Suggestions
Products
See all results for products

Injection Valves for Motor-Driven Metering Pumps

Injection valves precisely meter the flow volumes in a line and are securely sealed from the environment.

Product description

The right support for every metering task

Injection valves are mounted at the point of injection to connect the metering line. They protect against backflow and generate a defined back pressure.

They are equipped with a check ball and a Hastelloy C spring (priming pressure approx. 0.5 bar). They may be fitted in any position.

Materials used as in the pump liquid ends. Injection valve sizes DN 10 and 15 are supplied with union nuts and inserts/hose nozzles.

Important: Injection valves are not absolutely leak-tight shut-off devices!

The benefits for you

  • Used as a check valve – in closed pipe systems to prevent mixing and backflow into the dosing line.
  • Used as a back pressure generator – in systems with a free drain, to generate a defined back pressure.

PVDF Metering Valve Adapter

For the installation of injection valves into pipework with straight unions. The adapter extends into the pipework or storage tank and can be adjusted (shortened) to various cross-sections. Direct contact between the chemicals being metered and the wall can be avoided by installing the adapter. Metering into the centre of the pipework improves how the metering solution is mixed and other aspects.

Material: PVDF

Application

25 °C - max. operating pressure 16 bar

65 °C - max. operating pressure 10 bar

G1

Dim. G

Dim. A

Dim. B

Dimension C

Diameter Ø D

Ø D1

Ø D2

Order no.

mm

mm

mm

mm

mm

mm

* In the kit with 1 x FKM and 1 x EPDM O-ring.

Rp 3/4

R 3/4

93

63

49

32

22

15

1022052

Rp 1

R 1

95

65

50

41

27

18

1022053

G 1 1/4

G 1 1/4 A *

150

119

104

50

27

18

1040722

G 1 1/2

G 1 1/2 A *

171

135

118

60

31

20

1040723

Injection valve PVT-FDA

'Physiologically safe (FDA) in respect of wetted materials' design.

All wetted materials in the 'Physiologically safe (FDA) in respect of wetted materials' design comply with the FDA guidelines.

  • Material PTFE: FDA-No. 21 CFR § 177.1550
  • Material PVDF: FDA-No. 21 CFR § 177.2510

PVDF housing, PTFE seals, with spring-loaded ball check (ceramic), priming pressure approx. 0.5 bar.

DN 10, DN 15With union nut and hose sleeve
DN 20 to DN 40No connection parts

Application

25 °C - max. operating pressure 16 bar

65 °C - max. operating pressure 10 bar

Dim. G

Dim. B

Ø D2

Dim. A

Ø D1

Order no.

mm

mm

mm

mm

DN 10

3/4

40

36

84

16

1078237

DN 15

1

43

48

110

20

1078238

DN 20

1 1/4

55

52

-

1078239

DN 25

1 1/2

61

56

-

1078240

  • pk_2_029
    pk_2_029

Injection valve SST - FDA

'Physiologically safe (FDA) in respect of wetted materials' design.

All wetted materials in the 'Physiologically safe (FDA) in respect of wetted materials' design comply with the FDA guidelines.

FDA guidelines:

  • Material PTFE: FDA No. 21 CFR § 177.1550
  • Material PVDF: FDA No. 21 CFR § 177.2510

Housing made of stainless steel, PVDF ball seat, PTFE seals with non-return sphere (stainless steel material no. 1.4571 / stainless steel no. 1.4581) spring-loaded, priming pressure approx. 0.5 bar.

Application

90 °C - max. operating pressure, see table

DN 10, DN 15With union nut and insert
DN 20 to DN 40No connection parts

Dim. G

Max. pressure

Dim. B

Diameter Ø D2

Dim. A

Diameter Ø D1

Order no.

bar

mm

mm

mm

mm

DN 10

3/4

320

38

36

55

10

1078251

DN 15

1

240

43

48

63

15

1078252

DN 20

1 1/4

130

55

55

-

1078266

DN 25

1 1/2

70

60

58

-

1078267

  • pk_2_030
    pk_2_030

PPE Injection Valve

PP housing, EPDM seals with spring-loaded ball check (glass), priming pressure approx. 0.5 bar.

DN 10, DN 15With union nut and hose sleeve
DN 20 to DN 40No connection parts

Application

25 °C - max. operating pressure 16 bar

50 °C - max. operating pressure 9 bar

Dim. G

Dim. B

Ø D2

Dim. A

Ø D1

Order no.

mm

mm

mm

mm

* PVDF/Teflon design

DN 10

3/4

41

40

83

16

809461

DN 15

1

43

47

108

20

924521

DN 20

1 1/4

55

55

-

803710

DN 25

1 1/2

60

58

-

803711

DN 32 *

2

68

70

-

1002783

DN 40

2 1/4

85

84

-

804761

  • pk_2_029
    pk_2_029

PCB Injection Valve

PVC housing, FKM seals with spring-loaded ball check (glass), priming pressure approx. 0.5 bar.

