor (e.g. pH, ORP) with PG 13.5 screw-in thread and standard 120 mm length. The inside diameter is sized so that either pH or ORP transducers can be installed. In addition, a stainless steel rod is integrated as a liquid reference potential. The outside diameter is 40 mm. Immersion depths of 1 and 2 m are offered, however customers can independently lengthen or shorten the immersion pipe. The fitting head contains two cable connectors; measuring lines of 3-7 mm diameter can be led out.

Note: Measuring lines are not included in the scope of delivery.

Material

Probe housing material: PP

Seal material: FKM

Max. temperature80 °C
PressureInstallation at atmospheric pressure
Immersion depthMax. 1, or 2 m; variable
Immersion lance diameter40 mm

Dimensions Table: Flange

Fixed flangeDN 40
Hole circle Ø K110 mm
Bolts4 x M16
Thickness d218 mm
Diameter Ø D150 mm
Length when fittedOrder no.
m
IPHa 1-PP11008600
IPHa 1-PP21008601

Other materials available on request.

FKM = Fluorine Rubber

Accessories for Fitting Type IPHa 1

Order no.
Immersion pipe mounting for IPHa 1-PP1008624
Clamped threaded connector with fixed flange DN 40 according to DIN 2642 for lPHa 1-PP 1008626
Clamped threaded connector for welding connection for lPHa 1-PP1008628
Protective (weatherproofed) cover for assembly head for IPHa 1-PP1008630
Water-retaining basin for IPHa 1-PP 1008632
Weatherproof cover PP1023368
  • pk_6_080
  • pk_6_094_flansch

PP Immersion Assembly Type lPHa 3 -PP

Immersion fitting to hold up to three sensors (e.g. pH, ORP, temperature) with PG 13.5 screw-in thread and standard 120 mm length. The inside diameter is dimensioned so that up to three pH, ORP or temperature transducers can be installed. In addition, a stainless steel rod is integrated as a liquid reference potential. The outside diameter is 75 mm. Immersion depths of 1 and 2 m are offered, however customers can independently shorten the immersion pipe. The fitting head contains four cable connectors; measuring lines of 3-7 mm diameter can be led out.

Note: Measuring lines are not included in the scope of delivery.

Material

Probe housing material: PP

Seal material: FKM

Max. temperature80 °C
PressureInstallation at atmospheric pressure
Immersion depthMax. 1, or 2 m; variable
Immersion lance diameter75 mm

Dimensions Table: Flange

Fixed flangeDN 65
Hole circle Ø K145 mm
Screws4 x M16
Thickness d218 mm
Diameter Ø D185 mm
Length when fittedOrder no.
m
IPHa 3-PP11008602
IPHa 3-PP21008603

Other materials available on request.

FKM = Fluorine Rubber

Accessories for Fitting Type IPHa 3

Order no.
Immersion pipe mounting for lPHa 3-PP1008625
Clamped threaded connector with fixed flange DN 65 according to DIN 2642 for lPHa 3-PP 1008627
Clamped threaded connector for welding connection for lPHa 3-PP1008629
Protective (weatherproofed) cover for assembly head for lPHa 3-PP1008631
Water-retaining basin for IPHa 3-PP 1008633
Weatherproof cover PP1023368
  • pk_6_081
  • pk_6_094_flansch

Immersion Assembly Type IMA-ICT 2

Immersion fitting to hold one inductive conductivity sensor of type ICT 2.

Material

Fittings: Stainless steel 1.4404

Seal: FKM

Max. temperature125 °C
Max. pressure10 bar
Length when fitted1 m
Immersion lance diameter70 mm
FlangeStainless steel flange DN 80 PN 16

Dimensions Table: Flange

FlangeDN 65/PN 16
Ø D200 mm
Ø K160 mm
Ø d28 x 18 mm
b20 mm
Ø a63.5 mm
ScrewsM 16
Order no.
IMA-ICT 21023353

Adaptation to processes through flange installation in tank from top.

  • pk_6_094

Immersion Assembly Type TA-LM

Immersion fitting to hold one conductivity sensor of type LM or LMP with M 28 thread for side fastening with pipe clips (2 included in the scope of delivery) or with union nut/collar bush/screw-in part for fastening at top of tank cover.

Note: Union nut and screw-in part are to supplied by the customer (standard parts).

MaterialPP
Max. temperature70 °C
Enclosure ratingIP 68
Max. pressure5.0
Immersion lance diameter32 mm
Pipe length890 mm
LengthOrder no.
mm
TA-LM8901020632
Headed bush d501020634
Extension tube 10009101020633
  • pk_6_053
  • pk_6_078
  • pk_6_079

Downloads for Immersion Fittings for Sensors

More in the Download Centre

0 Results
Filter by document type
Application Example / Reference (0)
Brochure / Flyer (0)
Catalogue (0)
Certificate / Declaration (0)
Data Sheet (0)
Drawing / Dimensional Drawing / 3D (0)
Exploded View / Spare Parts (0)
Material Safety Data Sheet (0)
Operating Instructions (0)
Others (0)
Press Release (0)
Publication / Article (0)
Software (0)
Wiring Diagram (0)

Selected filters:

Matching downloads

Sort by A to Z
Load more matches ...
No more matches available!

Leider haben wir kein passendes Suchergebnis gefunden.

Alle Wörter richtig geschrieben?
Mit weniger oder anderen Suchbegriffen erneut versuchen?

Please try again later

Service Unavailable

The server is temporarily unable to service your request due to maintenance downtime or capacity problems. Please try again later.

Overview

Getting stuck in

We offer a range of immersion fittings for specific integration into processes. They hold potentiometric sensors or conductivity sensors and ensure optimum operating conditions for measurement.

Technical Data

Downloads

Contact us

Ralf Kiermaier

Vice President Sales and Marketing, ProMinent GmbH

»Please send us your request! We will contact you shortly.«

+49 6221 842 0  Send request   

Close Form

Your Request

Personal Information


Further product +
Attachment Maximum file size 10 MB
Upload Next file

Personal Information


Please fill in all mandatory fields.
*Mandatory fields

Check and Send


Personal Information:
Salutation
Title
Last name  
First name  
Company
Customer ID
E-mail address
Phone
Street
House no.
City  
Country
Callback Yes

Back

Matching Products

News and Events

1 2