Injection Valve for Low-Pressure Metering Pumps

Suggestions

Products

Product description

The right support for every metering task

Injection valves are mounted at the point of injection to connect the metering line. They protect against backflow and generate a defined back pressure.

With the PP, PVC, PVDF and stainless steel version, the injection valve with ball check is spring-loaded with a Hastelloy C spring, priming pressure approx. 0.5 bar (with R1/4 connector, spring made of stainless steel no. 1.4571, priming pressure approx. 1 bar). They may be fitted in any position.

The TT version without a spring is suitable for vertical installation from below. Valve springs can be retrofitted.

Injection valve sizes DN 10 and 15 have union nuts and inserts/hose nozzles in the scope of delivery.

Important: Injection valves are not absolutely leak-tight shut-off devices!

The benefits for you

Used as a check valve – in closed pipe systems to prevent mixing and backflow into the dosing line.
Used as a back pressure generator – in systems with a free drain, to generate a defined back pressure.

PCB Injection Valve

PVC housing, FKM seals, with Hastelloy C spring-loaded check ball, priming pressure approx. 0.5 bar, with extra-long screw-in fitting.

Application when using appropriate metering line

25 °C – max. operating pressure 25 bar for 8/4 design

25 °C – max. operating pressure 16 bar

45 °C – max. operating pressure 7 bar

Connection size	oØ x iØ	Dim. A	Fig.	Order no.
	mm	mm
* Valve spring made from stainless steel 1.4571, priming pressure approx. 0.8 bar
6/4 - R 1/2 for PE/PTFE pipe	6 x 4	119	pk_1_105	924680
8/4 - R 1/2 for PTFE line	8 x 4	119	pk_1_105	1034621
8/5 - R 1/2 for PE/PTFE pipe	8 x 5	119	pk_1_105	924592
12/9 - R 1/2 for PE/PTFE pipe	12 x 9	119	pk_1_105	924594
10/4 - R 1/2 for PVC hose	10 x 4	119	pk_1_105	1002919
12/6 - R 1/2 for PVC hose	12 x 6	119	pk_1_105	924593
6/4 - G 1/4 for PE/PTFE pipe *	6 x 4	62	-	914559

pk_1_105

PCB Injection Valve O-Ring Loaded

PVC body, FKM seals, priming pressure approx. 0.5 bar.

Application when using an appropriate dosing line

25 °C – max. operating pressure 16 bar

45 °C – max. operating pressure 7 bar

	oØ x iØ	Fig.	Order no.
	mm
6/4 - G 1/4 short	6 x 4	P_AC_0008_SW	914558
6/4 - G 1/4 long	6 x 4	P_AC_0009_SW	915091

p_ac_0008_sw
p_ac_0009_sw

PPB Injection Valve

PP housing, FKM seals with spring-loaded non-return ball, prepressure approx. 0.5 bar.

Application when using an appropriate dosing line

25 °C – max. operating pressure 16 bar

45 °C – max. operating pressure 9 bar

Connection size	oØ x iØ	Dim. A	Fig.	Order no.
	mm	mm
6/4 - R 1/2 for PE/PTFE pipe	6 x 4	119	pk_1_105	924682
8/5 - R 1/2 for PE/PTFE pipe	8 x 5	119	pk_1_105	924687
12/9 - R 1/2 for PE/PTFE pipe	12 x 9	119	pk_1_105	924688
10/4 - R 1/2 for PVC hose	10 x 4	119	pk_1_105	1002921
12/6 - R 1/2 for PVC hose	12 x 6	119	pk_1_105	924689

pk_1_105

PPB Injection Valve O-Ring Loaded

PP body, FKM seals. Priming pressure approx. 0.5 bar.

Application when using an appropriate dosing line

25 °C – max. operating pressure 16 bar

45 °C – max. operating pressure 9 bar

	oØ x iØ	Fig.	Order no.
	mm
6/4 - G 1/4 short	6 x 4	P_AC_0008_SW	914754
6/4 - G 1/4 long	6 x 4	P_AC_0009_SW	741193

p_ac_0008_sw
p_ac_0009_sw

PPE Injection Valve

PP housing, EPDM seals with non-return ball, spring-loaded with Hastelloy C spring, prepressure approx. 0.5 bar with extended screwed socket.

