Plunger Metering Pump Meta
Capacity range 6 – 59 l/h, 216 – 52 bar
The extremely high-performance Meta is a plunger metering pump with the option of adjusting the pump capacity in 0.2% increments. It offers a wide range of power end versions, such as three-phase or 1-phase AC motors, even for Exe and Exde areas with ATEX certification.
Product description
Meta plunger pump – durable and high-performance
The Meta (MTKa) is a plunger metering pump, the pump capacity of which can be precisely adjusted in 0.2% increments, either manually or optionally with an electric actuator An actuator is used to move the adjustment spindle for the stroke length adjustment of a ... more in the glossary or control drive. A wide range of power end versions is available for use in areas at risk from explosion with ATEX certification.
Your benefits
Excellent process safety and reliability:
- Metering reproducibility is better than ± 0.5 % within the 10 – 100% stroke length range under defined conditions and with correct installation
Flexible adaptation to the process:
- Wide range of power end versions, also for use in Exe and Exde areas and different flange designs for the use of customised motors
- Customised designs are available on request
Field of application
- Volume-proportional metering of chemicals in the treatment of boiler feed water
- Metering of reactants and catalysts in the chemical industry
- Level-dependent metering of auxiliary agents in industrial production engineering, for instance hot wax metering in the production of adhesive strips
Technical Details
- Stroke length: 15 mm,
- Stroke length adjustment range: 0 – 100%
- Stroke length adjustment: manually by self-locking rotary dial in 0.2% increments (optionally with electric actuator or control drive)
- Metering reproducibility is better than ± 1% within the 10-100% stroke length adjustment range under certain defined conditions and with proper installation
- Wetted materials: Stainless steel 1.4571/1.4404
- High-performance oxide ceramic plunger
- A wide range of power end versions is available: Three-phase standard motor, 1-phase AC motor, motors for use in areas at risk from explosion and different flange designs for use in customer-specific motors
- Degree of protection IP 55
- Fibreglass-reinforced plastic housing
- Provide suitable overload protection in all plunger metering pumps during installation for safety reasons.
Control of Meta Plunger Metering Pumps
Speed controllers in metal housing (Identity code characteristic Z)
Frequency changer built into IP 54 protective housing and main switch designed for max. 0.37 kW motor output.
Externally controlled with 0/4-20 mA / 0-10 V to correspond to 0-50 (60) Hz output frequency.
Integrated controller with versatile functions e.g. switching between external/internal control. With internal control, frequency input is via arrow keys. Multi lingual fault message display and motor temperature monitoring (thermistor-protection).
The speed controller assembly consists of a speed controller and a variable speed motor (see also identity code characteristic R).
