Suggestions
DULCOTEST® ORP Sensors

Measuring range -1,500 … +1,500 mV

ORP measurements with DULCOTEST® sensors: Precise, reliable and application-adapted measured values in real time. Can be used in water treatment or industrial process waters with strict requirements.

Product description

Reliable online measurement of ORP – with DULCOTEST® sensors

Our product line of DULCOTEST® ORP electrodes provides a wide range of sensors for different measuring tasks. The field of application covers everything from simpler water treatment tasks to industrial process waters with more stringent requirements in terms of temperature, pressure, contamination tolerance and chemical resistance.

The production of our electrodes is subject to very strict quality controls. Routine steps are automated but critical steps are carried out manually under expert supervision. In this way we achieve optimum reproducible quality and cost reduction.

ORP potential is a measured variable that quantifies the presence of oxidants or reducing agents in a medium under specific conditions on a non-selective basis. Measuring this parameter is relatively inexpensive, but does have some drawbacks: no selective measurement of a specific oxidant / reducing agent, strong dependence on pH, measuring signal tends towards a saturation curve as concentration increases. To measure specific reducing agents and oxidants selectively, without the above disadvantages, suitable amperometric sensors are used (e.g. chlorine sensors).

Your benefits

  • Precise and reliable measurement enables efficient processes and maximum process reliability
  • The wide choice of sensor types with different constructions makes them reliable components in many applications
  • A long service life is achieved through the use of select quality materials for the measuring electrodes and diaphragms and a stable reference system. This minimises both downtime and maintenance
  • With short storage times and fast delivery, your sensors can be up and running very quickly and you can make maximum use of their service life (all glass sensors start to age as soon as they leave production)
  • Wide range of special versions for fitting length, cable length and plugs for made-to-measure connection to your process
  • Unique label for OEM partners

Field of application

  • Cyanide detoxification at a high pH value by oxidation
  • Chromate detoxification at a low pH value by reduction
  • Monitoring of disinfection effectiveness with oxidant metering
  • Swimming pool water, potable water
  • Process water
  • Chemically contaminated water
  • Cooling water, waste water
    1 2 3 4 5

    Technical Details

    • Selection of sensor type according to the application
    • The insertion angle must be > 15° from the horizontal
    • Maximum flow < 0.8 m/s
    • With cable lengths > 10 m, use the 4-20 mA transducer type PHV1
    • Calibration using quality buffer solutions

    ORP Sensor RHES-Pt-SE

    ORP sensor optimised for use in potable water treatment, swimming pools/hot tubs at up to 60 °C/3 bar

    Your benefits

    • Electrochemical combination electrode: ORP and reference electrode integrated
    • Diaphragm and reference system optimised for use in swimming pools and for potable water
    • Ceramic diaphragm with special material, optimised size and optimised pore diameter
    • Long service life due to reduced diffusion ("bleeding") of the electrolyte
    • Long service life due to the material, which is inert to aggressive disinfectants
    • Stable reference system
    • Rotating sensor head sleeve. This means that the cables can remain connected during installation and dismantling of the sensor, avoiding moisture on the plug-in contacts
    • Lead-free glass for advanced and environmentally-friendly production, use and disposal (RoHS-compliant)
    Temperature0 … 60 °C
    Max. pressure3.0 bar
    Min. conductivity150 µS/cm
    ElectrolyteGel containing potassium chloride
    ORP electrodePlatinum
    DiaphragmCeramic
    Sensor shaftGlass
    Shaft diameter12 mm
    Fitting length120 ±3 mm
    Fitting positionVertical up to +25°
    ThreadPG 13.5
    Electrical connectionSN6 plug-in head, rotatable with a ProMinent cable
    Enclosure ratingIP 65
    InstallationBypass: open outlet or return of the sample water into the process line, inline: direct installation into the pipework; fixed or replaceable (replaceable fitting), tank, channel: Immersion in the immersion tube
    Measuring and control equipmentAll DULCOMETER® controllers and solenoid-driven metering pumps types D_4a and delta®
    Typical applicationsSwimming pools, whirlpools, potable water
    Resistance toDisinfectant
    Measuring principle, technologyDirect potentiometric measurement, 2 electrodes, gel electrolyte, ceramic diaphragm
    Fitting lengthOrder no.
    RHES-Pt-SE SLg100100 ±3 mm1051746
    RHES-Pt-SE120 ±3 mm150703