DN 10, DN 15With union nut and hose sleeve
DN 20 to DN 40No connection parts

Application

25 °C - max. operating pressure 16 bar

45 °C - max. operating pressure 7 bar

Dim. G

Dim. B

Ø D2

Dim. A

Ø D1

Order no.

mm

mm

mm

mm

DN 10

3/4

41

40

83

16

809460

DN 15

1

43

47

108

20

924520

DN 20

1 1/4

55

55

-

803712

DN 25

1 1/2

60

58

-

803713

DN 32

2

68

70

-

1002783

DN 40

2 1/4

85

84

-

804760

  • pk_2_029
    pk_2_029

Injection valve PVT

PVDF housing, PTFE + 25% carbon ball seat, PTFE seals, with spring-loaded ball check (ceramic DN 10 - 20, glass DN 25 - 40), priming pressure approx. 0.5 bar.

Application

25 °C - max. operating pressure 16 bar

65 °C - max. operating pressure 10 bar

Dim. G

Dim. B

Ø D2

Dim. A

Ø D1

Order no.

mm

mm

mm

mm

DN 10

3/4

40

36

84

16

1029476

DN 15

1

43

48

110

20

1029477

DN 20

1 1/4

55

52

-

1029478

DN 25

1 1/2

61

56

-

1029479

DN 32

2

68

70

-

1002783

DN 40

2 1/4

85

81

-

1029480

  • pk_2_029
    pk_2_029

TTT Injection Valve

PTFE housing and seals with spring-loaded ball check (ceramic, glass DN 25), priming pressure approx. 0.5 bar.

DN 10, DN 15With union nut and insert
DN 20 to DN 40No connection parts

Application

25 °C - max. operating pressure 10 bar

90 °C - max. operating pressure 5 bar

Dim. G

Dim. B

Ø D2

Dim. A

Ø D1

Order no.

mm

mm

mm

mm

DN 10

3/4

38

36

57

16

809462

DN 15

1

43

48

63

20

924522

DN 20

1 1/4

55

50

-

803714

DN 25

1 1/2

60

58

-

803715

DN 32

2

68

70

-

1002783

DN 40

2 1/4

85

84

-

804762

  • pk_2_030
    pk_2_030

SST Injection Valve

Housing made of stainless steel, PTFE + 25% carbon ball seat, PTFE seals non-return sphere (stainless steel material no. 1.4571 / stainless steel no. 1.4581) spring-loaded, priming pressure approx. 0.5 bar.

DN 10, DN 15With union nut and insert
DN 20 to DN 40No connection parts

Application

90 °C - max. operating pressure, see table

Dim. G

Max. pressure

Dim. B

Diameter Ø D2

Dim. A

Diameter Ø D1

Order no.

bar

mm

mm

mm

mm

DN 10

3/4

320

38

36

55

10

809463

DN 15

1

240

43

48

63

15

924523

DN 20

1 1/4

130

55

55

-

803716

DN 25

1 1/2

70

60

58

-

803717

DN 32

2

45

69

68

-

1002801

DN 40

2 1/4

25

85

84

-

804763

  • pk_2_030
    pk_2_030

Downloads for Injection Valves for Motor-Driven Metering Pumps

More in the Download Centre

0 Results
Filter by document type
Application Example / Reference (0)
Brochure / Flyer (0)
Catalogue (0)
Certificate / Declaration (0)
Data Sheet (0)
Drawing / Dimensional Drawing / 3D (0)
Exploded View / Spare Parts (0)
Material Safety Data Sheet (0)
Operating Instructions (0)
Others (0)
Press Release (0)
Publication / Article (0)
Software (0)
Wiring Diagram (0)
Selected filters:

Matching downloads

Sort by A to Z
Load more matches ...
No more matches available!

Unfortunately, we did not find an appropriate match.

All words written correctly?
Search again with fewer or different search terms?

Please try again later

Service Unavailable

The server is temporarily unable to service your request due to maintenance downtime or capacity problems. Please try again later.

Overview

The right support for every metering task

Injection valves are mounted at the point of injection to connect the metering line. They protect against backflow and generate a defined back pressure.

They are equipped with a check ball and a Hastelloy C spring (priming pressure approx. 0.5 bar). They may be fitted in any position.

Materials used as in the pump liquid ends. Injection valve sizes DN 10 and 15 are supplied with union nuts and inserts/hose nozzles.

Important: Injection valves are not absolutely leak-tight shut-off devices!

The benefits for you

  • Used as a check valve – in closed pipe systems to prevent mixing and backflow into the dosing line.
  • Used as a back pressure generator – in systems with a free drain, to generate a defined back pressure.