Application when using an appropriate dosing line

25 °C – max. operating pressure 16 bar

45 °C – max. operating pressure 9 bar

Connection size	oØ x iØ	Dim. A	Fig.	Order no.
	mm	mm
* Valve spring made from stainless steel 1.4571, priming pressure approx. 0.8 bar
6/4 - R 1/2 for PE/PTFE pipe	6 x 4	119	pk_1_105	924681
8/5 - R 1/2 for PE/PTFE pipe	8 x 5	119	pk_1_105	809476
12/9 - R 1/2 for PE/PTFE pipe	12 x 9	119	pk_1_105	809478
10/4 - R 1/2 for PVC hose	10 x 4	119	pk_1_105	1002920
12/6 - R 1/2 for PVC hose	12 x 6	119	pk_1_105	809477
6/4 - G 1/4 for PE/PTFE pipe *	6 x 4	62	pk_1_042	914184

pk_1_105
pk_1_042

PP/PTFE Injection Valve

For prevention of chemical deposits. PP body, PTFE mounting insert, EPDM seals with ball check and Hastelloy C spring approx. 0.5 bar priming pressure (Fig. pk_1_046).

Application when using an appropriate dosing line

25 °C – max. operating pressure 16 bar

45 °C – max. operating pressure 9 bar

Connection size	oØ x iØ	Dim. A	Fig.	Order no.
	mm	mm
6/4 - R 1/2 for PE/PTFE pipe	6 x 4	103	pk_1_046	924588
8/5 - R 1/2 for PE/PTFE pipe	8 x 5	103	pk_1_046	924589
12/9 - R 1/2 for PE/PTFE pipe	12 x 9	106	pk_1_046	924590
10/4 - R 1/2 for PVC hose	10 x 4	106	pk_1_046	1002923
12/6 - R 1/2 for PVC hose	12 x 6	106	pk_1_046	924591

pk_1_046

PTFE Injection Valve O-Ring Loaded

PTFE housing, FKM seals.

Application when using appropriate metering line

25 °C – max. operating pressure 10 bar

45 °C – max. operating pressure 6 bar

Connection size	oØ x iØ	Dim. A	Fig.	Order no.
	mm	mm
6/4 – for PE/PTFE line	6 x 4	104	P_AC_0183_SW	809484
8/5 – for PE/PTFE line	8 x 5	104	P_AC_0183_SW	809485
10/4 – for PVC hose	10 x 4	104	P_AC_0183_SW	1002925
12/6 – for PVC hose	12 x 6	104	P_AC_0183_SW	809487
12/9 – for PE/PTFE line	12 x 9	104	P_AC_0183_SW	809486

p_ac_0183_sw

PVC/PTFE Injection Valve

PVC body, PTFE mounting insert, FKM-B seals, spring-loaded ball check with Hastelloy C spring, approx. 0.5 bar priming pressure.

Application when using an appropriate dosing line

25 °C – max. operating pressure 16 bar

45 °C – max. operating pressure 7 bar

	oØ x iØ	Fig.	Order no.
	mm
6/4 - R 1/2 for PE/PTFE pipe	6 x 4	pk_1_046	809450
8/5 - R 1/2 for PE/PTFE pipe	8 x 5	pk_1_046	809451
12/9 - R 1/2 for PE/PTFE pipe	12 x 9	pk_1_046	809452
10/4 - R 1/2 for PVC hose	10 x 4	pk_1_046	1002924
12/6 - R 1/2 for PVC hose	12 x 6	pk_1_046	809453

pk_1_046

Injection valve PVT and PVT FDA

PVDF housing, PTFE seals, with Hastelloy C spring-loaded ball check, priming pressure approx. 0.5 bar, with extra-long screw-in fitting. In the FDA-compliant design, the spring is made from 1.4571.