    ORP Sensor RHES-Au-SE

    ORP sensor optimised for use in potable water treatment, swimming pools/hot tubs when electrolysis processes are used for disinfection and with ozone treatment at up to 60 °C/3 bar

    Your benefits

    • Electrochemical combination electrode: ORP and reference electrode integrated
    • Gold electrode to prevent faults by products from electrolysis processes where the electrodes are immersed directly into the sample water
    • Diaphragm and reference system optimised for use in swimming pools and for potable water
    • Ceramic diaphragm with special material, optimised size and optimised pore diameter
    • Long service life due to reduced diffusion ("bleeding") of the electrolyte
    • Long service life due to material, which is inert to aggressive disinfectants
    • Stable reference system
    • Rotating sensor head sleeve. This means that the cables can remain connected during installation and dismantling of the sensor, avoiding moisture on the plug-in contacts
    • Lead-free glass for advanced and environmentally-friendly production, use and disposal (RoHS-compliant)
    Temperature0 … 60 °C
    Max. pressure3.0 bar
    Min. conductivity150 µS/cm
    ElectrolyteGel containing potassium chloride
    ORP electrodeGold
    DiaphragmCeramic
    Sensor shaftGlass
    Shaft diameter12 mm
    Fitting length120 ±3 mm
    Fitting positionVertical up to +25°
    ThreadPG 13.5
    Electrical connectionSN6 plug-in head, rotatable with a ProMinent cable
    Enclosure ratingIP 65
    InstallationBypass: open outlet or return of the sample water into the process line, inline: direct installation into the pipework; fixed or replaceable (replaceable fitting), tank, channel: Immersion in the immersion tube
    Measuring and control equipmentAll DULCOMETER® controllers and solenoid-driven metering pumps types D_4a and delta®
    Typical applicationsSwimming pools, whirlpools, potable water, with disinfectants from electrolysis processes (electrodes directly in the process water)
    Resistance toDisinfectant, by-products from electrolysis process and from ozone treatment process
    Measuring principle, technologyDirect potentiometric measurement, 2 electrodes, gel electrolyte, ceramic diaphragm
    Fitting lengthOrder no.
    RHES-Au-SE120 ±3 mm1044544

    ORP Sensor RHEP-Pt-SE

    ORP sensor optimised for use with clear process water and conditions of up to 80 °C/6 bar

    Your benefits

    • Electrochemical combination electrode: ORP and reference electrode integrated
    • Diaphragm and reference system optimised for exacting process requirements
    • Ceramic diaphragm with special material, optimised size and optimised pore diameter
    • Long service life due to reduced diffusion ("bleeding") of the electrolyte
    • Long service life due to material, which is inert to aggressive chemicals
    • Stable reference system for high pressure / temperature requirements
    • Rotating sensor head sleeve. This means that the cables can remain connected during installation and dismantling of the sensor, avoiding moisture on the plug-in contacts
    • Lead-free glass for advanced and environmentally-friendly production, use and disposal (RoHS-compliant)
    Temperature0 … 80 °C
    Max. pressure6.0 bar
    Min. conductivity150 µS/cm
    ElectrolyteGel containing potassium chloride
    ORP electrodePlatinum
    DiaphragmCeramic
    Sensor shaftGlass
    Shaft diameter15 mm
    Fitting length120 ±3 mm
    Fitting positionVertical up to +25°
    ThreadPG 13.5
    Electrical connectionSN6 plug-in head, rotatable with a ProMinent cable
    Enclosure ratingIP 65
    InstallationBypass: open outlet or return of the sample water into the process line, inline: direct installation into the pipework; fixed or replaceable (replaceable fitting), tank, channel: Immersion in the immersion tube
    Measuring and control equipmentAll DULCOMETER® controllers and solenoid-driven metering pumps types D_4a and delta®
    Typical applicationsSwimming pools during pressurisation for higher temperatures and pressures, potable and industrial water, electroplating,
    Resistance toDisinfectant, not suitable for media containing ozone, cyanides, electrolysis processes (electrodes directly in the sample water)
    Measuring principle, technologyDirect potentiometric measurement, 2 electrodes, gel electrolyte, ceramic diaphragm
    Fitting lengthOrder no.
    RHEP-Pt-SE120 ±3 mm150094

