Pulsation Damper for Motor-Driven Metering Pumps
Pulsation dampers have an equalising effect. They are used to ensure low-pulsation metering.
Product description
For low-pulsation metering
Pulsation dampers are available in different versions: diaphragm accumulators, in-line dampers, bladder dampers and accumulators.
Pulsation dampers are used for low-pulsation metering and to reduce the flow resistance with long metering lines. They are also ideally suited to viscous media. The gas cushion between the housing and hose is compressed when the metering pump has a pressure stroke, at the same time as a partial volume of the medium is metered into the metering line. The overpressure that forms in the gas cushion causes the compressed volume to be transported on at the following suction stroke and the original, relaxed volume of gas is present again.
Your benefits
- Low-pulsation metering
- Reduces flow resistance with long metering lines
PP Accumulators
Pulsation dampers with a separating diaphragm / bladder between the gas cushion and feed chemical.
Note: The charging pressure of the gas cushion should be approx. 60% to 80% of the operating pressure.
Please note: Only use pulsation dampers in conjunction with an overflow device with adjustable back pressure / relief valve.
Accumulator removable, FKM seals.
Operating range (0.5 / 1 l)
25 °C - max. operating pressure 10 bar
40 °C - max. operating pressure 6 bar
Operating range (2.5 / 5 l)
25 °C - max. operating pressure 6 bar
40 °C - max. operating pressure 4 bar
Volume | Diaphragm material | Connection | L | Ø D | LA | Order no. |
---|---|---|---|---|---|---|
l | mm | mm | mm | |||
0.5 | Butyl | G 1 - DN 15 | 361 | 145 | 100 | 792128 |
0.5 | FKM | G 1 - DN 15 | 361 | 145 | 100 | 792132 |
1.0 | Butyl | G 1 1/4 - DN 20 | 411 | 170 | 100 | 792129 |
1.0 | FKM | G 1 1/4 - DN 20 | 411 | 170 | 100 | 792133 |
2.5 | Butyl | G 1 1/2 - DN 25 | 571 | 170 | 190 | 792130 |
2.5 | FKM | G 1 1/2 - DN 25 | 571 | 170 | 190 | 792134 |
PVC Accumulators
Pulsation dampers with a separating diaphragm / bladder between the gas cushion and feed chemical.
Note: The charging pressure of the gas cushion should be approx. 60 % to 80 % of the operating pressure.
Please note: Only use pulsation dampers in conjunction with an overflow device with adjustable back pressure / relief valve.
Accumulator removable, FKM seals.
Operating range (0.5 / 1 l)
25 °C - max. operating pressure 10 bar
40 °C - max. operating pressure 6 bar
Operating range (2.5 / 5 l)
25 °C - max. operating pressure 6 bar
40 °C - max. operating pressure 4 bar
Volume | Diaphragm material | Connection | L | Ø D | LA | Order no. |
---|---|---|---|---|---|---|
l | mm | mm | mm | |||
0.5 | Butyl | G 1 - DN 15 | 361 | 145 | 100 | 791691 |
0.5 | FKM | G 1 - DN 15 | 361 | 145 | 100 | 791695 |
1.0 | Butyl | G 1 1/4 - DN 20 | 411 | 170 | 100 | 791692 |
1.0 | FKM | G 1 1/4 - DN 20 | 411 | 170 | 100 | 791696 |
2.5* | Butyl | G 1 1/2 - DN 25 | 571 | 170 | 190 | 791693 |
2.5* | FKM | G 1 1/2 - DN 25 | 571 | 170 | 190 | 791697 |
* Caution: The product contains adhesive joints with Tangit. Please note the resistance of Tangit adhesive.
PVC Vacuum Cylinder
Vacuum cylinder as priming aid for long suction line and viscous media. Housing – with transparent middle section. With connector for vacuum pump.
Max. operating pressure: 2 bar at 40 °C operating temperature.
