Motor-Driven Metering Pump Vario C
Capacity range 8 – 76 l/h, 10 – 4 bar
The motor-driven metering pump Vario C delivers a high level of process quality for continuous metering within simple metering tasks. It can be used, for example, in the metering of additives or flocculants in chemical metering.
Product description
The basic pump for simple applications
With 4 gear reduction ratios, 2 dosing head The dosing head is where the actual dosing process takes place. more in the glossary sizes and 2 dosing head The dosing head is where the actual dosing process takes place. more in the glossary materials, the Vario C motor-driven metering pump is well adapted to basic metering tasks. It is available with a three-phase or single-phase AC motor. Its pump capacity is adjusted via the stroke length, in 1% increments, with a self-locking rotary dial.
Your benefits
- Excellent suction capacity, gentle metering stroke and consistently precise metering
- Excellent process quality: Metering reproducibility is better than ± 2% within the stroke length adjustment range of 30 to 100%
- Flexible adjustment of the pump capacity by means of the stroke length in 1% increments
- Fibreglass-reinforced plastic housing
- Good adaptation to the specific application, thanks to 4 different gear reduction ratios and 2 sizes of liquid ends in 2 material versions
- Power end optionally available with three-phase or single-phase AC motor
Field of application
- Chemical metering in potable water, cooling and waste water circuits
- Metering of additives, flocculants etc.
Technical Details
- Stroke length: 3 mm
- Stroke length adjustment range: 0 – 100 %
- Stroke length adjustment: manually by means of self-locking rotary dial
- Metering reproducibility is better than ±2% in the 30 – 100% stroke length adjustment range under defined conditions and with correct installation
- Wetted materials: PVDF, stainless steel 1.4571/1.4404
- DEVELOPAN® diaphragm (single diaphragm with PTFE)
- Motor: Three-phase AC motor (0.07 KW, 230/400 V, 50/60 Hz) or single-phase AC motor (0.06 kW, 230 V 50 Hz or 115 V 60 Hz)
- Degree of protection: IP 55
- Fibreglass-reinforced plastic housing
- Provide suitable overload protection in all motor-driven metering pumps during installation for safety reasons.
Type VAMc | With 1500 rpm motor at 50 Hz | With 1800 rpm motor at 60 Hz | Suction lift | Perm. pre-pressure suction side | Connection, suction/discharge side | |||||
---|---|---|---|---|---|---|---|---|---|---|
Delivery rate at max. back pressure | Max. stroke rate | Delivery rate at max. back pressure | Max. stroke rate | |||||||
bar | l/h | ml/stroke | Strokes/min | psi | l/h/gph (US) | Strokes/min | m WC | bar | G–DN | |
10008 | 10 | 8 | 4 | 38 | 145 | 9.6/2.5 | 45 | 7 | 2.8 | 3/4–10 |
10016 | 10 | 16 | 4 | 77 | 145 | 19.2/5.0 | 92 | 7 | 2.8 | 3/4–10 |
07026 | 7 | 26 | 4 | 120 | 100 | 31.2/8.2 | 144 | 7 | 2.8 | 3/4–10 |
07042 | 7 | 42 | 4 | 192 | 100 | 50.4/13.3 | 230 | 7 | 2.8 | 3/4–10 |
07012 | 7 | 12 | 5 | 38 | 100 | 14.4/3.8 | 45 | 6 | 1.7 | 3/4–10 |
07024 | 7 | 24 | 5 | 77 | 100 | 28.8/7.6 | 92 | 6 | 1.7 | 3/4–10 |
04039 | 4 | 40 | 5 | 120 | 58 | 48.0/12.6 | 144 | 6 | 1.7 | 3/4–10 |
04063 | 4 | 64 | 5 | 192 | 58 | 76.8/20.2 | 230 | 6 | 1.7 | 3/4–10 |
The shipping weight of all pump types is 6/7.2 kg (PVDF/SS)
Materials in Contact With the Medium
Material | Dosing head | Suction/pressure connector | Seals | Valve balls | Valve seat |
---|---|---|---|---|---|
PVT | PVDF | PVDF | PTFE | Ceramic | PTFE |
SST | Stainless steel material no. 1.4404 | Stainless steel material no. 1.4581 | PTFE | Stainless steel material no. 1.4404 | PTFE |
Motor Data
Identity code characteristic | Voltage supply | Remarks | |||
---|---|---|---|---|---|
S | 3 ph, IP 55 | 220-240 V/380-420 V | 50 Hz | 0.07 kW | |
250-280 V/440-480 V | 60 Hz | 0.07 kW | |||
M | 1 ph AC, IP 55 | 230 V ±5% | 50/60 Hz | 0.06 kW | |
N | 1 ph AC, IP 55 | 115 V ±5% | 60 Hz | 0.06 kW |
Motor data sheets can be requested for more information. Special motors or special motor flanges are available on request.
Motors less than 0.75 kW and motors designed for speed-controllable operation are not subject to the IE3 standard in compliance with the Ecodesign Directive 2009/125/EC.