    ORP Sensor RHEP-Au-SE

    ORP sensor optimised for use with clear process water when electrolysis processes are used for disinfection and with ozone treatment and with cyanide detoxification at conditions of up to 80 °C/6 bar

    Your benefits

    • Electrochemical combination electrode: ORP and reference electrode integrated
    • Gold electrode to prevent faults by products from electrolysis processes where the electrodes are immersed directly into the sample water
    • Diaphragm and reference system optimised for exacting process requirements
    • Ceramic diaphragm with special material, optimised size and optimised pore diameter
    • Long service life due to reduced diffusion ("bleeding") of the electrolyte
    • Long service life due to the material, which is inert to aggressive chemicals
    • Stable reference system for high pressure / temperature requirements
    • Rotating sensor head sleeve. This means that the cables can remain connected during installation and dismantling of the sensor, avoiding moisture on the plug-in contacts
    • Lead-free glass for advanced and environmentally-friendly production, use and disposal (RoHS-compliant)
    Temperature0 … 80 °C
    Max. pressure6.0 bar
    Min. conductivity150 µS/cm
    ElectrolyteGel containing potassium chloride
    ORP electrodeGold
    DiaphragmCeramic
    Sensor shaftGlass
    Shaft diameter15 mm
    Fitting length120 ±3 mm
    Fitting positionVertical up to +25°
    ThreadPG 13.5
    Electrical connectionSN6 plug-in head, rotatable with a ProMinent cable
    Enclosure ratingIP 65
    InstallationBypass: open outlet or return of the sample water into the process line, inline: direct installation into the pipework; fixed or replaceable (replaceable fitting), tank, channel: Immersion in the immersion tube
    Measuring and control equipmentAll DULCOMETER® controllers and solenoid-driven metering pumps types D_4a and delta®
    Typical applicationsCyanide detoxification, ozone monitoring
    Resistance toDisinfectant, by-products from electrolysis process and from ozone treatment process, cyanides
    Measuring principle, technologyDirect potentiometric measurement, 2 electrodes, gel electrolyte, ceramic diaphragm
    Fitting lengthOrder no.
    RHEP-Au-SE120 ±3 mm1003875

    ORP Sensor RHEIC-Pt-SE

    ORP sensor optimised for use in industrial waste water/water – with DULCOTEST® sensors.

    Your benefits

    • Mechanically resistant platinum dome permits lasting use even when exposed to abrasive particles
    • Large dirt-repellent Teflon diaphragm protects against unwanted blockage of the reference
    • Double junction reference system for stability with chemically polluted water
    • Large electrolyte reservoir for long service lives
    • Solid high-grade plastic housing with integrated process connection for direct installation in the process with ½" and ¾" NPT thread
    Temperature0 … 80 °C
    Max. pressure6.0 bar
    Min. conductivity50 µS/cm
    Electrolytegel containing potassium chloride with a large KCI reservoir of gel
    DiaphragmPTFE ring diaphragm
    Sensor shaftPlastic
    Sensor shaft Ø17 ±0.2 mm (below the ½" NPT thread), 22 ±0.2 mm (below the ¾" thread)
    Fitting length20 ±0.2 mm (from the lower end of the ½" thread), 60 ±0.2 mm (from the lower end of the ¾" thread)
    Fitting positionVertical up to +25°
    Thread½" and ¾" NPT thread
    Electrical connectionSN6 plug-in head, rotatable with a ProMinent cable
    Enclosure ratingIP 65
    InstallationBypass: open outlet or return of the sample water into the process line, inline: direct installation into the pipework; fixed or replaceable (replaceable fitting), tank, channel: Immersion in the immersion tube
    Measuring and control equipmentAll DULCOMETER® controllers and solenoid-driven metering pumps types D_4a and delta®
    Typical applicationsMunicipal and industrial waste water, cooling water, process water, water in the chemical industry and paper making, general use for water with solid fractions
    Resistance toDisinfectant, solids content (turbid water), water-soluble chemicals
    Measuring principle, technologydirect potentiometric measurement, 2 probes, double junction, gel electrolyte, large Teflon diaphragm, separate temperature measurement for temperature compensation needed
    Order no.
    RHEIC-Pt-SE1082281