Max. permitted vacuum pressure 300 mbar absolute
With this: Vacuum pump assembly
Volume | Connection | Seal material | L | D | Order no. |
---|---|---|---|---|---|
l | mm | mm | |||
0.5 | G 1 – DN 15 | FKM | 380* | 78 | 243591 |
0.5 | G 1 – DN 15 | EPDM | 380* | 78 | 1025699 |
1.0 | G 1 1/4 – DN 20 | FKM | 440* | 86 | 243592 |
1.0 | G 1 1/4 – DN 20 | EPDM | 440* | 86 | 1025701 |
2.5 | G 1 1/2 – DN 25 | FKM | 520* | 133 | 243593 |
2.5 | G 1 1/2 – DN 25 | EPDM | 520* | 133 | 1025702 |
5.0 | G 2 1/4 – DN 40 | FKM | 630* | 155 | 243594 |
5.0 | G 2 1/4 – DN 40 | EPDM | 630* | 155 | 1025703 |
* Approximate values
* Caution: The product contains adhesive joints with Tangit. Please note the resistance of Tangit adhesive.
Vacuum Pump Assembly / Priming Aid
Material | Seals | Order no. |
---|---|---|
PVC | EPDM | 790019 |
* Caution: The product contains adhesive joints with Tangit. Please note the resistance of Tangit adhesive.
PVDF In-Line Pulsation Damper
Function: Hydropneumatic reservoir with deflection
The PVDF reservoir with PTFE diaphragm offers excellent chemical resistance, making it suitable for a wide range of liquids. The pulsation damper has two liquid connections and can be installed either directly in the pipe or diagonally across with a set of blanking plugs. Deflection in the fluid valve aims the volume flow directly at the diaphragm. This causes the volume flow to come into direct contact with the diaphragm. In this way the trapped gas volume optimally balances out fluctuations in the volume flow.
Please note: Only use pulsation dampers in conjunction with an overflow device with adjustable back pressure / relief valve.
With this: Connector kits / adapter kits
Type | Volume | Max. pressure | Connection | Order no. |
---|---|---|---|---|
l | bar | |||
PD In-line | 0.2 | 10 | G 1 – DN 15 | 1026252 |
PD In-line | 0.5 | 10 | G 1 – DN 15 | 1026736 |
PD-Inline | 0.2 | 16 | G 1 – DN 15 | 1033446 |
PD-Inline | 0.5 | 16 | G 1 – DN 15 | 1033447 |
PD-Inline | 0.2 | 25 | G 1 – DN 15 | 1036154 |
PD In-line | 0.5 | 25 | G 1 – DN 15 | 1036155 |
The priming pressure is approximately 0.6 x the operating pressure. Maximum medium temperature, 65 °C. Connection parts must be ordered separately.
Filling of the reservoir with nitrogen takes place via the VG8 gas filling connector or with compressed air using a standard filling valve (e.g. a car tyre valve).
Attention: | If using combustible liquids, nitrogen must be used as a filling gas. Do not use oxygen under any circumstances! |
Configuration: | DGRL97/23/EC, other acceptances / countries upon request |
Fluid group: | 1 and 2 |
Certificates: | Manufacturer's test certificate M DIN55350-18 |
Wetted materials - FDA physiologically safe | |
Manufacturer: | HYDAC Technology |
Connection/Adapter Kits
Consisting of PTFE-formed composite seal, insert/adapter and union nut.
Connection PD In-line | Connection Piping | Material | Order no. |
---|---|---|---|
G 1 – DN 15 | DN 10 | PP | 1029424 |
G 1 – DN 15 | DN 10 | PVC | 1029425 |
G 1 – DN 15 | DN 10 | PVDF | 1029426 |
G 1 – DN 15 | DN 15 | PP | 1029443 |
G 1 – DN 15 | DN 15 | PVC | 1029444 |
G 1 – DN 15 | DN 15 | PVDF | 1029445 |
G 1 – DN 15 | DN 20 | PP | 1029427 |
G 1 – DN 15 | DN 20 | PVC | 1029428 |
G 1 – DN 15 | DN 20 | PVDF | 1029429 |
G 1 – DN 15 | DN 25 | PP | 1029430 |
G 1 – DN 15 | DN 25 | PVC | 1029431 |
G 1 – DN 15 | DN 25 | PVDF | 1029432 |
Stainless Steel Pulsation Damper
Permitted operating temperature -10 to +80 °C, charging pressure 2 bar (nitrogen). Other bladder / diaphragm materials available on request.
With this: Fastening clips for diaphragm accumulator, stainless steel.