Type MTKa | With 1500 rpm motor at 50 Hz | With 1800 rpm motor at 60 Hz | Suction lift | Perm. pre-pressure suction side | Connector Suction/Discharge Side | Motor rating | Shipping weight | Plunger Ø | |||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Delivery rate at max. back pressure | Max. stroke rate | Delivery rate at max. back pressure | Max. stroke rate | ||||||||||
bar | l/h | ml/stroke | Strokes/min | psi | l/h/gph (US) | Strokes/min | m WC | bar | Rp-DN | W | kg | mm | |
21606 | 216 | 6.1 | 1.42 | 72 | 3,130 | 7.3/1.9 | 86 | 4.0 | 108 | 1/4 | 180 | 18 | 12 |
24006 | 240 | 6.1 | 1.42 | 72 | 3,477 | 7.3/1.9 | 86 | 4.0 | 120 | 1/4 | 370 | 20 | 12 |
16208 | 162 | 8.1 | 1.42 | 96 | 2,347 | 9.8/2.6 | 115 | 4.0 | 81 | 1/4 | 180 | 18 | 12 |
22508 | 225 | 8.1 | 1.42 | 96 | 3,260 | 9.8/2.6 | 115 | 4.0 | 112.5 | 1/4 | 370 | 20 | 12 |
12910 | 129 | 10.2 | 1.42 | 120 | 1,878 | 12.2/3.2 | 144 | 4.0 | 64.5 | 1/4 | 180 | 18 | 12 |
21610 | 216 | 10.2 | 1.42 | 120 | 3,130 | 12.2/3.2 | 144 | 4.0 | 108 | 1/4 | 370 | 20 | 12 |
10812 | 108 | 12.2 | 1.42 | 144 | 1,565 | 14.7/3.9 | 173 | 4.0 | 54 | 1/4 | 180 | 18 | 12 |
21012 | 210 | 12.2 | 1.42 | 144 | 3,043 | 14.7/3.9 | 173 | 4.0 | 105 | 1/4 | 370 | 20 | 12 |
10213 | 102 | 13.0 | 3.01 | 72 | 1,479 | 15.6/4.1 | 86 | 4.0 | 51 | 1/4 | 180 | 18 | 17 |
11313 | 113 | 13.0 | 3.01 | 72 | 1,644 | 15.6/4.1 | 86 | 4.0 | 56.5 | 1/4 | 370 | 20 | 17 |
07617 | 76 | 17.3 | 3.01 | 96 | 1,109 | 20.8/5.5 | 115 | 4.0 | 38 | 1/4 | 180 | 18 | 17 |
10617 | 106 | 17.3 | 3.01 | 96 | 1,541 | 20.8/5.5 | 115 | 4.0 | 53 | 1/4 | 370 | 20 | 17 |
06122 | 61 | 21.7 | 3.01 | 120 | 888 | 26.0/6.9 | 144 | 4.0 | 30.5 | 1/4 | 180 | 18 | 17 |
10222 | 102 | 21.7 | 3.01 | 120 | 1,479 | 26.0/6.9 | 144 | 4.0 | 51 | 1/4 | 370 | 20 | 17 |
05126 | 51 | 26.0 | 3.01 | 144 | 740 | 31.2/8.2 | 173 | 4.0 | 25.5 | 1/4 | 180 | 18 | 17 |
09926 | 99 | 26.0 | 3.01 | 144 | 1,438 | 31.2/8.2 | 173 | 4.0 | 49.5 | 1/4 | 370 | 20 | 17 |
05425 | 54 | 24.6 | 5.71 | 72 | 782 | 29.5/7.8 | 86 | 4.0 | 27 | 3/8 | 180 | 18 | 23 |
06025 | 60 | 24.6 | 5.71 | 72 | 869 | 29.5/7.8 | 86 | 4.0 | 30 | 3/8 | 370 | 20 | 23 |
04033 | 40 | 32.8 | 5.71 | 96 | 587 | 39.4/10.4 | 115 | 4.0 | 20 | 3/8 | 180 | 18 | 23 |
05633 | 56 | 32.8 | 5.71 | 96 | 815 | 39.4/10.4 | 115 | 4.0 | 28 | 3/8 | 370 | 20 | 23 |
03241 | 32 | 41.1 | 5.71 | 120 | 469 | 49.3/13.0 | 144 | 4.0 | 16 | 3/8 | 180 | 18 | 23 |
05441 | 54 | 41.1 | 5.71 | 120 | 782 | 49.3/13.0 | 144 | 4.0 | 27 | 3/8 | 370 | 20 | 23 |
02749 | 27 | 49.3 | 5.71 | 144 | 391 | 59.2/15.6 | 173 | 4.0 | 13.5 | 3/8 | 180 | 18 | 23 |
05249 | 52 | 49.3 | 5.71 | 144 | 761 | 59.2/15.6 | 173 | 4.0 | 26 | 3/8 | 370 | 20 | 23 |
Materials in Contact With the Medium
Material | Dosing head | Suction/pressure connector | Seals | Valve balls | Valve seat | Plunger |
---|---|---|---|---|---|---|
SST | Stainless steel 1.4404 | Stainless steel 1.4404 | PTFE or | Ceramic | Stainless steel 1.4404 | Ceramic |
PTFE + 25 % carbon |
Motor Data
Identity code specification | Power supply | Remarks | |||
---|---|---|---|---|---|
S | 3-phase, IP 55 | 220 – 240 V/380 – 420 V 250 – 280 V/440 – 480 V | 50 Hz 60 Hz | 0.18/0.37 kW 0.18/0.37 kW | |
R | 3-phase, IP 55 | 230 V/400 V | 50/60 Hz | 0.37 kW | with PTC, speed control range 1:20 with external fan 1-phase 230 V; 50/60 Hz |
M | 1-phase AC, IP 55 | 230 V ± 5 % | 50/60 Hz | 0.37 kW | |
N | 1-phase AC, IP 55 | 115 V ± 5 % | 60 Hz | 0.37 kW | |
L1 | 3-phase, II 2G Ex e II T3 | 220 – 240 V/380 – 420 V | 50 Hz | 0.18/0.37 kW | |