DN 10, DN 15	With union nut and hose sleeve
DN 20 to DN 40	No connection parts

Application when using appropriate metering line

25 °C – max. operating pressure 25 bar for 8x4 design

25 °C – max. operating pressure 20 bar for 6x3 design

25 °C – max. operating pressure 16 bar

45 °C – max. operating pressure 12 bar

Connection size	oØ x iØ	Dim. A	Fig.	Order no.
	mm	mm
6/3 - R 1/2 for PTFE pipe	6 x 3	119	pk_1_105	1024713
6/4 - R 1/2 for PE/PTFE pipe	6 x 4	119	pk_1_105	1024708
8/4 - R 1/2 for PTFE line	8 x 4	119	pk_1_105	1034619
8/5 - R 1/2 for PE/PTFE pipe	8 x 5	119	pk_1_105	1024710
12/9 - R 1/2 for PE/PTFE pipe	12 x 9	119	pk_1_105	1024711
10/4 - R 1/2 for PVC hose	10 x 4	119	pk_1_105	1024709
12/6 - R 1/2 for PVC hose	12 x 6	119	pk_1_105	1024712
Universal – R 1/2 FDA-compliant	6 x 4 - 12 x 9	119	pk_1_105	1081423

pk_1_105

PVT Injection Valve with Tantalum Spring

Injection valve specially designed for metering sodium-calcium hypochlorite, with universal hose connector kit 6 x 4, 8 x 4, 8 x 5, 12 x 9, 10 x 4 and 12 x 6 mm.

PVDF housing, PTFE seals, with tantalum spring-loaded check ball, priming pressure approx. 0.5 bar, with extra-long screw-in fitting.

Application when using appropriate metering line

25 °C – max. operating pressure 25 bar for 8x4 design

25 °C – max. operating pressure 20 bar for 6x3 design

25 °C – max. operating pressure 16 bar

45 °C – max. operating pressure 12 bar

	Dim. A	Fig.	Order no.
	mm
Universal connector, R 1/2	119	pk_1_105	1044653

pk_1_105

PVT injection valve with FEP-coated spring

Injection valve, with universal hose connector kit 6 x 4, 8 x 4, 8 x 5, 12 x 9, 10 x 4 and 12 x 6 mm. PVDF housing, PTFE seals, with spring-loaded ball check with FEP-coated spring, priming pressure approx. 1 bar, with extra-long screw-in fitting.

Application when using appropriate metering line

25 °C – max. operating pressure 25 bar for 8x4 design

25 °C – max. operating pressure 20 bar for 6x3 design

25 °C – max. operating pressure 16 bar

45 °C – max. operating pressure 12 bar

	Dimension A	Fig.	Order no.
	mm
Universal connector, R 1/2	119	pk_1_105	1110471

pk_1_105

SST Injection Valve

Housing made of stainless steel no. 1.4404, PTFE seals, with Hastelloy C spring-loaded check ball, priming pressure approx. 0.5 bar, with R 1/4 spring made of stainless steel no. 1.4571, priming pressure approx. 1 bar. A support insert is required to connect PE / PTFE lines. 1.4571 spring with FDA-compliant design.

Application when using an appropriate dosing line

45 °C – max. operating pressure 30 bar

Connection size	oØ x iØ	Dim. A	Fig.	Order no.
	mm	mm
6 mm - R 1/2 for pipe	6 x 5	93	pk_1_032_1	809489
8 mm - R 1/2 for pipe	8 x 7	93	pk_1_032_1	809482
12 mm - R 1/2 for pipe	12 x 10	96	pk_1_032_1	809483
1/4" NPT - R 1/2 for pipe	R 1/4" NPT	89	pk_1_032_2	924597
6 mm - R 1/4 for pipe	-	-	P_AC_0253_SW	914588
6 mm - R 1/2 for pipe, FDA-compliant	6 x 5	93	pk_1_032_1	1081482
8 mm - R 1/2 for pipe, FDA-compliant	8 x 7	93	pk_1_032_1	1081483
12 mm - R 1/2 for pipe, FDA-compliant	12 x 10	96	pk_1_032_1	1081504

pk_1_032_1
pk_1_032_2

TTT Injection Valve

Vertical installation from below. With ball check, without spring. Valve spring (Order No. 469404) can be retrofitted. Body and seals made of PTFE.