    ORP Sensor RHER-Pt-SE

    ORP sensor optimised for use in contaminated water containing solids and for low conductivity of > 50 μS/cm at up to 80 °C/6 bar

    Your benefits

    • Electrochemical combination electrode: ORP and reference electrode integrated
    • The large dirt-repellent Teflon® diaphragm prevents the reference system from becoming blocked up
    • Long service life when solids are present
    • High-viscosity electrolyte combined with a salt reservoir prevents the electrolyte from "bleeding"
    • Long service life without drifts when there is clear water with low conductivity
    • Rotating sensor head sleeve. This means that the cables can remain connected during installation and dismantling of the sensor, avoiding moisture on the plug-in contacts
    • Lead-free glass for advanced and environmentally-friendly production, use and disposal (RoHS-compliant)
    Temperature0 … 80 °C
    Max. pressure6.0 bar
    Min. conductivity50 µS/cm
    ElectrolyteElectrolyte with KCI supplement (salt rings in the reference electrolyte)
    ORP electrodePlatinum
    DiaphragmPTFE ring diaphragm
    Sensor shaftGlass
    Shaft diameter12 mm
    Fitting length120 ±3 mm
    Fitting positionVertical up to +25°
    ThreadPG 13.5
    Electrical connectionSN6 plug-in head/other versions on request
    Enclosure ratingIP 65
    InstallationBypass: open outlet or return of the sample water into the process line, inline: direct installation into the pipework; fixed or replaceable (replaceable fitting), tank, channel: Immersion in the immersion tube
    Measuring and control equipmentAll DULCOMETER® controllers and solenoid-driven metering pumps types D_4a and delta®
    Typical applicationsMunicipal and industrial waste water, cooling water, process water, chemical applications, paper manufacturing. In general for water with a noticeable solid fraction.
    Resistance toDisinfectant, solids content (turbid types of water)
    Measuring principle, technologyDirect potentiometric measurement, 2 electrodes, Teflon ring diaphragm, polymer electrolyte
    Fitting lengthOrder no.
    RHER-Pt-SE120 ±3 mm1002534

    ORP Sensor RHEX-Pt-SE

    ORP sensor optimised for use with contaminated water with a high solids content at 6 bar/100 °C or 16 bar/25 °C