L2 | 3-phase, II 2G Ex de IIC T4 | 220 – 240 V/380 – 420 V | 50 Hz | 0.18/0.37 kW | with PTC, speed control range 1:5 |
P1 | 3-phase, II 2G Ex e II T3 | 250 – 280 V/440 – 480 V | 60 Hz | 0.18/0.37 kW | |
P2 | 3-phase, II 2G Ex de IIC T4 | 250 – 280 V/440 – 480 V | 60 Hz | 0.18/0.37 kW | with PTC, speed control range 1:5 |
The motor power is dependent on the pump type (see technical data). |
Motor data sheets can be requested for more information. |
Special motors or special motor flanges are available on request. |
The motors are designed in compliance with the Ecodesign Directive 2009/125/EC.
Information for use in areas at risk from explosion
Only use pumps with the appropriate labelling in line with the ATEX Directive 2014/34/EU in premises at risk from explosion. Ensure that the explosion group, category and degree of protection specified on the label corresponds to or is better than the conditions prevalent in the intended field of application.
Downloads for Plunger Metering Pump Meta
Service Unavailable
The server is temporarily unable to service your request due to maintenance downtime or capacity problems. Please try again later.
Overview
Meta plunger pump – durable and high-performance
The Meta (MTKa) is a plunger metering pump, the pump capacity of which can be precisely adjusted in 0.2% increments, either manually or optionally with an electric actuator An actuator is used to move the adjustment spindle for the stroke length adjustment of a ... more in the glossary or control drive. A wide range of power end versions is available for use in areas at risk from explosion with ATEX certification.
Your benefits
Excellent process safety and reliability:
- Metering reproducibility is better than ± 0.5 % within the 10 – 100% stroke length range under defined conditions and with correct installation
Flexible adaptation to the process:
- Wide range of power end versions, also for use in Exe and Exde areas and different flange designs for the use of customised motors
- Customised designs are available on request
Application
Field of application
- Volume-proportional metering of chemicals in the treatment of boiler feed water
- Metering of reactants and catalysts in the chemical industry
- Level-dependent metering of auxiliary agents in industrial production engineering, for instance hot wax metering in the production of adhesive strips
Technical Data
Technical Details
- Stroke length: 15 mm,
- Stroke length adjustment range: 0 – 100%
- Stroke length adjustment: manually by self-locking rotary dial in 0.2% increments (optionally with electric actuator or control drive)
- Metering reproducibility is better than ± 1% within the 10-100% stroke length adjustment range under certain defined conditions and with proper installation
- Wetted materials: Stainless steel 1.4571/1.4404
- High-performance oxide ceramic plunger
- A wide range of power end versions is available: Three-phase standard motor, 1-phase AC motor, motors for use in areas at risk from explosion and different flange designs for use in customer-specific motors
- Degree of protection IP 55
- Fibreglass-reinforced plastic housing
- Provide suitable overload protection in all plunger metering pumps during installation for safety reasons.