Application when using an appropriate dosing line

25 °C – max. operating pressure 10 bar

45 °C – max. operating pressure 5 bar

Connection size	oØ x iØ	Dim. A	Fig.	Order no.
	mm	mm
6/4 - R 1/2 for PE/PTFE pipe	6 x 4	98	P_AC_0184_SW	809488
8/5 - R 1/2 for PE/PTFE pipe	8 x 5	98	P_AC_0184_SW	809479
12/9 - R 1/2 for PE/PTFE pipe	12 x 9	101	P_AC_0184_SW	809481
12/6 - R 1/2 for PVC hose	12 x 6	101	P_AC_0184_SW	809480

p_ac_0184_sw

Lip Seal Injection Valve PCB

Body PVC, seals FKM, inlet pressure approx. 0.05 bar. For metering sodium hypochlorite and for use in conjunction with the peristaltic pump DF2a.

Application when using appropriate metering line

25 °C – max. operating pressure 2 bar

45 °C – max. operating pressure 2 bar

Connection size	oØ x iØ	Dim. A	Fig.	Order no.
	mm	mm
6/4 - R 1/2 - 1/4 for PE/PTFE pipe	6 x 4	90	pk_1_070	1019953
10/4 - R 1/2 - 1/4 for PE/PTFE pipe	10 x 4	90	pk_1_070	1024697

pk_1_070

Metering Connector for Warm Water up to 200 °C

Consists of stainless steel 1.4404 injection valve, 1 m stainless steel 1.4571 discharge line and threaded connector with reinforcing sleeve for connection of PE/PTFE pipe to stainless steel pipe.

Operating pressure max. 40 bar

Connection size	Fig.	Order no.

Warm water 6 mm - R 1/4	pk_1_049	913166
Warm water 6 mm - R 1/2	pk_1_049	913167
Warm water 8 mm - R 1/2	pk_1_049	913177
Warm water 12 mm - R 1/2	pk_1_049	913188

pk_1_049

Downloads for Injection Valve for Low-Pressure Metering Pumps

Selected filters:

Matching downloads

Sort by A to Z

Document type

Load more matches ...

No more matches available!

Unfortunately, we did not find an appropriate match.

All words written correctly?
Search again with fewer or different search terms?

Please try again later

Service Unavailable

The server is temporarily unable to service your request due to maintenance downtime or capacity problems. Please try again later.

Overview

The right support for every metering task

Injection valves are mounted at the point of injection to connect the metering line. They protect against backflow and generate a defined back pressure.

The TT version without a spring is suitable for vertical installation from below. Valve springs can be retrofitted.

Injection valve sizes DN 10 and 15 have union nuts and inserts/hose nozzles in the scope of delivery.

Important: Injection valves are not absolutely leak-tight shut-off devices!

The benefits for you

Used as a check valve – in closed pipe systems to prevent mixing and backflow into the dosing line.
Used as a back pressure generator – in systems with a free drain, to generate a defined back pressure.

Technical Data

Connection size	oØ x iØ	Dim. A	Fig.	Order no.
* Valve spring made from stainless steel 1.4571, priming pressure approx. 0.8 bar
6/4 - R 1/2 for PE/PTFE pipe	6 x 4	119	pk_1_105	924680
8/4 - R 1/2 for PTFE line	8 x 4	119	pk_1_105	1034621
8/5 - R 1/2 for PE/PTFE pipe	8 x 5	119	pk_1_105	924592
12/9 - R 1/2 for PE/PTFE pipe	12 x 9	119	pk_1_105	924594
10/4 - R 1/2 for PVC hose	10 x 4	119	pk_1_105	1002919
12/6 - R 1/2 for PVC hose	12 x 6	119	pk_1_105	924593
6/4 - G 1/4 for PE/PTFE pipe *	6 x 4	62	-	914559

	oØ x iØ	Fig.	Order no.
6/4 - G 1/4 short	6 x 4	P_AC_0008_SW	914558
6/4 - G 1/4 long	6 x 4	P_AC_0009_SW	915091

Connection size	oØ x iØ	Dim. A	Fig.	Order no.
6/4 - R 1/2 for PE/PTFE pipe	6 x 4	119	pk_1_105	924682
8/5 - R 1/2 for PE/PTFE pipe	8 x 5	119	pk_1_105	924687
12/9 - R 1/2 for PE/PTFE pipe	12 x 9	119	pk_1_105	924688
10/4 - R 1/2 for PVC hose	10 x 4	119	pk_1_105	1002921
12/6 - R 1/2 for PVC hose	12 x 6	119	pk_1_105	924689

	oØ x iØ	Fig.	Order no.
6/4 - G 1/4 short	6 x 4	P_AC_0008_SW	914754
6/4 - G 1/4 long	6 x 4	P_AC_0009_SW	741193

