Electrolysis System CHLORINSITU® V
Output 100 – 3,500 g/h of chlorine
Ultra-pure active chlorine gas is generated in a vacuum process using the electrolysis system CHLORINSITU® V. Suited to applications for metering hypochlorous acid and simultaneously correcting the pH value.
Chlorine and sodium hydroxide made from common salt. Directly on site.
Electrolysis Chlorine and sodium hydroxide are produced in-situ in electrolysis by passing an electric ... more in the glossary systems of type CHLORINSITU® V generate ultra-pure chlorine gas in a vacuum process Process which allows high-purity substances (e.g. active chlorine) to be generated through the absence of oxygen and other gases. more in the glossary. A saturated solution of sodium chloride is produced in a salt-dissolving tank, included in the scope of delivery, and this solution is then electrolysed in a diaphragm cell. Chloride-free sodium hydroxide and hydrogen are produced in the cathode chamber, while ultra-pure chlorine gas and dilute residual Describes the ability of a substance to have a long-term effect and ... more in the glossary brine are produced in the anode chamber, separated by the diaphragm from the cathode chamber. The chlorine gas produced is suctioned off through an injector (contained in the scope of delivery) and fully dissolved as hypochlorous acid in the water being treated (through a bypass). The chlorinated water is then distributed throughout the various pools via one or more proportionately controllable motor driven ball valves. The vacuum is kept stable by a single frequency-controlled booster pump, thereby permitting significant savings in terms of energy. The chloride-free sodium hydroxide is stored temporarily and can be used for pH value The pH value is a measure of the acidic or basic character of an aqueous solution. more in the glossary correction. A standard diaphragm metering pump is first used to correct the base (pH 6.8 – 7) of the superchlorinated water. The fine correction of the pH value The pH value is a measure of the acidic or basic character of an aqueous solution. more in the glossary is provided via additional alkali metering pumps for each circuit or point of injection. The hydrogen produced is diluted with fresh air through an ATEX 95-compliant fan and discharged safely. The diluted residual Describes the ability of a substance to have a long-term effect and ... more in the glossary brine is fully discarded. To achieve this, the diluted brine is strongly diluted with softened water, neutralised by the addition of sodium hydroxide and disposed of. All residual Describes the ability of a substance to have a long-term effect and ... more in the glossary chloride and chlorate is thus disposed of and not mixed with the process water. Electrolysis Chlorine and sodium hydroxide are produced in-situ in electrolysis by passing an electric ... more in the glossary systems of type CHLORINSITU® V can thus be compared with pure chlorine gas in terms of their oxidation strength and chloride / chlorate content in the process water. The salt-dissolving water comes from a softener integrated in the system, preventing the formation of lime deposits and ensuring the long service life of the diaphragm cell. The efficiency of electrolysis Chlorine and sodium hydroxide are produced in-situ in electrolysis by passing an electric ... more in the glossary is constantly monitored by various flow meters, the addition of water depending on the sodium hydroxide production and the base pH correction.
- Chlorination and pH value adjustment with a single system
- Exceedingly low chloride and chlorate content
- Production and metering of high-purity hypochlorous acid without temporary storage
- Safe system control with remote diagnosis by Remote Control Engineer
- Excellent service life of the diaphragm cells, thanks to a constant vacuum
- Maximum operating safety due to their design as negative pressure systems
Field of application
- Potable water
- Waste water
- Process water
- Swimming pool water
- Cooling tower
- Modern PLC with large illuminated display
- Integrated Remote Control Engineer for remote diagnosis and troubleshooting
- Chlorine metering and pH value correction controlled via contact inputs
- Analogue input (optional)
- MODBUS or PROFIBUS® (optional)
- Several points of injection (optional)
- Multiple booster pumps (optional) can be used for different water qualities (e.g. brine and freshwater pools)
Power supply 3 x 400 V (VAC/3P/N/PE/50 Hz)
|Type/output||Fuse||Power uptake||Max. salt consumption||Max. consumption of process water||Consumption of cooling water (external)||Dimensions L x W x H (mm)||Brine tank|
|100||3 x 16||1.10||5||60||–||1,655 x 600 x 1,550||210|
|200||3 x 16||1.50||10||60||–||1,655 x 600 x 1,550||210|
|300||3 x 16||1.90||15||60||–||1,655 x 600 x 1,550||210|
|400||3 x 16||2.30||20||60||–||1,655 x 600 x 1,550||210|
|500||3 x 16||2.70||25||60||–||1,655 x 600 x 1,550||210|
|600||3 x 20||3.10||30||90||–||1,950 x 600 x 2,000||400|
|750||3 x 25||3.70||35||90||–||1,950 x 600 x 2,000||400|
|1,000||3 x 25||4.70||50||90||–||1,950 x 600 x 2,000||400|
|1,250||3 x 35||5.70||60||90||–||1,950 x 600 x 2,000||400|
|1,500||3 x 35||6.70||70||90||–||1,950 x 600 x 2,000||400|
|1,750||3 x 35||7.70||80||90||–||1,950 x 600 x 2,000||400|
|2,000||3 x 50||8.70||100||175||200||1,750 x 1,200 x 2,000||520|
|2,500||3 x 63||10.70||150||175||250||1,750 x 1,200 x 2,000||520|
|3,000||3 x 63||12.70||175||175||300||1,750 x 1,200 x 2,000||520|
|3,500||3 x 80||14.70||175||175||350||1,750 x 1,200 x 2,000||520|
Capacities > 3,500 g/h upon request
Scope of delivery:
Electrolysis systems of type CHLORINSITU® V are ready mounted, wired for use, on a powder coated stainless steel frame with a Programmable Logic Controller (PLC) in the control cabinet, Remote Control Engineer for remote diagnosis and troubleshooting, integral water softening unit, diaphragm electrolysis cells, ATEX-95-compliant bleed system and separate salt dissolving tank with level monitoring. The scope of delivery also includes a frequency-controlled central injector system matched to the system to meter active chlorine and sodium hydroxide for pH correction and a single booster pump. A chlorine gas detector unit and automatic monitoring of water hardness downstream of the softening system come as standard with systems producing more than 600 g/h.
Electrolysis systems of type CHLORINSITU® II, III, V and V Plus are offered and planned to meet customer specifications. This is true both for the system documentation and the subsequent supply of spare parts and maintenance.
Downloads for Electrolysis System CHLORINSITU® V
The server is temporarily unable to service your request due to maintenance downtime or capacity problems. Please try again later.