Control of Meta Plunger Metering Pumps
Speed controllers in metal housing (Identity code characteristic Z)
Frequency changer built into IP 54 protective housing and main switch designed for max. 0.37 kW motor output.
Externally controlled with 0/4-20 mA / 0-10 V to correspond to 0-50 (60) Hz output frequency.
Integrated controller with versatile functions e.g. switching between external/internal control. With internal control, frequency input is via arrow keys. Multi lingual fault message display and motor temperature monitoring (thermistor-protection).
The speed controller assembly consists of a speed controller and a variable speed motor (see also identity code characteristic R).
Type MTKa | With 1500 rpm motor at 50 Hz | With 1800 rpm motor at 60 Hz | Suction lift | Perm. pre-pressure suction side | Connector Suction/Discharge Side | Motor rating | Shipping weight | Plunger Ø | |||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Delivery rate at max. back pressure | Max. stroke rate | Delivery rate at max. back pressure | Max. stroke rate | ||||||||||
bar | l/h | ml/stroke | Strokes/min | psi | l/h/gph (US) | Strokes/min | m WC | bar | Rp-DN | W | kg | mm | |
21606 | 216 | 6.1 | 1.42 | 72 | 3,130 | 7.3/1.9 | 86 | 4.0 | 108 | 1/4 | 180 | 18 | 12 |
24006 | 240 | 6.1 | 1.42 | 72 | 3,477 | 7.3/1.9 | 86 | 4.0 | 120 | 1/4 | 370 | 20 | 12 |
16208 | 162 | 8.1 | 1.42 | 96 | 2,347 | 9.8/2.6 | 115 | 4.0 | 81 | 1/4 | 180 | 18 | 12 |
22508 | 225 | 8.1 | 1.42 | 96 | 3,260 | 9.8/2.6 | 115 | 4.0 | 112.5 | 1/4 | 370 | 20 | 12 |
12910 | 129 | 10.2 | 1.42 | 120 | 1,878 | 12.2/3.2 | 144 | 4.0 | 64.5 | 1/4 | 180 | 18 | 12 |
21610 | 216 | 10.2 | 1.42 | 120 | 3,130 | 12.2/3.2 | 144 | 4.0 | 108 | 1/4 | 370 | 20 | 12 |
10812 | 108 | 12.2 | 1.42 | 144 | 1,565 | 14.7/3.9 | 173 | 4.0 | 54 | 1/4 | 180 | 18 | 12 |
21012 | 210 | 12.2 | 1.42 | 144 | 3,043 | 14.7/3.9 | 173 | 4.0 | 105 | 1/4 | 370 | 20 | 12 |
10213 | 102 | 13.0 | 3.01 | 72 | 1,479 | 15.6/4.1 | 86 | 4.0 | 51 | 1/4 | 180 | 18 | 17 |
11313 | 113 | 13.0 | 3.01 | 72 | 1,644 | 15.6/4.1 | 86 | 4.0 | 56.5 | 1/4 | 370 | 20 | 17 |
07617 | 76 | 17.3 | 3.01 | 96 | 1,109 | 20.8/5.5 | 115 | 4.0 | 38 | 1/4 | 180 | 18 | 17 |
10617 | 106 | 17.3 | 3.01 | 96 | 1,541 | 20.8/5.5 | 115 | 4.0 | 53 | 1/4 | 370 | 20 | 17 |
06122 | 61 | 21.7 | 3.01 | 120 | 888 | 26.0/6.9 | 144 | 4.0 | 30.5 | 1/4 | 180 | 18 | 17 |
10222 | 102 | 21.7 | 3.01 | 120 | 1,479 | 26.0/6.9 | 144 | 4.0 | 51 | 1/4 | 370 | 20 | 17 |
05126 | 51 | 26.0 | 3.01 | 144 | 740 | 31.2/8.2 | 173 | 4.0 | 25.5 | 1/4 | 180 | 18 | 17 |
09926 | 99 | 26.0 | 3.01 | 144 | 1,438 | 31.2/8.2 | 173 | 4.0 | 49.5 | 1/4 | 370 | 20 | 17 |