Downloads for Motor-Driven Metering Pump Vario C
Service Unavailable
The server is temporarily unable to service your request due to maintenance downtime or capacity problems. Please try again later.
Overview
The basic pump for simple applications
With 4 gear reduction ratios, 2 dosing head The dosing head is where the actual dosing process takes place. more in the glossary sizes and 2 dosing head The dosing head is where the actual dosing process takes place. more in the glossary materials, the Vario C motor-driven metering pump is well adapted to basic metering tasks. It is available with a three-phase or single-phase AC motor. Its pump capacity is adjusted via the stroke length, in 1% increments, with a self-locking rotary dial.
Your benefits
- Excellent suction capacity, gentle metering stroke and consistently precise metering
- Excellent process quality: Metering reproducibility is better than ± 2% within the stroke length adjustment range of 30 to 100%
- Flexible adjustment of the pump capacity by means of the stroke length in 1% increments
- Fibreglass-reinforced plastic housing
- Good adaptation to the specific application, thanks to 4 different gear reduction ratios and 2 sizes of liquid ends in 2 material versions
- Power end optionally available with three-phase or single-phase AC motor
Application
Field of application
- Chemical metering in potable water, cooling and waste water circuits
- Metering of additives, flocculants etc.
Technical Data
Technical Details
- Stroke length: 3 mm
- Stroke length adjustment range: 0 – 100 %
- Stroke length adjustment: manually by means of self-locking rotary dial
- Metering reproducibility is better than ±2% in the 30 – 100% stroke length adjustment range under defined conditions and with correct installation
- Wetted materials: PVDF, stainless steel 1.4571/1.4404
- DEVELOPAN® diaphragm (single diaphragm with PTFE)
- Motor: Three-phase AC motor (0.07 KW, 230/400 V, 50/60 Hz) or single-phase AC motor (0.06 kW, 230 V 50 Hz or 115 V 60 Hz)
- Degree of protection: IP 55
- Fibreglass-reinforced plastic housing
- Provide suitable overload protection in all motor-driven metering pumps during installation for safety reasons.
Type VAMc | With 1500 rpm motor at 50 Hz | With 1800 rpm motor at 60 Hz | Suction lift | Perm. pre-pressure suction side | Connection, suction/discharge side | |||||
---|---|---|---|---|---|---|---|---|---|---|
Delivery rate at max. back pressure | Max. stroke rate | Delivery rate at max. back pressure | Max. stroke rate | |||||||
bar | l/h | ml/stroke | Strokes/min | psi | l/h/gph (US) | Strokes/min | m WC | bar | G–DN | |
10008 | 10 | 8 | 4 | 38 | 145 | 9.6/2.5 | 45 | 7 | 2.8 | 3/4–10 |
10016 | 10 | 16 | 4 | 77 | 145 | 19.2/5.0 | 92 | 7 | 2.8 | 3/4–10 |
07026 | 7 | 26 | 4 | 120 | 100 | 31.2/8.2 | 144 | 7 | 2.8 | 3/4–10 |
07042 | 7 | 42 | 4 | 192 | 100 | 50.4/13.3 | 230 | 7 | 2.8 | 3/4–10 |
07012 | 7 | 12 | 5 | 38 | 100 | 14.4/3.8 | 45 | 6 | 1.7 | 3/4–10 |
07024 | 7 | 24 | 5 | 77 | 100 | 28.8/7.6 | 92 | 6 | 1.7 | 3/4–10 |
04039 | 4 | 40 | 5 | 120 | 58 | 48.0/12.6 | 144 | 6 | 1.7 | 3/4–10 |
04063 | 4 | 64 | 5 | 192 | 58 | 76.8/20.2 | 230 | 6 | 1.7 | 3/4–10 |
The shipping weight of all pump types is 6/7.2 kg (PVDF/SS)
Materials in Contact With the Medium
Material | Dosing head | Suction/pressure connector | Seals | Valve balls | Valve seat |
---|---|---|---|---|---|
PVT | PVDF | PVDF | PTFE | Ceramic | PTFE |
SST | Stainless steel material no. 1.4404 | Stainless steel material no. 1.4581 | PTFE | Stainless steel material no. 1.4404 | PTFE |
Motor Data
Identity code characteristic | Voltage supply | Remarks | |||
---|---|---|---|---|---|
S | 3 ph, IP 55 | 220-240 V/380-420 V | 50 Hz | 0.07 kW | |
250-280 V/440-480 V | 60 Hz | 0.07 kW | |||
M | 1 ph AC, IP 55 | 230 V ±5% | 50/60 Hz | 0.06 kW | |
N | 1 ph AC, IP 55 | 115 V ±5% | 60 Hz | 0.06 kW |
Motor data sheets can be requested for more information. Special motors or special motor flanges are available on request.
Motors less than 0.75 kW and motors designed for speed-controllable operation are not subject to the IE3 standard in compliance with the Ecodesign Directive 2009/125/EC.
Downloads
Downloads for Motor-Driven Metering Pump Vario C
Service Unavailable
The server is temporarily unable to service your request due to maintenance downtime or capacity problems. Please try again later.