    Your benefits

    • Electrochemical combination electrode: ORP and reference electrode integrated
    • Diaphragm and reference system optimised for extremely high solids content
    • The solid electrolyte makes the diaphragm redundant and prevents the reference system from becoming blocked up
    • Long service life when sludge is present due to lack of a diaphragm
    • Long service life as the solid electrolyte prevents the electrolyte from "bleeding"
    • Stable reference system
    • Rotating sensor head sleeve. This means that the cables can remain connected during installation and dismantling of the sensor, avoiding moisture on the plug-in contacts
    • Lead-free glass for advanced and environmentally-friendly production, use and disposal (RoHS-compliant)
    Temperature0 … 100 °C
    Max. pressure16.0 bar up to 25 °C, 6.0 bar up to 100 °C
    Min. conductivity500 µS/cm
    ElectrolytePolymer containing potassium chloride (solid)
    ORP electrodePlatinum
    DiaphragmCircular gap (solid electrolyte)
    Sensor shaftGlass
    Shaft diameter12 mm
    Fitting length120 ±3 mm
    Fitting positionVertical up to +25°
    ThreadPG 13.5
    Electrical connectionSN6 plug-in head/other versions on request
    Enclosure ratingIP 65
    InstallationBypass: open outlet or return of the sample water into the process line, inline: direct installation into the pipework; fixed or replaceable (replaceable fitting), tank, channel: Immersion in the immersion tube
    Measuring and control equipmentAll DULCOMETER® controllers and solenoid-driven metering pumps types D_4a and delta®
    Typical applicationsWaste water, industrial water, process chemistry, emulsions, suspensions, protein-containing media. In general for water with a high solid fraction. Not suitable for clear media. Not suitable for media with oxidation agents.
    Resistance toSolids content (turbid types of water), sludge, emulsions
    Measuring principle, technologyDirect potentiometric measurement, 2 electrodes, no diaphragm, polymer electrolyte
    Fitting lengthOrder no.
    RHEX-Pt-SE120 ±3 mm305097

    ORP Sensor RHEN-Pt-SE

    Refillable ORP sensor optimised for use with chemically contaminated water at up to 80 °C/without excess pressure

    Your benefits

    • Electrochemical combination electrode: ORP and reference electrode integrated
    • Renewable liquid electrolyte by continuous replenishment from an electrolyte bottle installed above the electrode
    • 1 ceramic diaphragm made of special material, with an optimised size and with optimised pore diameter
    • Long service life in the presence of chemicals dissolved in the water, which could contaminate the reference system
    • Lead-free glass for advanced and environmentally-friendly production, use and disposal (RoHS-compliant)
    Temperature0 … 80 °C
    Max. pressureOperation at atmospheric pressure
    Min. conductivity150 µS/cm
    ElectrolyteKCl electrolyte, refillable
    ORP electrodePlatinum
    DiaphragmCeramic
    Sensor shaftGlass
    Shaft diameter12 mm
    Fitting length120 ±3 mm
    Fitting positionVertical up to +25°
    ThreadPG 13.5
    Electrical connectionSN6 plug-in head/other versions on request
    Enclosure ratingIP 65
    InstallationBy tripod or manually
    Measuring and control equipmentAll DULCOMETER® controllers and solenoid-driven metering pumps types D_4a and delta®
    Typical applicationsWaste water, cooling water, chemically contaminated water, only clear types of water
    Resistance toDisinfectant, chemicals dissolved in water
    Measuring principle, technologyDirect potentiometric measurement, 2 electrodes, liquid electrolyte, 1 ceramic diaphragm
    Fitting lengthOrder no.
    RHEN-Pt-SE120 ±3 mm305091

    Supplied without PE storage tank and tube

    ORP Sensor RHEK-Pt-S

    ORP sensor with plastic shaft for use with manual measuring instruments, optimised for use in potable water treatment, swimming pools/hot tubs at up to 60 °C/3 bar

    Your benefits

    • Electrochemical combination electrode: ORP and reference electrode integrated
    • Diaphragm and reference system optimised for use in swimming pools and for potable water
    • With plastic shaft to prevent glass breakage
    • Mechanical protection of the glass diaphragm
    • Ceramic diaphragm with special material, optimised size and optimised pore diameter
    • Long service life due to reduced diffusion ("bleeding") of the electrolyte
    • Long service life due to the material, which is inert to aggressive disinfectants
    • Stable reference system
    • Lead-free glass for advanced and environmentally-friendly production, use and disposal (RoHS-compliant)
    Temperature0 … 60 °C
    Max. pressureOperation at atmospheric pressure
    Min. conductivity150 µS/cm
    ElectrolyteGel containing potassium chloride
    ORP electrodePlatinum
    DiaphragmCeramic
    Sensor shaftPolycarbonate
    Shaft diameter12 mm
    Fitting length125 ±3 mm
    Fitting positionVertical up to +25°
    ThreadNone
    Electrical connectionSN6 plug-in head, rotatable with a ProMinent cable
    Enclosure ratingIP 65
    InstallationBy tripod or manually
    Measuring and control equipmentAll DULCOMETER® controllers and solenoid-driven metering pumps types D_4a and delta®
    Typical applicationsManual measurement e.g. swimming pools, potable water, aquarium water
    Resistance toDisinfectant
    Measuring principle, technologyDirect potentiometric measurement, 2 electrodes, gel electrolyte, ceramic diaphragm
    Fitting lengthOrder no.
    RHEK-Pt-S125 ±3 mm305052