05425 | 54 | 24.6 | 5.71 | 72 | 782 | 29.5/7.8 | 86 | 4.0 | 27 | 3/8 | 180 | 18 | 23 |
06025 | 60 | 24.6 | 5.71 | 72 | 869 | 29.5/7.8 | 86 | 4.0 | 30 | 3/8 | 370 | 20 | 23 |
04033 | 40 | 32.8 | 5.71 | 96 | 587 | 39.4/10.4 | 115 | 4.0 | 20 | 3/8 | 180 | 18 | 23 |
05633 | 56 | 32.8 | 5.71 | 96 | 815 | 39.4/10.4 | 115 | 4.0 | 28 | 3/8 | 370 | 20 | 23 |
03241 | 32 | 41.1 | 5.71 | 120 | 469 | 49.3/13.0 | 144 | 4.0 | 16 | 3/8 | 180 | 18 | 23 |
05441 | 54 | 41.1 | 5.71 | 120 | 782 | 49.3/13.0 | 144 | 4.0 | 27 | 3/8 | 370 | 20 | 23 |
02749 | 27 | 49.3 | 5.71 | 144 | 391 | 59.2/15.6 | 173 | 4.0 | 13.5 | 3/8 | 180 | 18 | 23 |
05249 | 52 | 49.3 | 5.71 | 144 | 761 | 59.2/15.6 | 173 | 4.0 | 26 | 3/8 | 370 | 20 | 23 |
Materials in Contact With the Medium
Material | Dosing head | Suction/pressure connector | Seals | Valve balls | Valve seat | Plunger |
---|---|---|---|---|---|---|
SST | Stainless steel 1.4404 | Stainless steel 1.4404 | PTFE or | Ceramic | Stainless steel 1.4404 | Ceramic |
PTFE + 25 % carbon |
Motor Data
Identity code specification | Power supply | Remarks | |||
---|---|---|---|---|---|
S | 3-phase, IP 55 | 220 – 240 V/380 – 420 V 250 – 280 V/440 – 480 V | 50 Hz 60 Hz | 0.18/0.37 kW 0.18/0.37 kW | |
R | 3-phase, IP 55 | 230 V/400 V | 50/60 Hz | 0.37 kW | with PTC, speed control range 1:20 with external fan 1-phase 230 V; 50/60 Hz |
M | 1-phase AC, IP 55 | 230 V ± 5 % | 50/60 Hz | 0.37 kW | |
N | 1-phase AC, IP 55 | 115 V ± 5 % | 60 Hz | 0.37 kW | |
L1 | 3-phase, II 2G Ex e II T3 | 220 – 240 V/380 – 420 V | 50 Hz | 0.18/0.37 kW | |
L2 | 3-phase, II 2G Ex de IIC T4 | 220 – 240 V/380 – 420 V | 50 Hz | 0.18/0.37 kW | with PTC, speed control range 1:5 |
P1 | 3-phase, II 2G Ex e II T3 | 250 – 280 V/440 – 480 V | 60 Hz | 0.18/0.37 kW | |
P2 | 3-phase, II 2G Ex de IIC T4 | 250 – 280 V/440 – 480 V | 60 Hz | 0.18/0.37 kW | with PTC, speed control range 1:5 |
The motor power is dependent on the pump type (see technical data). |
Motor data sheets can be requested for more information. |
Special motors or special motor flanges are available on request. |
The motors are designed in compliance with the Ecodesign Directive 2009/125/EC.
Information for use in areas at risk from explosion
Only use pumps with the appropriate labelling in line with the ATEX Directive 2014/34/EU in premises at risk from explosion. Ensure that the explosion group, category and degree of protection specified on the label corresponds to or is better than the conditions prevalent in the intended field of application.
Downloads
Downloads for Plunger Metering Pump Meta
Service Unavailable
The server is temporarily unable to service your request due to maintenance downtime or capacity problems. Please try again later.