The chlorine gas metering system DULCO^®Vaq type PM 3610 C for automatically controlled metering of chlorine gas. Its simple operation offers safety and precision in accordance with the current state of technology and in line with DIN standards.

The electrical Emergency Stop system provides for additional safety to personnel and equipment by automatically closing off the chlorine gas supply. With its own control unit and uninterrupted power supply, it reliably closes off the chlorine gas sources even in the event of a power failure.

The application range of the DULCO^®Trans depends on the chemical resistance of the materials used.

Controller DULCOMARIN^® II for water analysis: Green technology with energy and chemical saving function. Control of circulating pumps and filter backwash is possible.

As a controller in water analysis, the DULCOMETER^® Compact is the correct controller for control tasks that require only a 1 way control.

The controller DULCOMETER^® D1Cb/D1Cc can be used for control tasks in potable water treatment, waste water treatment and many other areas. Safe, convenient and clear, thanks to the large illuminated graphic display, plain text operating menu and pH sensor monitoring.

PE storage tanks produced in a rotation process. ProMinent metering pumps, suction lances and stirrers can all be added. The stackable PE collecting pans are available in matching sizes.

ORP measurements with DULCOTEST^® sensors: Precise, reliable and application-adapted measured values in real time. Can be used in water treatment or industrial process waters with strict requirements.

pH measurements with DULCOTEST^® sensors: Precise, reliable and application-adapted measured values in real time. Control, regulate and monitor chemical processes with the aid of precise measured values.

Bromine measurement with DULCOTEST^® sensors: Safe metering in disinfection processes with bromine. The robustness of the sensors makes them suitable for wide range of water qualities.

The application-based DULCOTEST^® sensors for free chlorine deliver precise measured values and a high degree of monitoring and process reliability in any disinfection application.

Reliably measure total chlorine with the versatile DULCOTEST^® sensors for total chlorine. Accurate measured values and a high degree of monitoring and process reliability are guaranteed.

CHLORINSITU^® IIa is a compact on-site electrolysis system for the production of a low-chlorate hypochlorite solution from sodium chloride and electrical energy. A key advantage is its simple process management and excellent system safety through integral ventilation and bleeding.

Injectors for chlorine gas, series DULCO^®Vaq, generate a stable vacuum even at high operating pressures.

The measuring and control system DULCOMARIN^® 3 is your digital link to the technology of the future. It controls the entire range of swimming pools – from adventure pools to private pools. The system is operated using the large 7” touch display.

The chlorine metering system DULCODOS^® Pool Basic is a complete solution for private swimming pools where the chlorine content is controlled using the low-maintenance measurement of the ORP potential.

The chlorine metering system DULCODOS^® Pool Comfort is the convenient solution for pH adjustment and disinfection of swimming pools with liquid chlorine products. Remote access is possible via LAN interface.

Chlorine metering system for individual adjustment and monitoring of all common hygiene auxiliary parameters in public pools. DULCODOS^® Pool Professional ensures crystal-clear water quality and lowers operating costs thanks to Eco!Mode.

Chlorine-free water treatment system for environmentally operated private pools. Safe water disinfection with active oxygen as a turnkey complete solution.

The motorised control valve for chlorine gas DULCO^®Vaq type PM 3531 ensures precise electronically controlled metering of the chlorine gas flow. The linear control characteristic is guaranteed by an externally controlled step motor.

The motor-driven metering pump alpha is the metering pump for liquid media and the optimum solution for simple applications. Robust, low-noise, chemical-resistant, with precise metering and good suction capacity.

The peristaltic pump DULCO^®flex DF2a meters chemicals functionally, cost-effectively and quietly – ideal for use in swimming pools, hot tubs, and in spa and wellness facilities.

The peristaltic pump DULCO^®flex DF4a for metering flocculants and activated charcoal treats water precisely and accurately. It is ideal for use in swimming pools, hot tubs or spa and wellness facilities. An operating pressure up to 4 bar is possible.

Photometers measure nearly all disinfectants and the pH value based on the photometric principle. They are portable, compact and make safe, simple measurement possible.

