Suggestions

Ozone System OZONFILT® OZMa

Ozone capacity 70 – 420 g ozone/h

OZONFILT® OZMa is synonymous with maximum operational safety and minimal operating costs. The ozone generator is maintenance-free and generates up to 420 g/h of ozone from compressed air.

Product description

Powerful and yet environmentally-friendly. Disinfect and oxidise ecologically and economically.

The ozone Significantly less environmentally harmful by-products result from the generation and use of ozone ... more in the glossary systems OZONFILT® OZMa have been designed as pressurised systems, in which the feed gas – air – is fed into the ozone Significantly less environmentally harmful by-products result from the generation and use of ozone ... more in the glossary generator under pressure.

Air is used as the feed gas in the ozone Significantly less environmentally harmful by-products result from the generation and use of ozone ... more in the glossary system Ozonfilt®OZMaA type 1 to 6

The ozone Significantly less environmentally harmful by-products result from the generation and use of ozone ... more in the glossary is generated from the oxygen in the ambient air and simultaneously metered. A demand-driven, self-optimising pressure swing dryer reduces the consumption of compressed air to a minimum. Ozone Significantly less environmentally harmful by-products result from the generation and use of ozone ... more in the glossary can therefore be generated safely and reliably even with a high level of ambient air humidity with ozone Significantly less environmentally harmful by-products result from the generation and use of ozone ... more in the glossary concentrations of up to 20 g/Nm3. Using the suitable mixing equipment, ozone Significantly less environmentally harmful by-products result from the generation and use of ozone ... more in the glossary concentrations of between 3 and 12 ppm can be achieved in the water to be treated, depending on the temperature.

Legal notice for operating ozone Significantly less environmentally harmful by-products result from the generation and use of ozone ... more in the glossary systems in Europe:

For legally compliant operation of ozone Significantly less environmentally harmful by-products result from the generation and use of ozone ... more in the glossary systems in Europe, the system must be approved and/or registered in accordance with the Biocidal Products Regulation (EU) No. 528/2012 or REACH Regulation (EU) No. 1907/2006. As a member of EurO3zon, ProMinent automatically provides the necessary approval for biocidal applications in accordance with the Biocidal Products Regulation on behalf of its customers. Other applications will have to be registered in accordance with REACH. This must be done by the operator but assistance can be provided by EurO3zon. For more information, see https://www.prominent.de/resources/Other/German/26231/20210216-Kunden-Info-BPR-REACH.pdf.

Your benefits

  • Economical: maintenance-free generator concept with virtually unlimited service life
  • Up to 30% energy savings for air treatment, thanks to demand-controlled and self-optimising air drying compared to conventional air treatment.
  • Automatic control of the feed gas depending on the ozone output, therefore reduced consumption of feed gas produced with intensive use of energy.
  • High ozone concentration ensures optimum ozone solubility in water
  • Direct injection without injector system for up to 2 bar back pressure
  • Automatic ozone generation, virtually independent of fluctuations in mains voltage and pressure

Field of application

  • Potable water supply: Oxidation of iron, manganese and arsenic, refinement and taste enhancement and disinfection
  • Waste water treatment: Degradation/reduction of COD and microcontaminants, reduction of sewage sludge
  • Food and beverage industry: Oxidation of iron and manganese, disinfection of potable water and rinser water
  • Swimming pools: Degradation of disinfection by-products, reliable microbiological barrier and production of crystal-clear water thanks to its microflocculating effect
  • Industry: Legionella prevention and disinfection of cooling water
    1 2 3 4 5 6

    Technical Details

    • Compact mounting, ready-to-use in a painted steel cabinet or optionally in a stainless steel cabinet
    • With integrated filter package for the removal of dust and small amounts of residual oil in the compressed air
    • Special dielectric with excellent cooling: in spite of the low cooling water consumption, heat is quickly and efficiently discharged before the ozone produced can decompose due to excessive heat.
    • PLC with integrated ozone measurement and PID control
    • 7" touch panel with data logger and screen plotter
    • Multiple communications interfaces (e.g. LAN, Profibus® DP, ISDN, TCP)
    • Excellent efficiency: over 90% of the ozone is dissolved in the water thanks to the special construction of the mixing unit.
    • Integration of a dew point sensor to monitor the quality of compressed air
    • Integration of an air conditioning unit to adjust the temperature of the ozone system
    • Pause input for external switching on/off
    • Contact input for locking the system, for example in the absence of flow
    • Digital input for connecting a gas detector
    • Digital input for controlling two power stages
    • 0/4-20 mA input for external output control depending on the flow or measured value with a PIC controller
    • Second freely configurable 0/ 4-20 mA input
    • Contact output for operating status
    • Contact output for common alarm message
    • Contact output for limit violation, ozone concentration in the water too low
    • One freely configurable 0/ 4-20 mA output

    Technical Data

    Ozone Generation Systems OZONFILT® OZMa 1-3 A (Process Gas - Air)

    Ambient parameters

    Max. 85% air humidity of the ambient air, non-condensing, non-corrosive, dust-free, max. ambient temperature: 40 °C (with integrated air conditioning system: 50 °C)