Connection size	oØ x iØ	Dim. A	Fig.	Order no.
* Valve spring made from stainless steel 1.4571, priming pressure approx. 0.8 bar
6/4 - R 1/2 for PE/PTFE pipe	6 x 4	119	pk_1_105	924681
8/5 - R 1/2 for PE/PTFE pipe	8 x 5	119	pk_1_105	809476
12/9 - R 1/2 for PE/PTFE pipe	12 x 9	119	pk_1_105	809478
10/4 - R 1/2 for PVC hose	10 x 4	119	pk_1_105	1002920
12/6 - R 1/2 for PVC hose	12 x 6	119	pk_1_105	809477
6/4 - G 1/4 for PE/PTFE pipe *	6 x 4	62	pk_1_042	914184

Connection size	oØ x iØ	Dim. A	Fig.	Order no.
6/4 - R 1/2 for PE/PTFE pipe	6 x 4	103	pk_1_046	924588
8/5 - R 1/2 for PE/PTFE pipe	8 x 5	103	pk_1_046	924589
12/9 - R 1/2 for PE/PTFE pipe	12 x 9	106	pk_1_046	924590
10/4 - R 1/2 for PVC hose	10 x 4	106	pk_1_046	1002923
12/6 - R 1/2 for PVC hose	12 x 6	106	pk_1_046	924591

Connection size	oØ x iØ	Dim. A	Fig.	Order no.
6/4 – for PE/PTFE line	6 x 4	104	P_AC_0183_SW	809484
8/5 – for PE/PTFE line	8 x 5	104	P_AC_0183_SW	809485
10/4 – for PVC hose	10 x 4	104	P_AC_0183_SW	1002925
12/6 – for PVC hose	12 x 6	104	P_AC_0183_SW	809487
12/9 – for PE/PTFE line	12 x 9	104	P_AC_0183_SW	809486

	oØ x iØ	Fig.	Order no.
6/4 - R 1/2 for PE/PTFE pipe	6 x 4	pk_1_046	809450
8/5 - R 1/2 for PE/PTFE pipe	8 x 5	pk_1_046	809451
12/9 - R 1/2 for PE/PTFE pipe	12 x 9	pk_1_046	809452
10/4 - R 1/2 for PVC hose	10 x 4	pk_1_046	1002924
12/6 - R 1/2 for PVC hose	12 x 6	pk_1_046	809453

Connection size	oØ x iØ	Dim. A	Fig.	Order no.
6/3 - R 1/2 for PTFE pipe	6 x 3	119	pk_1_105	1024713
6/4 - R 1/2 for PE/PTFE pipe	6 x 4	119	pk_1_105	1024708
8/4 - R 1/2 for PTFE line	8 x 4	119	pk_1_105	1034619
8/5 - R 1/2 for PE/PTFE pipe	8 x 5	119	pk_1_105	1024710
12/9 - R 1/2 for PE/PTFE pipe	12 x 9	119	pk_1_105	1024711
10/4 - R 1/2 for PVC hose	10 x 4	119	pk_1_105	1024709
12/6 - R 1/2 for PVC hose	12 x 6	119	pk_1_105	1024712
Universal – R 1/2 FDA-compliant	6 x 4 - 12 x 9	119	pk_1_105	1081423

	Dim. A	Fig.	Order no.
Universal connector, R 1/2	119	pk_1_105	1044653

	Dimension A	Fig.	Order no.
Universal connector, R 1/2	119	pk_1_105	1110471

Connection size	oØ x iØ	Dim. A	Fig.	Order no.
6 mm - R 1/2 for pipe	6 x 5	93	pk_1_032_1	809489
8 mm - R 1/2 for pipe	8 x 7	93	pk_1_032_1	809482
12 mm - R 1/2 for pipe	12 x 10	96	pk_1_032_1	809483
1/4" NPT - R 1/2 for pipe	R 1/4" NPT	89	pk_1_032_2	924597
6 mm - R 1/4 for pipe	-	-	P_AC_0253_SW	914588
6 mm - R 1/2 for pipe, FDA-compliant	6 x 5	93	pk_1_032_1	1081482
8 mm - R 1/2 for pipe, FDA-compliant	8 x 7	93	pk_1_032_1	1081483
12 mm - R 1/2 for pipe, FDA-compliant	12 x 10	96	pk_1_032_1	1081504