    ORP Sensor RHEK-Pt-SE

    ORP sensor with plastic shaft, optimised for use in potable water treatment, swimming pools/hot tubs at up to 60 °C/3 bar

    Your benefits

    • Electrochemical combination electrode: ORP and reference electrode integrated
    • Diaphragm and reference system optimised for use in swimming pools and for potable water
    • With plastic shaft to prevent glass breakage
    • Mechanical protection of the glass diaphragm
    • Ceramic diaphragm with special material, optimised size and optimised pore diameter
    • Long service life due to reduced diffusion ("bleeding") of the electrolyte
    • Long service life due to the material, which is inert to aggressive disinfectants
    • Stable reference system
    • Rotating sensor head sleeve. This means that the cables can remain connected during installation and dismantling of the sensor, avoiding moisture on the plug-in contacts
    • Lead-free glass for advanced and environmentally-friendly production, use and disposal (RoHS-compliant)
    Temperature0 … 60 °C
    Max. pressure3.0 bar
    Min. conductivity150 µS/cm
    ElectrolyteGel containing potassium chloride
    ORP electrodePlatinum
    DiaphragmCeramic
    Sensor shaftPolycarbonate
    Shaft diameter12 mm
    Fitting length120 ±3 mm
    Fitting positionVertical up to +25°
    ThreadPG 13.5
    Electrical connectionSN6 plug-in head, rotatable with a ProMinent cable
    Enclosure ratingIP 65
    InstallationBypass: open outlet or return of the sample water into the process line, inline: direct installation into the pipework; fixed or replaceable (replaceable fitting), tank, channel: Immersion in the immersion tube
    Measuring and control equipmentAll DULCOMETER® controllers and solenoid-driven metering pumps types D_4a and delta®
    Typical applicationsSwimming pool,Potable water,Aquariums,
    Resistance toDisinfectant
    Measuring principle, technologyDirect potentiometric measurement, 2 electrodes, gel electrolyte, ceramic diaphragm
    Fitting lengthOrder no.
    RHEK-Pt-SE120 ±3 mm1028459

    ORP Sensor RHEK-L Pt-SE

    ORP sensor with plastic shaft, optimised for vertical to horizontal installation position for use in potable water treatment, swimming pools/hot tubs at up to 60 °C/3 bar

    Your benefits

    • Electrochemical combination electrode: ORP and reference electrode integrated
    • With plastic shaft to prevent glass breakage
    • Horizontal (level) installation possible (90° angle) (usually limited to 0 - 75° angle)
    • Diaphragm and reference system optimised for use in swimming pools and for potable water
    • Ceramic diaphragm with special material, optimised size and optimised pore diameter
    • Long service life due to reduced diffusion ("bleeding") of the electrolyte
    • Rotating sensor head sleeve. This means that the cables can remain connected during installation and dismantling of the sensor, avoiding moisture on the plug-in contacts
    • Long service life due to the material, which is inert to aggressive disinfectants
    • Stable reference system
    Temperature0 … 60 °C
    Max. pressure3.0 bar
    Min. conductivity150 µS/cm
    ElectrolyteGel containing potassium chloride
    ORP electrodePlatinum
    DiaphragmCeramic
    Sensor shaftPolycarbonate
    Shaft diameter12 mm
    Fitting length120 ±3 mm
    Fitting positionvertical to horizontal
    ThreadPG 13.5
    Electrical connectionSN6 plug-in head, rotatable with a ProMinent cable
    Enclosure ratingIP 65
    InstallationBypass: open outlet or return of the sample water into the process line, inline: direct installation into the pipework; fixed or replaceable (replaceable fitting), tank, channel: Immersion in the immersion tube
    Measuring and control equipmentAll DULCOMETER® controllers and solenoid-driven metering pumps types D_4a and delta®
    Typical applicationsSwimming pools, Potable water,Aquariums,Horizontal installation possible.
    Resistance toDisinfectant
    Measuring principle, technologyDirect potentiometric measurement, 2 electrodes, gel electrolyte, ceramic diaphragm
    Fitting lengthOrder no.
    RHEK-L Pt-SE120 ±3 mm1034919