    Electrical Connection

    OZMa 1A

    OZMa 2A

    OZMa 3A

    Number of generator modules

    1

    1

    1

    Ozone capacity, measured in accordance with DIN with air at 20 °C, cooling water at 15 °C

    g/h

    70

    105

    140

    Air consumption (only ozone generation)

    Nm3/h

    3.50

    5.25

    7.00

    Ozone concentration in the gas phase referenced to nominal conditions

    g/Nm3

    20

    20

    20

    Specific energy requirement at nominal capacity

    Wh/g

    16.5

    16.5

    16.5

    Power factor at full capacity

    cos φ

    0.95

    0.95

    0.95

    Ozone connection

    Rp 3/8”

    Rp 3/8”

    Rp 3/8”

    Overall Dimensions (Without Mixer)

    OZMa 1A

    OZMa 2A

    OZMa 3A

    Mains connected load V/Hz/A

    V/Hz/A

    230/50;60/10

    230/50;60/16

    230/50;60/16

    Enclosure rating

    IP54

    IP54

    IP54

    Degree of protection with integrated air conditioning unit (internal/external)

    IP 54 / IP 34

    IP 54 / IP 34

    IP 54 / IP 34

    Weight

    OZMa 1A

    OZMa 2A

    OZMa 3A

    Width

    mm

    1,114

    1,114

    1,114

    Height

    mm

    1,961

    1,961

    1,961

    Depth

    mm

    405

    405

    405

    Ozone Mixing

    OZMa 1A

    OZMa 2A

    OZMa 3A

    Weight

    kg

    270

    280

    300

    Air Supply

    OZMa 1A

    OZMa 2A

    OZMa 3A

    Max. raw water temperature

    °C

    35

    35

    35

    Permissible pressure at ozone outlet

    bar

    0.8…2.0

    0.8…2.0

    0.8…2.0

    OZMa 1A

    OZMa 2A

    OZMa 3A

    Air demand

    Nl/min

    73

    110

    147

    Cooling Water

    Air quality

    oil and dust-free, non-corrosive, constant priming pressure of 4.5 – 10 bar, max. temperature 40 ° C

    OZMa 1A

    OZMa 2A

    OZMa 3A

    Cooling water consumption (15 °C)

    l/h

    90

    135

    180

    Cooling water consumption (30 °C)

    l/h

    125

    190

    250

    Cooling water inlet pressure

    bar

    2…5

    2…5

    2…5

    Cooling water outlet, open discharge

    mm

    8 x 5

    8 x 5

    12 x 9

    Cooling water inlet, PE pressure hose

    mm

    8 x 5

    8 x 5

    12 x 9

    Ozone Generation Systems OZONFILT® OZMa 4-6 A (Process Gas - Air)

    Ambient parameters

    Max. 85% air humidity of the ambient air, non-condensing, non-corrosive, dust-free, max. ambient temperature: 40 °C (with integrated air conditioning system: 50 °C)

    Cooling water quality

    No tendency to form lime scale, no corrosive components; sedimentation substances: < 0.1 ml/l; iron: < 0.2 mg/l; manganese: < 0.05 mg/l; conductivity: > 100 µS/cm; chloride: < 250 mg/l

    Electrical Connection

    OZMa 4A

    OZMa 5A

    OZMa 6A

    * Nm3 = m3 under normal [standard] conditions (p = 1.013 x 105 Pa, T = 273 K)

    Number of generator modules

    2

    2

    3

    Ozone capacity, measured in accordance with DIN with air at 20 °C, cooling water at 15 °C

    g/h

    210

    280

    420

    Air consumption (only ozone generation)

    Nm3/h

    10.50

    14.00

    21.00

    Ozone concentration in the gas phase referenced to nominal conditions*

    g/Nm3

    20

    20

    20

    Specific energy requirement at nominal capacity

    Wh/g

    16.5

    16.5

    16.5

    Power factor at full capacity

    cos φ

    0.95

    0.95

    0.95

    Ozone connection

    Rp 3/8”

    Rp 3/8”

    Rp 3/8”

    Overall Dimensions (Without Mixer)

    OZMa 4A

    OZMa 5A

    OZMa 6A

    Mains connected load V/Hz/A

    V/Hz/A

    400/50;60/16

    400/50;60/16

    400/50;60/16

    Enclosure rating

    IP54

    IP54

    IP54

    Degree of protection with integrated air conditioning unit (internal/external)

    IP 54 / IP 34

    IP 54 / IP 34

    IP 54 / IP 34

    Weight

    OZMa 4A

    OZMa 5A

    OZMa 6A

    Width

    mm

    1,320

    1,320

    1,606

    Height

    mm

    1,961

    1,961

    1,961

    Depth

    mm

    605

    605

    605

    Ozone Mixing

    OZMa 4A

    OZMa 5A

    OZMa 6A

    Weight

    kg

    420

    445

    580

    Air Supply

    OZMa 4A

    OZMa 5A

    OZMa 6A

    Max. raw water temperature

    °C

    35

    35

    35

    Permissible pressure at ozone outlet

    bar

    0.8…2.0

    0.8…2.0

    0.8…2.0

    OZMa 4A

    OZMa 5A

    OZMa 6A

    Air demand

    Nl/min

    220

    293

    440

    Cooling Water

    Air quality

    oil and dust-free, non-corrosive, constant priming pressure of 4.5 – 10 bar, max. temperature 40 ° C