Volume | Max. pressure | Diaphragm material | Connector G | A | Ø D | Order no. |
---|---|---|---|---|---|---|
l | bar | mm | mm | |||
0.16 | 180 | NBR | Rp 1/2 | 124 | 74 | 1008609 |
0.16 | 180 | Butyl | Rp 1/2 | 124 | 74 | 1008610 |
0.16 | 180 | FKM | Rp 1/2 | 124 | 74 | 1008611 |
0.32 | 160 | NBR | Rp 1/2 | 137 | 93 | 1008612 |
0.32 | 160 | Butyl | Rp 1/2 | 137 | 93 | 1008613 |
0.32 | 160 | FKM | Rp 1/2 | 137 | 93 | 1008644 |
0.75 | 140 | NBR | Rp 1/2 | 168 | 121 | 1008645 |
0.75 | 140 | Butyl | Rp 1/2 | 168 | 121 | 1008646 |
0.75 | 140 | FKM | Rp 1/2 | 168 | 121 | 1008647 |
2.00 | 100 | NBR | Rp 3/4 | 224 | 167 | 1008648 |
2.00 | 100 | Butyl | Rp 3/4 | 224 | 167 | 1008649 |
2.00 | 100 | FKM | Rp 3/4 | 224 | 167 | 1008650 |
0.75 | 140 | NBR | Rp 1 | 168 | 121 | 1027617 |
0.75 | 140 | Butyl | Rp 1 | 168 | 121 | 1027618 |
0.75 | 140 | FKM | Rp 1 | 168 | 121 | 1027619 |
2.00 | 100 | NBR | Rp 1 1/2 | 224 | 167 | 1027620 |
2.00 | 100 | Butyl | Rp 1 1/2 | 224 | 167 | 1027621 |
2.00 | 100 | FKM | Rp 1 1/2 | 224 | 167 | 1027622 |
Mounting Clamp for Stainless Steel Pulsation Damper
Volume | Number of Clamps | Ø D | Order no. |
---|---|---|---|
l | mm | ||
0.16 | 1 | 74 | 1008664 |
0.32 | 1 | 93 | 1008665 |
0.75 | 1 | 121 | 1008666 |
2.00 | 1 | 167 | 1008667 |
4.00 | 2 | 170 | 1008668 |
Downloads for Pulsation Damper for Motor-Driven Metering Pumps
Service Unavailable
The server is temporarily unable to service your request due to maintenance downtime or capacity problems. Please try again later.
Overview
For low-pulsation metering
Pulsation dampers are available in different versions: diaphragm accumulators, in-line dampers, bladder dampers and accumulators.
Pulsation dampers are used for low-pulsation metering and to reduce the flow resistance with long metering lines. They are also ideally suited to viscous media. The gas cushion between the housing and hose is compressed when the metering pump has a pressure stroke, at the same time as a partial volume of the medium is metered into the metering line. The overpressure that forms in the gas cushion causes the compressed volume to be transported on at the following suction stroke and the original, relaxed volume of gas is present again.
Your benefits
- Low-pulsation metering
- Reduces flow resistance with long metering lines
Technical Data
PP Accumulators
Pulsation dampers with a separating diaphragm / bladder between the gas cushion and feed chemical.
Note: The charging pressure of the gas cushion should be approx. 60% to 80% of the operating pressure.
Please note: Only use pulsation dampers in conjunction with an overflow device with adjustable back pressure / relief valve.
Accumulator removable, FKM seals.
Operating range (0.5 / 1 l)
25 °C - max. operating pressure 10 bar
40 °C - max. operating pressure 6 bar
Operating range (2.5 / 5 l)
25 °C - max. operating pressure 6 bar
40 °C - max. operating pressure 4 bar
Volume | Diaphragm material | Connection | L | Ø D | LA | Order no. |
---|---|---|---|---|---|---|
l | mm | mm | mm | |||
0.5 | Butyl | G 1 - DN 15 | 361 | 145 | 100 | 792128 |
0.5 | FKM | G 1 - DN 15 | 361 | 145 | 100 | 792132 |
1.0 | Butyl | G 1 1/4 - DN 20 | 411 | 170 | 100 | 792129 |
1.0 | FKM | G 1 1/4 - DN 20 | 411 | 170 | 100 | 792133 |
2.5 | Butyl | G 1 1/2 - DN 25 | 571 | 170 | 190 | 792130 |
2.5 | FKM | G 1 1/2 - DN 25 | 571 | 170 | 190 | 792134 |
PVC Accumulators
Pulsation dampers with a separating diaphragm / bladder between the gas cushion and feed chemical.
