Flushing Assemblies and Overload Protection Assemblies for Low-Pressure Metering Pumps
Flushing assemblies and overload protection assemblies – also known as fittings
Product description
Cleaned, rinsed – all clear!
Flushing assemblies flush and clean the dosing head The dosing head is where the actual dosing process takes place. more in the glossary, metering line and injection valve and protect the system against deposits. They are installed on the pump's suction connector.
Overload protection assemblies also protect the system against overpressure. They consist of a back pressure valve A back pressure valve has the role of generating a defined stable operating pressure for a metering pump ... more in the glossary that can be adjusted between 1 – 10 bar. They are installed directly on the dosing head The dosing head is where the actual dosing process takes place. more in the glossary.
Your benefits
- Flushing assemblies are available as manual or automatic time-controlled variants
- Overload protection assemblies prevent damage caused by pressure overload.
PCB Flushing Assembly
As a manual or automatic, time-controlled design. Installation, even retrospectively, on the suction connector of the metering pump. Supplied with 2 m flushing pipe and R 3/8 connection nipple. Automatic flushing equipment for the fully automatic flushing of the pump head is possible on request. Material PVC, seal FKM.
Fig. | Order no. | |
---|---|---|
for 6/4, 8/5, 12/6, 12/9 connectors | pk_1_056 | 809925 |
for G 3/4 - DN 10 connectors | pk_1_057 | 809926 |
for G 1 - DN 15 connectors | pk_1_057 | 803960 |
* Caution: The product contains adhesive joints with Tangit. Please note the resistance of Tangit adhesive.
PCB Relief Valve Assembly
PCB overflow device consisting of a back pressure valve, which can be set from 1 – 10 bar, complete with connecting parts, installation directly on the dosing head. Connector size 6 – 12 mm, depending on the pressure connector on the metering pump. Material PVC, seal FKM.
Fig. | Order no. | |
---|---|---|
for 6/4, 8/5, 12/6, 12/9 connectors | pk_1_058 | 809989 |
for G 3/4 - DN 10 connectors | pk_1_059 | 809993 |
for G 1 - DN 15 connectors | pk_1_059 | 914745 |
* Caution: The product contains adhesive joints with Tangit. Please note the resistance of Tangit adhesive.
PPE Flushing Assembly
As a manual or automatic, time-controlled design. Installation, even retrospectively, on the suction connector of the metering pump. Supplied with 2 m flushing pipe and R 3/8 connection nipple. Automatic flushing equipment for the fully automatic flushing of the pump head is possible on request. Material PP, seal EPDM.
Fig. | Order no. | |
---|---|---|
For 6/4, 8/5, 12/6, 12/9 connectors | pk_1_056 | 809909 |
For G 3/4 -DN 10 connector | pk_1_057 | 809917 |
For G 1 -DN 15 connector | pk_1_057 | 809919 |
PPE Relief Valve Assembly
PPE overflow device consisting of a back pressure valve, which can be set from 1 – 10 bar, complete with connecting parts, installation directly on the dosing head. Connector size 6 – 12 mm, depending on the pressure connector on the metering pump. Material PP, seal EPDM.
Fig. | Order no. | |
---|---|---|
For 6/4, 8/5, 12/6, 12/9 connectors | pk_1_058 | 809990 |
G 3/4 - DN 10 connector | pk_1_059 | 809991 |
G 1 - DN 15 connector | pk_1_059 | 809992 |
Downloads for Flushing Assemblies and Overload Protection Assemblies for Low-Pressure Metering Pumps
Service Unavailable
The server is temporarily unable to service your request due to maintenance downtime or capacity problems. Please try again later.
Overview
Cleaned, rinsed – all clear!
Flushing assemblies flush and clean the dosing head The dosing head is where the actual dosing process takes place. more in the glossary, metering line and injection valve and protect the system against deposits. They are installed on the pump's suction connector.
Overload protection assemblies also protect the system against overpressure. They consist of a back pressure valve A back pressure valve has the role of generating a defined stable operating pressure for a metering pump ... more in the glossary that can be adjusted between 1 – 10 bar. They are installed directly on the dosing head The dosing head is where the actual dosing process takes place. more in the glossary.
Your benefits
- Flushing assemblies are available as manual or automatic time-controlled variants
- Overload protection assemblies prevent damage caused by pressure overload.
Technical Data
PCB Flushing Assembly
As a manual or automatic, time-controlled design. Installation, even retrospectively, on the suction connector of the metering pump. Supplied with 2 m flushing pipe and R 3/8 connection nipple. Automatic flushing equipment for the fully automatic flushing of the pump head is possible on request. Material PVC, seal FKM.
Fig. | Order no. | |
---|---|---|
for 6/4, 8/5, 12/6, 12/9 connectors | pk_1_056 | 809925 |
for G 3/4 - DN 10 connectors | pk_1_057 | 809926 |
for G 1 - DN 15 connectors | pk_1_057 | 803960 |
* Caution: The product contains adhesive joints with Tangit. Please note the resistance of Tangit adhesive.
PCB Relief Valve Assembly
PCB overflow device consisting of a back pressure valve, which can be set from 1 – 10 bar, complete with connecting parts, installation directly on the dosing head. Connector size 6 – 12 mm, depending on the pressure connector on the metering pump. Material PVC, seal FKM.
Fig. | Order no. | |
---|---|---|
for 6/4, 8/5, 12/6, 12/9 connectors | pk_1_058 | 809989 |
for G 3/4 - DN 10 connectors | pk_1_059 | 809993 |
for G 1 - DN 15 connectors | pk_1_059 | 914745 |
* Caution: The product contains adhesive joints with Tangit. Please note the resistance of Tangit adhesive.
PPE Flushing Assembly
As a manual or automatic, time-controlled design. Installation, even retrospectively, on the suction connector of the metering pump. Supplied with 2 m flushing pipe and R 3/8 connection nipple. Automatic flushing equipment for the fully automatic flushing of the pump head is possible on request. Material PP, seal EPDM.
Fig. | Order no. | |
---|---|---|
For 6/4, 8/5, 12/6, 12/9 connectors | pk_1_056 | 809909 |
For G 3/4 -DN 10 connector | pk_1_057 | 809917 |
For G 1 -DN 15 connector | pk_1_057 | 809919 |
PPE Relief Valve Assembly
PPE overflow device consisting of a back pressure valve, which can be set from 1 – 10 bar, complete with connecting parts, installation directly on the dosing head. Connector size 6 – 12 mm, depending on the pressure connector on the metering pump. Material PP, seal EPDM.
Fig. | Order no. | |
---|---|---|
For 6/4, 8/5, 12/6, 12/9 connectors | pk_1_058 | 809990 |
G 3/4 - DN 10 connector | pk_1_059 | 809991 |
G 1 - DN 15 connector | pk_1_059 | 809992 |
Downloads
Downloads for Flushing Assemblies and Overload Protection Assemblies for Low-Pressure Metering Pumps
Service Unavailable
The server is temporarily unable to service your request due to maintenance downtime or capacity problems. Please try again later.