Connection size	oØ x iØ	Dim. A	Fig.	Order no.
6/4 - R 1/2 for PE/PTFE pipe	6 x 4	98	P_AC_0184_SW	809488
8/5 - R 1/2 for PE/PTFE pipe	8 x 5	98	P_AC_0184_SW	809479
12/9 - R 1/2 for PE/PTFE pipe	12 x 9	101	P_AC_0184_SW	809481
12/6 - R 1/2 for PVC hose	12 x 6	101	P_AC_0184_SW	809480

Connection size	oØ x iØ	Dim. A	Fig.	Order no.
6/4 - R 1/2 - 1/4 for PE/PTFE pipe	6 x 4	90	pk_1_070	1019953
10/4 - R 1/2 - 1/4 for PE/PTFE pipe	10 x 4	90	pk_1_070	1024697

Connection size	Fig.	Order no.
Warm water 6 mm - R 1/4	pk_1_049	913166
Warm water 6 mm - R 1/2	pk_1_049	913167
Warm water 8 mm - R 1/2	pk_1_049	913177
Warm water 12 mm - R 1/2	pk_1_049	913188

Downloads

Contact us

ProMinent GmbH

+49 6221 842 0
Send request

»Please send us your request! We will contact you shortly.«

+49 6221 842 0 Send request

Matching Products

Motor-Driven Metering Pump alpha

Capacity range 1.0 – 30.6 l/h, 10 – 2 bar

The motor-driven metering pump alpha is the metering pump for liquid media and the optimum solution for simple applications. Robust, low-noise, chemical-resistant, with precise metering and good suction capacity.

Solenoid-Driven Metering Pump beta

Capacity range 0.74 – 32 l/h, 25 – 2 bar

All-purpose solenoid-driven metering pump for metering liquid media in water treatment and chemical processes: Solenoid-driven metering pump beta. Cost-effective, overload-proof and adaptable to existing signal transducers.

Solenoid-Driven Metering Pump gamma/ X

Feed rate of product range 1 ml/h – 45 l/h; 25 – 2 bar

The solenoid-driven diaphragm metering pump gamma incorporates a wealth of eX cellent ingenuity! With integrated pressure measurement, it ensures the smooth running of your metering process. The gamma/ X is ideal for all metering work involving liquid media.

ProMinent is winner of the iF DESIGN AWARD 2023 Gold

May 2023

Metering technology manufacturer ProMinent has won the highest distinction – the iF DESIGN AWARD 2023 Gold – and is now one of the top winners of the world-renowned design label. The winning product: Sensor bypass armature Modular BAMa

Metering pumps now certified for food contact under Reg. (EC) 1935/2004

May 2023

ProMinent, a manufacturer of metering technology, has now had all its low pressure metering pumps certified for food contact under Regulation (EC) 1935/2004. The company can therefore provide solutions for applications in which materials and objects come into direct contact with foodstuffs.

Using electrolysis to safely disinfect drinking water

May 2023

The challenge: to supply large quantities of germ-free drinking water The solution: using cooking salt and efficient electrolysis systems Alternative to chlorine gas: using electrolysis for disinfection

ProMinent Brasil LTDA: New company address

March 2023

ProMinent Brasil LTDA has been growing and due to its expansion, it is with great pleasure that we inform you that as of 03 April 2023, our subsidiary in Brazil will operate and be reachable under a new corporate address. The new address is: Rua José Medeiros de Albuquerque, 355 - Jardim Montreal, São Bernardo do Campo - SP, 09662-030

ProMinent inaugurates new offices in Thailand

March 2023

ProMinent Fluid Controls Co. Ltd. recently celebrated the inauguration of its new building in Bangkok, Thailand. The grand opening ceremony was attended by the management of the ProMinent Group.