Note: The charging pressure of the gas cushion should be approx. 60 % to 80 % of the operating pressure.
Please note: Only use pulsation dampers in conjunction with an overflow device with adjustable back pressure / relief valve.
Accumulator removable, FKM seals.
Operating range (0.5 / 1 l)
25 °C - max. operating pressure 10 bar
40 °C - max. operating pressure 6 bar
Operating range (2.5 / 5 l)
25 °C - max. operating pressure 6 bar
40 °C - max. operating pressure 4 bar
Volume | Diaphragm material | Connection | L | Ø D | LA | Order no. |
---|---|---|---|---|---|---|
l | mm | mm | mm | |||
0.5 | Butyl | G 1 - DN 15 | 361 | 145 | 100 | 791691 |
0.5 | FKM | G 1 - DN 15 | 361 | 145 | 100 | 791695 |
1.0 | Butyl | G 1 1/4 - DN 20 | 411 | 170 | 100 | 791692 |
1.0 | FKM | G 1 1/4 - DN 20 | 411 | 170 | 100 | 791696 |
2.5* | Butyl | G 1 1/2 - DN 25 | 571 | 170 | 190 | 791693 |
2.5* | FKM | G 1 1/2 - DN 25 | 571 | 170 | 190 | 791697 |
* Caution: The product contains adhesive joints with Tangit. Please note the resistance of Tangit adhesive.
PVC Vacuum Cylinder
Vacuum cylinder as priming aid for long suction line and viscous media. Housing – with transparent middle section. With connector for vacuum pump.
Max. operating pressure: 2 bar at 40 °C operating temperature.
Max. permitted vacuum pressure 300 mbar absolute
With this: Vacuum pump assembly
Volume | Connection | Seal material | L | D | Order no. |
---|---|---|---|---|---|
l | mm | mm | |||
0.5 | G 1 – DN 15 | FKM | 380* | 78 | 243591 |
0.5 | G 1 – DN 15 | EPDM | 380* | 78 | 1025699 |
1.0 | G 1 1/4 – DN 20 | FKM | 440* | 86 | 243592 |
1.0 | G 1 1/4 – DN 20 | EPDM | 440* | 86 | 1025701 |
2.5 | G 1 1/2 – DN 25 | FKM | 520* | 133 | 243593 |
2.5 | G 1 1/2 – DN 25 | EPDM | 520* | 133 | 1025702 |
5.0 | G 2 1/4 – DN 40 | FKM | 630* | 155 | 243594 |
5.0 | G 2 1/4 – DN 40 | EPDM | 630* | 155 | 1025703 |
* Approximate values
* Caution: The product contains adhesive joints with Tangit. Please note the resistance of Tangit adhesive.
Vacuum Pump Assembly / Priming Aid
Material | Seals | Order no. |
---|---|---|
PVC | EPDM | 790019 |
* Caution: The product contains adhesive joints with Tangit. Please note the resistance of Tangit adhesive.
PVDF In-Line Pulsation Damper
Function: Hydropneumatic reservoir with deflection
The PVDF reservoir with PTFE diaphragm offers excellent chemical resistance, making it suitable for a wide range of liquids. The pulsation damper has two liquid connections and can be installed either directly in the pipe or diagonally across with a set of blanking plugs. Deflection in the fluid valve aims the volume flow directly at the diaphragm. This causes the volume flow to come into direct contact with the diaphragm. In this way the trapped gas volume optimally balances out fluctuations in the volume flow.
Please note: Only use pulsation dampers in conjunction with an overflow device with adjustable back pressure / relief valve.
With this: Connector kits / adapter kits
Type | Volume | Max. pressure | Connection | Order no. |
---|---|---|---|---|
l | bar | |||
PD In-line | 0.2 | 10 | G 1 – DN 15 | 1026252 |
PD In-line | 0.5 | 10 | G 1 – DN 15 | 1026736 |
PD-Inline | 0.2 | 16 | G 1 – DN 15 | 1033446 |
PD-Inline | 0.5 | 16 | G 1 – DN 15 | 1033447 |
PD-Inline | 0.2 | 25 | G 1 – DN 15 | 1036154 |
PD In-line | 0.5 | 25 | G 1 – DN 15 | 1036155 |
The priming pressure is approximately 0.6 x the operating pressure. Maximum medium temperature, 65 °C. Connection parts must be ordered separately.