All-purpose solenoid-driven metering pump for metering liquid media in water treatment and chemical processes: Solenoid-driven metering pump Beta^®. Cost-effective, overload-proof, adaptable to existing signal transducers.

A high-end diaphragm metering pump with regulated solenoid drive. Virtually wear-free, extremely economical and with a self-bleeding dosing head design.

The vacuum dosing regulator DULCO^®Vaq CGVa meters chlorine gas cost-effectively and highly efficiently. Maximum possible operating safety and reliability is ensured by the use of high-quality materials, such as tantalum and silver.

Vacuum switches DULCO^®Vaq PM 400 and 440 automatically and reliably switch between two chlorine gas storage tanks. They therefore ensure an uninterrupted chlorine gas supply, even if a chlorine gas storage tank becomes empty.

The Flemish Ministry of Health only permits approved disinfectants and disinfection processes for protection against legionella. Chlorine dioxide systems Bello Zon® have been certified for this since the beginning of 2018.

Markus Rösch, Divisional Manager for Pool and Wellness at ProMinent Deutschland, provided this positive summing up on the last day of aquanale: “The huge interest shown over the last four days has far exceeded our expectations: “We welcomed many interested visitors and received very positive feedback on the new products we presented.

Ternary oxide systems containing lithium guarantee a high energy density, long service life and high number of charge cycles for lithium storage batteries. Metering systems ensure the quality of the precursors needed for production.

The Carolus Thermen in Aachen in Germany, named after king Charles the Great, are an unparalleled world of wellness. The demanding job of treating the thermal water is handled by our modern electrolysis system and the powerful measuring and control system.

Bacteria and cross-contamination set off all the alarm bells in food production! This article shows how manufacturers of poultry and salad products have used chlorine dioxide systems from ProMinent to efficiently overcome these problems.

Magnificent mountain panorama under cloudless blue skies – guests at the Spa Hotel Tanneck in Allgäu are treated to a pool landscape with precisely this view. Efficient systems from ProMinent ensure a continuous supply of water of incomparable quality.

At drinktec 2017 between 11 and 15 September 2017 in Munich, ProMinent will present its world first, the UV system Dulcodes LP, at stand 316 in hall B3. The system adapts its output according to flow and temperature, even when these parameters change rapidly. The UV system designed especially for use in the food and beverage industry satisfies hygienic design requirements, is CIP-compatible and is fitted with materials compliant with the FDA.

Standard disinfection processes produce chlorate concentrations far above the desired minimum limits. The alternative is DULCO®Lyse, which guarantees a chlorate level far below manufacturers' specifications. ProMinent presents its optimised diaphragm electrolysis process on stand 316 in hall B3 at drinktec 2017. The trade fair runs between 11 and 15 September 2017 in Munich.

ProMinent is presenting ready-wired metering stations DULCODOS® F&B on stand 316 in hall B3 at drinktec 2017, which runs between 11 and 15 September 2017. These metering systems have been specifically developed for the food and beverage sector and are used to meter cleaning agents, disinfectants and additives, as well as additives and auxiliary agents with ultimate precision. They correspond to the fields of application of Directive (EC) No. 1935/2004.

Are you looking for integral concepts or processes for sustainable water treatment? You will be spoilt for choice at ProMinent. True to the motto "Ready for you. Anytime, anywhere", innovative solutions for efficient water disinfection and hygienic production in breweries, the manufacture of soft drinks and the liquid food industry will be on display on stand 316 in hall B3.

The air contains dust which is constantly being swirled around. Then there's water. And high-pressure jets from all directions, for minutes at a time. Harsh conditions – but no problem for the gamma/ X, because it now offers IP 66 protection.

At the end of HANNOVER MESSE 2017, Peter Hitzler, Sales Manager (Industry) at ProMinent Deutschland GmbH, looks back on a successful event: "As part of the International PUMPENplatz stand, we came into contact with excellent leads in Germany and abroad. Our components and systems for the efficient, environmentally friendly and sustainable handling of liquid media met with great approval," he says.