    Downloads for DULCOTEST® ORP Sensors

    More in the Download Centre

    0 Results
    Filter by document type
    Application Example / Reference (0)
    Brochure / Flyer (0)
    Catalogue (0)
    Certificate / Declaration (0)
    Data Sheet (0)
    Drawing / Dimensional Drawing / 3D (0)
    Exploded View / Spare Parts (0)
    Material Safety Data Sheet (0)
    Operating Instructions (0)
    Others (0)
    Press Release (0)
    Publication / Article (0)
    Software (0)
    Wiring Diagram (0)

    Selected filters:

    Matching downloads

    Sort by A to Z
    Load more matches ...
    No more matches available!

    Leider haben wir kein passendes Suchergebnis gefunden.

    Alle Wörter richtig geschrieben?
    Mit weniger oder anderen Suchbegriffen erneut versuchen?

    Please try again later

    Service Unavailable

    The server is temporarily unable to service your request due to maintenance downtime or capacity problems. Please try again later.

    Overview

    Reliable online measurement of ORP – with DULCOTEST® sensors

    Our product line of DULCOTEST® ORP electrodes provides a wide range of sensors for different measuring tasks. The field of application covers everything from simpler water treatment tasks to industrial process waters with more stringent requirements in terms of temperature, pressure, contamination tolerance and chemical resistance.

    The production of our electrodes is subject to very strict quality controls. Routine steps are automated but critical steps are carried out manually under expert supervision. In this way we achieve optimum reproducible quality and cost reduction.

    ORP potential is a measured variable that quantifies the presence of oxidants or reducing agents in a medium under specific conditions on a non-selective basis. Measuring this parameter is relatively inexpensive, but does have some drawbacks: no selective measurement of a specific oxidant / reducing agent, strong dependence on pH, measuring signal tends towards a saturation curve as concentration increases. To measure specific reducing agents and oxidants selectively, without the above disadvantages, suitable amperometric sensors are used (e.g. chlorine sensors).

    Your benefits

    • Precise and reliable measurement enables efficient processes and maximum process reliability
    • The wide choice of sensor types with different constructions makes them reliable components in many applications
    • A long service life is achieved through the use of select quality materials for the measuring electrodes and diaphragms and a stable reference system. This minimises both downtime and maintenance
    • With short storage times and fast delivery, your sensors can be up and running very quickly and you can make maximum use of their service life (all glass sensors start to age as soon as they leave production)
    • Wide range of special versions for fitting length, cable length and plugs for made-to-measure connection to your process
    • Unique label for OEM partners

    Application

    Technical Data

    Downloads

    Contact us

    Ralf Kiermaier

    Vice President Sales and Marketing, ProMinent GmbH

    »Please send us your request! We will contact you shortly.«

    +49 6221 842 0  Send request   

    Close Form

    Your Request

    Personal Information


    Further product +
    Attachment Maximum file size 10 MB
    Upload Next file

    Personal Information


    Please fill in all mandatory fields.
    *Mandatory fields

    Check and Send


    Personal Information:
    Salutation
    Title
    Last name  
    First name  
    Company
    Customer ID
    E-mail address
    Phone
    Street
    House no.
    City  
    Country
    Callback Yes

    Back

    Spare Parts and Accessories

    Matching Products

    1 2 3 4