Filling of the reservoir with nitrogen takes place via the VG8 gas filling connector or with compressed air using a standard filling valve (e.g. a car tyre valve).
Attention: | If using combustible liquids, nitrogen must be used as a filling gas. Do not use oxygen under any circumstances! |
Configuration: | DGRL97/23/EC, other acceptances / countries upon request |
Fluid group: | 1 and 2 |
Certificates: | Manufacturer's test certificate M DIN55350-18 |
Wetted materials - FDA physiologically safe | |
Manufacturer: | HYDAC Technology |
Connection/Adapter Kits
Consisting of PTFE-formed composite seal, insert/adapter and union nut.
Connection PD In-line | Connection Piping | Material | Order no. |
---|---|---|---|
G 1 – DN 15 | DN 10 | PP | 1029424 |
G 1 – DN 15 | DN 10 | PVC | 1029425 |
G 1 – DN 15 | DN 10 | PVDF | 1029426 |
G 1 – DN 15 | DN 15 | PP | 1029443 |
G 1 – DN 15 | DN 15 | PVC | 1029444 |
G 1 – DN 15 | DN 15 | PVDF | 1029445 |
G 1 – DN 15 | DN 20 | PP | 1029427 |
G 1 – DN 15 | DN 20 | PVC | 1029428 |
G 1 – DN 15 | DN 20 | PVDF | 1029429 |
G 1 – DN 15 | DN 25 | PP | 1029430 |
G 1 – DN 15 | DN 25 | PVC | 1029431 |
G 1 – DN 15 | DN 25 | PVDF | 1029432 |
Stainless Steel Pulsation Damper
Permitted operating temperature -10 to +80 °C, charging pressure 2 bar (nitrogen). Other bladder / diaphragm materials available on request.
With this: Fastening clips for diaphragm accumulator, stainless steel.
Volume | Max. pressure | Diaphragm material | Connector G | A | Ø D | Order no. |
---|---|---|---|---|---|---|
l | bar | mm | mm | |||
0.16 | 180 | NBR | Rp 1/2 | 124 | 74 | 1008609 |
0.16 | 180 | Butyl | Rp 1/2 | 124 | 74 | 1008610 |
0.16 | 180 | FKM | Rp 1/2 | 124 | 74 | 1008611 |
0.32 | 160 | NBR | Rp 1/2 | 137 | 93 | 1008612 |
0.32 | 160 | Butyl | Rp 1/2 | 137 | 93 | 1008613 |
0.32 | 160 | FKM | Rp 1/2 | 137 | 93 | 1008644 |
0.75 | 140 | NBR | Rp 1/2 | 168 | 121 | 1008645 |
0.75 | 140 | Butyl | Rp 1/2 | 168 | 121 | 1008646 |
0.75 | 140 | FKM | Rp 1/2 | 168 | 121 | 1008647 |
2.00 | 100 | NBR | Rp 3/4 | 224 | 167 | 1008648 |
2.00 | 100 | Butyl | Rp 3/4 | 224 | 167 | 1008649 |
2.00 | 100 | FKM | Rp 3/4 | 224 | 167 | 1008650 |
0.75 | 140 | NBR | Rp 1 | 168 | 121 | 1027617 |
0.75 | 140 | Butyl | Rp 1 | 168 | 121 | 1027618 |
0.75 | 140 | FKM | Rp 1 | 168 | 121 | 1027619 |
2.00 | 100 | NBR | Rp 1 1/2 | 224 | 167 | 1027620 |
2.00 | 100 | Butyl | Rp 1 1/2 | 224 | 167 | 1027621 |
2.00 | 100 | FKM | Rp 1 1/2 | 224 | 167 | 1027622 |
Mounting Clamp for Stainless Steel Pulsation Damper
Volume | Number of Clamps | Ø D | Order no. |
---|---|---|---|
l | mm | ||
0.16 | 1 | 74 | 1008664 |
0.32 | 1 | 93 | 1008665 |
0.75 | 1 | 121 | 1008666 |
2.00 | 1 | 167 | 1008667 |
4.00 | 2 | 170 | 1008668 |
Downloads
Downloads for Pulsation Damper for Motor-Driven Metering Pumps
Service Unavailable
The server is temporarily unable to service your request due to maintenance downtime or capacity problems. Please try again later.