Technical Data

Downloads

Contact us

ProMinent GmbH


+49 6221 842 0   
Send request    

»Please send us your request! We will contact you shortly.«

+49 6221 842 0  Send request   

Matching Products

Motor-Driven Metering Pump Sigma X Control Type – Sigma/ 3 - S3Cb

Capacity range S3Cb: 182 – 1,040 l/h, 12 – 4 bar

The Sigma control type is a smart motor-driven metering pump that is setting new standards in terms of productivity, reliability and safety.

more

Motor-Driven Metering Pump Sigma X Control Type – Sigma/ 2 - S2Cb

Capacity range S2Cb: 61 – 353 l/h, 16 – 4 bar

The Sigma control type is a smart motor-driven metering pump that is setting new standards in terms of productivity, reliability and safety.

more

Motor-Driven Metering Pump Sigma X Control Type – Sigma/ 1 - S1Cb

Capacity range S1Cb: 21 – 117 l/h, 12 – 4 bar

The Sigma control type is a smart motor-driven metering pump that is setting new standards in terms of productivity, reliability and safety.

more

Motor-Driven Metering Pump Sigma/ 3 (Basic Type)

Capacity range 146 – 1,030 l/h, 12 – 4 bar

The patented multi-layer safety diaphragm for excellent process reliability is just one feature of the extremely robust motor-driven metering pump Sigma/3 Basic. It also offers a wide range of power end versions, such as three-phase or 1-phase AC motors, also for use in ATEX areas.

more

Motor-Driven Metering Pump Sigma/ 2 (Basic Type)

Capacity range 50 – 420 l/h, 16 – 4 bar

Robust motor-driven metering pumps like the Sigma/ 2 Basic guarantee excellent process reliability with their patented multi-layer safety diaphragm. The diaphragm metering pump offers a number of power end versions, also suitable for use in areas at risk from explosion.

more

Motor-Driven Metering Pump Sigma/ 1 (Basic type)

Capacity range 17 – 144 l/h, 12 – 4 bar

The Sigma/ 1 Basic is an extremely robust motor-driven metering pump with patented multi-layer safety diaphragm for excellent process reliability. It offers a wide range of power end designs, such as three-phase or 1-phase AC motors, also for use in areas at risk from explosion.

more

News and Events

ProMinent at BrauBeviale 2023 – Metering and disinfection in the beverage industry

September 2023

From November 28th to 30th 28 2023, BrauBeviale in Nuremberg, Germany, will become the meeting place for the entire beverage industry. ProMinent will exhibit at Booth 6-205 in Hall 6.
more

TOP 100 Award: Ranga Yogeshwar honours ProMinent

June 2023

Innovation award for Heidelberg-based dosing technology manufacturer.
more

Olympic swimmer Sarah Wellbrock ends career

June 2023

Internationally renowned swimmer Sarah Wellbrock has officially announced the end of her successful career. As Wellbrock's long-time sponsor, ProMinent, the Heidelberg-based metering technology manufacturer, made an important contribution to her career development.
more

ProMinent is winner of the iF DESIGN AWARD 2023 Gold

May 2023

Metering technology manufacturer ProMinent has won the highest distinction – the iF DESIGN AWARD 2023 Gold – and is now one of the top winners of the world-renowned design label. The winning product: Sensor bypass armature Modular BAMa
more

Low pressure metering pumps now suitable for sensitive food applications

May 2023

ProMinent's low-pressure metering pumps can now be used in direct contact with food. The design and materials used all comply with the European Food Regulation 1935/2004.
more

Using electrolysis to safely disinfect drinking water

May 2023

The challenge: to supply large quantities of germ-free drinking water The solution: using cooking salt and efficient electrolysis systems Alternative to chlorine gas: using electrolysis for disinfection
more

ProMinent Brasil LTDA: New company address

March 2023

ProMinent Brasil LTDA has been growing and due to its expansion, it is with great pleasure that we inform you that as of 03 April 2023, our subsidiary in Brazil will operate and be reachable under a new corporate address. The new address is: Rua José Medeiros de Albuquerque, 355 - Jardim Montreal, São Bernardo do Campo - SP, 09662-030
more

ProMinent inaugurates new offices in Thailand

March 2023

ProMinent Fluid Controls Co. Ltd. recently celebrated the inauguration of its new building in Bangkok, Thailand. The grand opening ceremony was attended by the management of the ProMinent Group.
more

Efficient sugar syrup disinfection thanks to UV treatment

March 2023

Sugar solutions are a key ingredient in soft drink recipes. However, sugar syrup is particularly susceptible to spores, as well as yeast and mould fungi, which must be reliably eliminated during production.
more

ProMinent receives TOP 100 seal

February 2023

ProMinent GmbH from Heidelberg has convinced with its innovative qualities and therefore received the TOP 100 seal for the year 2023. The award ceremony with Ranga Yogeshwar, mentor of the TOP 100, will take place in Augsburg on 23 June.
more

Modern technology for the brewing process

February 2023

...clean water is essential to delicious beer. That’s why Welde draws water from its own well. The long-established brewery uses chlorine dioxide to disinfect its brewing and process water...
more

Andreas Zühlcke becomes Vice President Product Management & Marketing at ProMinent

January 2023

Andreas Zühlcke has been in charge of "Product Management & Marketing" at the metering technology manufacturer ProMinent since September 2022.
more
+49 6221 842 0
Request
Newsletter
Request
Newsletter