    OZMa 4A

    OZMa 5A

    OZMa 6A

    Cooling water consumption (15 °C)

    l/h

    270

    360

    540

    Cooling water consumption (30 °C)

    l/h

    300

    400

    600

    Cooling water inlet pressure

    bar

    2…5

    2…5

    2…5

    Cooling water outlet, open discharge

    mm

    12 x 9

    12 x 9

    12 x 9

    Cooling water inlet, PE pressure hose

    mm

    12 x 9

    12 x 9

    12 x 9

    Cooling water quality

    No tendency to form lime scale, no corrosive components; sedimentation substances: < 0.1 ml/l; iron: < 0.2 mg/l; manganese: < 0.05 mg/l; conductivity: > 100 µS/cm; chloride: < 250 mg/l

    Downloads for Ozone System OZONFILT® OZMa

    More in the Download Centre

    0 Results
    Filter by document type
    Application Example / Reference (0)
    Brochure / Flyer (0)
    Catalogue (0)
    Certificate / Declaration (0)
    Data Sheet (0)
    Drawing / Dimensional Drawing / 3D (0)
    Exploded View / Spare Parts (0)
    Material Safety Data Sheet (0)
    Operating Instructions (0)
    Others (0)
    Press Release (0)
    Publication / Article (0)
    Software (0)
    Wiring Diagram (0)

    Selected filters:

    Matching downloads

    Sort by A to Z
    Load more matches ...
    No more matches available!

    Unfortunately, we did not find an appropriate match.

    All words written correctly?
    Search again with fewer or different search terms?

    Please try again later

    Service Unavailable

    The server is temporarily unable to service your request due to maintenance downtime or capacity problems. Please try again later.

    Overview

    Powerful and yet environmentally-friendly. Disinfect and oxidise ecologically and economically.

    The ozone Significantly less environmentally harmful by-products result from the generation and use of ozone ... more in the glossary systems OZONFILT® OZMa have been designed as pressurised systems, in which the feed gas – air – is fed into the ozone Significantly less environmentally harmful by-products result from the generation and use of ozone ... more in the glossary generator under pressure.

    Air is used as the feed gas in the ozone Significantly less environmentally harmful by-products result from the generation and use of ozone ... more in the glossary system Ozonfilt®OZMaA type 1 to 6

    The ozone Significantly less environmentally harmful by-products result from the generation and use of ozone ... more in the glossary is generated from the oxygen in the ambient air and simultaneously metered. A demand-driven, self-optimising pressure swing dryer reduces the consumption of compressed air to a minimum. Ozone Significantly less environmentally harmful by-products result from the generation and use of ozone ... more in the glossary can therefore be generated safely and reliably even with a high level of ambient air humidity with ozone Significantly less environmentally harmful by-products result from the generation and use of ozone ... more in the glossary concentrations of up to 20 g/Nm3. Using the suitable mixing equipment, ozone Significantly less environmentally harmful by-products result from the generation and use of ozone ... more in the glossary concentrations of between 3 and 12 ppm can be achieved in the water to be treated, depending on the temperature.

    Legal notice for operating ozone Significantly less environmentally harmful by-products result from the generation and use of ozone ... more in the glossary systems in Europe:

    For legally compliant operation of ozone Significantly less environmentally harmful by-products result from the generation and use of ozone ... more in the glossary systems in Europe, the system must be approved and/or registered in accordance with the Biocidal Products Regulation (EU) No. 528/2012 or REACH Regulation (EU) No. 1907/2006. As a member of EurO3zon, ProMinent automatically provides the necessary approval for biocidal applications in accordance with the Biocidal Products Regulation on behalf of its customers. Other applications will have to be registered in accordance with REACH. This must be done by the operator but assistance can be provided by EurO3zon. For more information, see https://www.prominent.de/resources/Other/German/26231/20210216-Kunden-Info-BPR-REACH.pdf.

    Your benefits

    • Economical: maintenance-free generator concept with virtually unlimited service life
    • Up to 30% energy savings for air treatment, thanks to demand-controlled and self-optimising air drying compared to conventional air treatment.
    • Automatic control of the feed gas depending on the ozone output, therefore reduced consumption of feed gas produced with intensive use of energy.
    • High ozone concentration ensures optimum ozone solubility in water
    • Direct injection without injector system for up to 2 bar back pressure
    • Automatic ozone generation, virtually independent of fluctuations in mains voltage and pressure

    Application

    Technical Data

    Downloads

    Contact us

    »Please send us your request! We will contact you shortly.«

    +49 6221 842 0  Send request   

    Matching Products

    1 2 3