Efficient sugar syrup disinfection thanks to UV treatment

March 2023

Sugar solutions are a key ingredient in soft drink recipes. However, sugar syrup is particularly susceptible to spores, as well as yeast and mould fungi, which must be reliably eliminated during production.

ProMinent receives TOP 100 seal

February 2023

ProMinent GmbH from Heidelberg has convinced with its innovative qualities and therefore received the TOP 100 seal for the year 2023. The award ceremony with Ranga Yogeshwar, mentor of the TOP 100, will take place in Augsburg on 23 June.

Modern technology for the brewing process

February 2023

...clean water is essential to delicious beer. That’s why Welde draws water from its own well. The long-established brewery uses chlorine dioxide to disinfect its brewing and process water...

Andreas Zühlcke becomes Vice President Product Management & Marketing at ProMinent

January 2023

Andreas Zühlcke has been in charge of "Product Management & Marketing" at the metering technology manufacturer ProMinent since September 2022.

Heidelberg technology to prevent water pollution

December 2022

ProMinent ensures clean drinking water with modern metering technology.

ProMinent at interbad 2022

October 2022

Efficient Pool Water Treatment - Modern Solutions for clean Pool Water October 25-28, 2022 in Stuttgart Visit us in hall 4 at booth C38

ProMinent at drinktec 2022 - Huge interest in reliable metering and disinfection

September 2022

ProMinent showcased practical solutions for requirements across all of the beverage industry's production and filling operations at drinktec. Thomas Eifel, Head of Sales for ProMinent Deutschland GmbH, was pleased with how the show went: "We're very happy with the outcome from drinktec."

Injection Valve for Low-Pressure Metering Pumps

Product description

The right support for every metering task

The benefits for you

PCB Injection Valve

PCB Injection Valve O-Ring Loaded

PPB Injection Valve

PPB Injection Valve O-Ring Loaded

PPE Injection Valve

PP/PTFE Injection Valve

PTFE Injection Valve O-Ring Loaded

PVC/PTFE Injection Valve

Injection valve PVT and PVT FDA

PVT Injection Valve with Tantalum Spring

PVT injection valve with FEP-coated spring

SST Injection Valve

TTT Injection Valve

Lip Seal Injection Valve PCB

Metering Connector for Warm Water up to 200 °C

Downloads for Injection Valve for Low-Pressure Metering Pumps

Selected filters:

Matching downloads

Unfortunately, we did not find an appropriate match.

Service Unavailable

Overview

The right support for every metering task

The benefits for you

Technical Data

PCB Injection Valve

PCB Injection Valve O-Ring Loaded

PPB Injection Valve

PPB Injection Valve O-Ring Loaded

PPE Injection Valve

PP/PTFE Injection Valve

PTFE Injection Valve O-Ring Loaded

PVC/PTFE Injection Valve

Injection valve PVT and PVT FDA

PVT Injection Valve with Tantalum Spring

PVT injection valve with FEP-coated spring

SST Injection Valve

TTT Injection Valve

Lip Seal Injection Valve PCB

Metering Connector for Warm Water up to 200 °C

Downloads

Downloads for Injection Valve for Low-Pressure Metering Pumps

Selected filters:

Matching downloads

Unfortunately, we did not find an appropriate match.

Service Unavailable

Contact us

ProMinent GmbH

Matching Products

Motor-Driven Metering Pump alpha

Solenoid-Driven Metering Pump beta

Solenoid-Driven Metering Pump gamma/ X

Peristaltic Pump DULCOFLEX DF2a

Peristaltic Pump DULCOFLEX DF4a

Solenoid-Driven Metering Pump gamma/ XL

News and Events

ProMinent is winner of the iF DESIGN AWARD 2023 Gold

Metering pumps now certified for food contact under Reg. (EC) 1935/2004

Using electrolysis to safely disinfect drinking water

ProMinent Brasil LTDA: New company address

ProMinent inaugurates new offices in Thailand

Efficient sugar syrup disinfection thanks to UV treatment

ProMinent receives TOP 100 seal

Modern technology for the brewing process

Andreas Zühlcke becomes Vice President Product Management & Marketing at ProMinent

Heidelberg technology to prevent water pollution

ProMinent at interbad 2022

ProMinent at drinktec 2022 - Huge interest in reliable metering and disinfection